<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays]]></title><description><![CDATA[<p dir="auto">So I went on vacation and when I got back found myself back to my habit of just lurking around like I did before the start of 2019...but I found I really wanted to get a bit more info out on my studies.  Originally, I thought it would be a big single thread, but I suppose that's not practical for me right now.  I thought this would be a good way for me to kick off the project with a relatively simple start.</p>
<p dir="auto">I chose the Grand Prix inlay for this first part since they're fairly common and relatively inexpensive.  I've identified at least 4 variants from the '70s.</p>
<p dir="auto">c.'72/73 V1n:</p>
<p dir="auto"><img src="https://live.staticflickr.com/65535/48614919668_6d1d46df7a.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I believe this is the first Grand Prix inlay in Nickel Silver, immediately following the St. Christopher previously used on previous Automobile related models.</p>
<p dir="auto">c. '75 V1s:</p>
<p dir="auto"><img src="https://live.staticflickr.com/65535/48615411647_11fb3cef5d.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Like many other inlays in this period the switch to Stainless Steel with the same tooling used for Nickel Silver proved to wear the tooling quickly.  Note that both 'V1' types have the same details and most definitively in spoke count. Easiest to see the 12 spoke rear wheel.  A c.'76 copy is the same, but with severe enough wear that the cellidor merges in front of the spokes. The c.'75 copy has a black scissor spring and requisite '75 details.</p>
<p dir="auto">c. '77 V2s:</p>
<p dir="auto"><img src="https://live.staticflickr.com/65535/48615261331_0111157b84.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Wear on previous tooling led to this V2 revision and refresh. Details are very different from V1 variants and easiest to spot is the simplified 10 spoke rear wheel. (Model T's have 12) The knife is clearly c. '77 with the 1mm 'full' center spacer, aluminum tweezer tip, and larger scissor screw, etc.</p>
<p dir="auto">c. '79 V2n:</p>
<p dir="auto"><img src="https://live.staticflickr.com/65535/48615411557_4e681f4dd3.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I think the c. '77 tooling must have started to wear by '78 and like some inlays were switched back to Nickel Silver (like Fish and some Vic shields) while some went to Hot Stamp like the Camper.</p>
<p dir="auto">Late '80s:<br />
<img src="https://live.staticflickr.com/65535/48615270496_ef122d4664.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I don't have a c. '80 copy or pictures of one, but I think that's the time that the design was again simplified for longevity with 100% stainless inlay use.  The easiest detail to spot is the lack of button dots in the seats. I have not studied post '80 variants for any differences.</p>
<hr />
<p dir="auto">Thanks for looking!</p>
]]></description><link>https://multitool.ninja/topic/82626/dating-in-the-70s-victorinox-chronology-part-1-grand-prix-inlays</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 14:55:53 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/82626.rss" rel="self" type="application/rss+xml"/><pubDate>Fri, 30 Aug 2019 05:46:37 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Sat, 30 Mar 2024 20:25:00 GMT]]></title><description><![CDATA[<p dir="auto">if they made the Grand Prix in black I would have one. I can't do red SAK's.  Black Cellidor or Sliver Alox for me and I like the Black Oynx stuff but there isn't much of it</p>
]]></description><link>https://multitool.ninja/post/2471562</link><guid isPermaLink="true">https://multitool.ninja/post/2471562</guid><dc:creator><![CDATA[Swisster]]></dc:creator><pubDate>Sat, 30 Mar 2024 20:25:00 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Fri, 29 Mar 2024 11:33:50 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/myron" aria-label="Profile: Myron">@<bdi>Myron</bdi></a> <a href="/post/2471302">said</a>:<br />
Of course.</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2471333</link><guid isPermaLink="true">https://multitool.ninja/post/2471333</guid><dc:creator><![CDATA[Huntsman]]></dc:creator><pubDate>Fri, 29 Mar 2024 11:33:50 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Fri, 29 Mar 2024 08:00:34 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/myron" aria-label="Profile: Myron">@<bdi>Myron</bdi></a> <a href="/post/2471302">said</a>:<br />
I've also seen him recently over on Blade Forums.  I posted some pictures of my vintage 2224 (which we would call a Farmer today), a knife I happened to know the production date of, and he corrected me by a few years.  Of course.</p>
<p dir="auto"><img src="/assets/uploads/smileys/1196453940-SAKgif.gif" alt=":climber:" title=":climber:" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2471330</link><guid isPermaLink="true">https://multitool.ninja/post/2471330</guid><dc:creator><![CDATA[Gio_Luso]]></dc:creator><pubDate>Fri, 29 Mar 2024 08:00:34 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Thu, 28 Mar 2024 23:11:39 GMT]]></title><description><![CDATA[<p dir="auto">I've also seen him recently over on Blade Forums.  I posted some pictures of my vintage 2224 (which we would call a Farmer today), a knife I happened to know the production date of, and he corrected me by a few years.  Of course.</p>
<p dir="auto"><img src="/assets/uploads/smileys/1196453940-SAKgif.gif" alt=":climber:" title=":climber:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2471302</link><guid isPermaLink="true">https://multitool.ninja/post/2471302</guid><dc:creator><![CDATA[Myron]]></dc:creator><pubDate>Thu, 28 Mar 2024 23:11:39 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Tue, 26 Mar 2024 12:00:25 GMT]]></title><description><![CDATA[<p dir="auto">Thank you, I will try to see your blog.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2470963</link><guid isPermaLink="true">https://multitool.ninja/post/2470963</guid><dc:creator><![CDATA[Gio_Luso]]></dc:creator><pubDate>Tue, 26 Mar 2024 12:00:25 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Mon, 25 Mar 2024 23:49:11 GMT]]></title><description><![CDATA[<p dir="auto">Hi</p>
<p dir="auto">Yes - That's a shame indeed</p>
<p dir="auto">I did a quick check and it looks like the images were on the flickr image hosting site</p>
<p dir="auto">Kamakiri is no longer active here at MTo - But he did start up his own blog:<br />
<a href="https://kamakiriknives.com/" rel="nofollow ugc">https://kamakiriknives.com/</a></p>
<p dir="auto">Lots of posts and images there - Maybe the Grand Prix stuff</p>
]]></description><link>https://multitool.ninja/post/2470907</link><guid isPermaLink="true">https://multitool.ninja/post/2470907</guid><dc:creator><![CDATA[Huntsman]]></dc:creator><pubDate>Mon, 25 Mar 2024 23:49:11 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Mon, 25 Mar 2024 17:42:48 GMT]]></title><description><![CDATA[<p dir="auto">How sad that the images from the original post are not visible.  <img src="/assets/uploads/smileys/cry.gif" alt=":cry:" title="Cry" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2470878</link><guid isPermaLink="true">https://multitool.ninja/post/2470878</guid><dc:creator><![CDATA[Gio_Luso]]></dc:creator><pubDate>Mon, 25 Mar 2024 17:42:48 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Mon, 02 Nov 2020 22:37:37 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">Thanks for the kind comments Huntsman!</p>
<p dir="auto">I hope this sort of information helps the community more than it hurts my wallet!  ;)</p>
]]></description><link>https://multitool.ninja/post/2175596</link><guid isPermaLink="true">https://multitool.ninja/post/2175596</guid><dc:creator><![CDATA[kamakiri]]></dc:creator><pubDate>Mon, 02 Nov 2020 22:37:37 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Mon, 02 Nov 2020 21:42:17 GMT]]></title><description><![CDATA[<p dir="auto">Fantastic thread - Love the Grand Prix - Although I only have the one from about '84</p>
<p dir="auto">The level of knowledge and observation - and size of examples in collections - in these types of threads - never ceases to amaze me!!    :o</p>
<p dir="auto">Thread added to the stickied Identification Resources thread in the SAK board</p>
]]></description><link>https://multitool.ninja/post/2175556</link><guid isPermaLink="true">https://multitool.ninja/post/2175556</guid><dc:creator><![CDATA[Huntsman]]></dc:creator><pubDate>Mon, 02 Nov 2020 21:42:17 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Mon, 02 Nov 2020 20:15:48 GMT]]></title><description><![CDATA[<p dir="auto">Minor update- I have also found Grands Prix (also In no-scissor Jr.) with V1n ‘12 spoke’ scales without clip point blades. Still c. ‘73.</p>
<p dir="auto">Also finally continuing this series:<br />
<a href="/post/2175504">Part 2- Catalogs</a></p>
]]></description><link>https://multitool.ninja/post/2175512</link><guid isPermaLink="true">https://multitool.ninja/post/2175512</guid><dc:creator><![CDATA[kamakiri]]></dc:creator><pubDate>Mon, 02 Nov 2020 20:15:48 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Sat, 09 Nov 2019 13:26:14 GMT]]></title><description><![CDATA[<p dir="auto">Very nice example. It is on my short list <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2041421</link><guid isPermaLink="true">https://multitool.ninja/post/2041421</guid><dc:creator><![CDATA[Rapidray]]></dc:creator><pubDate>Sat, 09 Nov 2019 13:26:14 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Sat, 09 Nov 2019 05:25:08 GMT]]></title><description><![CDATA[<p dir="auto">For the V2n example, I probably should have used this example from a c. '78 Grand Prix Jr.:</p>
<p dir="auto"><img src="https://live.staticflickr.com/65535/49036507371_ef53fd81ba.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://live.staticflickr.com/65535/49036507221_cfa0456014.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Misplaced it a while back and couldn't find it when I started this thread.  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /> Found it today when I was reorganizing some stuff and was putting away some other Grands Prix I was using for a challenge.  The other one might be a prettier knife, but this one looks more original and photographs better with the patina.</p>
]]></description><link>https://multitool.ninja/post/2041340</link><guid isPermaLink="true">https://multitool.ninja/post/2041340</guid><dc:creator><![CDATA[kamakiri]]></dc:creator><pubDate>Sat, 09 Nov 2019 05:25:08 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Mon, 23 Sep 2019 20:53:56 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/jazzbass" aria-label="Profile: jazzbass">@<bdi>jazzbass</bdi></a> <a href="/post/2005679">said</a>:<br />
Follow up from my earlier post...</p>
<p dir="auto">Found it! It's a Champion from c. 1976. Look at how bad the bottom of the logo is:</p>
<p dir="auto"><img src="https://i.imgur.com/teAAC4V.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I took a sampling of 8 from across the range of 1982-1996. I used Photoshop to cut out the logo on the first one and overlay on all the others. They all matched up as far as I could tell. The image in the post here is scaled to 1280px wide. <a href="https://i.imgur.com/mCKeENf.jpg" rel="nofollow ugc">Click here for a high res version.</a></p>
<p dir="auto"><img src="https://i.imgur.com/7pNOdH5.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">BTW, one more interesting thing is that as far as I can tell the early SS inlays are a different alloy than the later ones. Early SS logos are not (or are weakly) magnetic while the later ones post 1980 are. Using a fairly weak refrigerator magnet, I can lift the magnet from my hand with the post 1980 inlays, but not with the earlier ones. This would suggest that they used an austenitic alloy (like in flatware) for the first attempt and a martensitic steel (like the steel in their blades) for the second.</p>
</blockquote>
<p dir="auto">Thanks for the follow-up on the post-'80 versions, jazzbass!  Seemed pretty clear to me reviewing photos over the years, but I haven't put any effort into confirming that they are essentially the same.</p>
<p dir="auto">Regarding the magnetic materials, I can confirm that this knife has a magnetic shield and a non-magnetic car inlay c. '76:</p>
<p dir="auto"><img src="https://live.staticflickr.com/65535/48648221281_bb3f096e8f.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Not to get ahead of myself in the series, but I also suspect that the early non-magnetic inlays had different alloys...or at the very least different levels of polish or just different finishes. The earliest copies c. '72/'73 appear quite clearly different to the naked eye when viewed side by side.</p>
<p dir="auto">I am a bit surprised at how bad that c. '76 shield is, but does explain the 'sudden' and broad use of NS shields again in the '77-'79 range.</p>
]]></description><link>https://multitool.ninja/post/2015099</link><guid isPermaLink="true">https://multitool.ninja/post/2015099</guid><dc:creator><![CDATA[kamakiri]]></dc:creator><pubDate>Mon, 23 Sep 2019 20:53:56 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Fri, 06 Sep 2019 19:05:47 GMT]]></title><description><![CDATA[<p dir="auto">Very interesting jazzbass  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /><br />
I haven't yet seen an early SS Vic. inlay like that myself  <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2005693</link><guid isPermaLink="true">https://multitool.ninja/post/2005693</guid><dc:creator><![CDATA[McStitchy]]></dc:creator><pubDate>Fri, 06 Sep 2019 19:05:47 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Fri, 06 Sep 2019 18:54:07 GMT]]></title><description><![CDATA[<p dir="auto">Follow up from my earlier post...</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/jazzbass" aria-label="Profile: jazzbass">@<bdi>jazzbass</bdi></a> <a href="/post/2003622">said</a>:<br />
I've always found it unfortunate that the stamping dies for the stainless steel emblems couldn't reproduce the details that they could for nickel-silver. I mean, they tried, but a lot of the early ss inlays made with ns dies came out looking just terrible. I have a knife from the early 70s first-attempt-at-ss-inlays where the Vic logo itself is all jagged and messy.</p>
</blockquote>
<p dir="auto">Found it! It's a Champion from c. 1976. Look at how bad the bottom of the logo is:</p>
<p dir="auto"><img src="https://i.imgur.com/teAAC4V.jpg" alt="" class="img-markdown  img-fluid" /></p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/jazzbass" aria-label="Profile: jazzbass">@<bdi>jazzbass</bdi></a> <a href="/post/2003622">said</a>:<br />
FWIW I have a bunch (15-20) of the later ss inlays from c. 1980-1996 and a quick look doesn't show any differences. But it was just that - a quick look.</p>
</blockquote>
<p dir="auto">I took a sampling of 8 from across the range of 1982-1996. I used Photoshop to cut out the logo on the first one and overlay on all the others. They all matched up as far as I could tell. The image in the post here is scaled to 1280px wide. <a href="https://i.imgur.com/mCKeENf.jpg" rel="nofollow ugc">Click here for a high res version.</a></p>
<p dir="auto"><img src="https://i.imgur.com/7pNOdH5.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">BTW, one more interesting thing is that as far as I can tell the early SS inlays are a different alloy than the later ones. Early SS logos are not (or are weakly) magnetic while the later ones post 1980 are. Using a fairly weak refrigerator magnet, I can lift the magnet from my hand with the post 1980 inlays, but not with the earlier ones. This would suggest that they used an austenitic alloy (like in flatware) for the first attempt and a martensitic steel (like the steel in their blades) for the second.</p>
]]></description><link>https://multitool.ninja/post/2005679</link><guid isPermaLink="true">https://multitool.ninja/post/2005679</guid><dc:creator><![CDATA[jazzbass]]></dc:creator><pubDate>Fri, 06 Sep 2019 18:54:07 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Tue, 03 Sep 2019 01:56:25 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/kamakiri" aria-label="Profile: kamakiri">@<bdi>kamakiri</bdi></a> <a href="/post/2003596">said</a>:<br />
It's a Model T fer shure.</p>
<p dir="auto"><img src="https://upload.wikimedia.org/wikipedia/commons/thumb/7/74/1910Ford-T.jpg/220px-1910Ford-T.jpg" alt="" class="img-markdown  img-fluid" /><br />
Pic from Model T wiki.</p>
<p dir="auto">Height of the lights, windshield support rods, position of the steering wheel and shape of the rear fender are good clues.</p>
<p dir="auto">....</p>
<p dir="auto">Didn't think this would evolve into a discussion on actual cars, but I'm glad the thread has some interest!  :)</p>
<p dir="auto">Thanks all for the compliments and participation!  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">So it is!   Thanks for clearing this up.  I've always wondered...</p>
]]></description><link>https://multitool.ninja/post/2003695</link><guid isPermaLink="true">https://multitool.ninja/post/2003695</guid><dc:creator><![CDATA[Myron]]></dc:creator><pubDate>Tue, 03 Sep 2019 01:56:25 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Mon, 02 Sep 2019 23:50:59 GMT]]></title><description><![CDATA[<p dir="auto">I've always found it unfortunate that the stamping dies for the stainless steel emblems couldn't reproduce the details that they could for nickel-silver. I mean, they tried, but a lot of the early ss inlays made with ns dies came out looking just terrible. I have a knife from the early 70s first-attempt-at-ss-inlays where the Vic logo itself is all jagged and messy.</p>
<p dir="auto">The older ns inlays - the fish and the Model T especially - just have so much more fine detail in them. The buttons on the T and the fine detailed scales on the fish are just great. Later ss inlays got better (the Battle Series inlays are very nice), but I imagine you can do more detail work when you're producing low volume knives and not main catalog numbers like the Grand Prix and Angler/Fisherman.</p>
<p dir="auto">FWIW I have a bunch (15-20) of the later ss inlays from c. 1980-1996 and a quick look doesn't show any differences. But it was just that - a quick look.</p>
]]></description><link>https://multitool.ninja/post/2003622</link><guid isPermaLink="true">https://multitool.ninja/post/2003622</guid><dc:creator><![CDATA[jazzbass]]></dc:creator><pubDate>Mon, 02 Sep 2019 23:50:59 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Mon, 02 Sep 2019 22:45:19 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/myron" aria-label="Profile: Myron">@<bdi>Myron</bdi></a> <a href="/post/2003337">said</a>:<br />
I could be wrong, but I always thought the Grand Prix inlay was a Packard.  Like this 1910 Tourer.</p>
<p dir="auto">Does anyone know for sure?</p>
<p dir="auto"><img src="https://i.imgur.com/Nq6epIo.jpg" alt="" class="img-markdown  img-fluid" /><br />
(not my picture)</p>
</blockquote>
<p dir="auto">It's a Model T fer shure.</p>
<p dir="auto"><img src="https://upload.wikimedia.org/wikipedia/commons/thumb/7/74/1910Ford-T.jpg/220px-1910Ford-T.jpg" alt="" class="img-markdown  img-fluid" /><br />
Pic from Model T wiki.</p>
<p dir="auto">Height of the lights, windshield support rods, position of the steering wheel and shape of the rear fender are good clues.</p>
<p dir="auto">....</p>
<p dir="auto">Didn't think this would evolve into a discussion on actual cars, but I'm glad the thread has some interest!  :)</p>
<p dir="auto">Thanks all for the compliments and participation!  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2003596</link><guid isPermaLink="true">https://multitool.ninja/post/2003596</guid><dc:creator><![CDATA[kamakiri]]></dc:creator><pubDate>Mon, 02 Sep 2019 22:45:19 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Mon, 02 Sep 2019 14:02:19 GMT]]></title><description><![CDATA[<p dir="auto">I could be wrong, but I always thought the Grand Prix inlay was a Packard.  Like this 1910 Tourer.</p>
<p dir="auto">Does anyone know for sure?</p>
<p dir="auto"><img src="https://i.imgur.com/Nq6epIo.jpg" alt="" class="img-markdown  img-fluid" /><br />
(not my picture)</p>
]]></description><link>https://multitool.ninja/post/2003337</link><guid isPermaLink="true">https://multitool.ninja/post/2003337</guid><dc:creator><![CDATA[Myron]]></dc:creator><pubDate>Mon, 02 Sep 2019 14:02:19 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Sat, 31 Aug 2019 13:16:52 GMT]]></title><description><![CDATA[<p dir="auto">Great read  - I hadn’t realised there were such subtle differences! <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2002062</link><guid isPermaLink="true">https://multitool.ninja/post/2002062</guid><dc:creator><![CDATA[Rizio Il Ghiro]]></dc:creator><pubDate>Sat, 31 Aug 2019 13:16:52 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Sat, 31 Aug 2019 13:14:27 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/koke" aria-label="Profile: koke">@<bdi>koke</bdi></a> <a href="/post/2002050">said</a>:<br />
Great thread... love this model.</p>
<p dir="auto">It isn’t the inlay, but just seen the car today<br />
It’s 1923 and runs smoothly</p>
<p dir="auto"><img src="https://uploads.tapatalk-cdn.com/20190831/baefdc74159c49c65f0bd7444534bc71.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://uploads.tapatalk-cdn.com/20190831/9d4b8fd5d6629fe3c7c54d59dab253bb.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">Thats very nice!  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2002058</link><guid isPermaLink="true">https://multitool.ninja/post/2002058</guid><dc:creator><![CDATA[Rapidray]]></dc:creator><pubDate>Sat, 31 Aug 2019 13:14:27 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Sat, 31 Aug 2019 13:08:33 GMT]]></title><description><![CDATA[<p dir="auto">Great thread... love this model.</p>
<p dir="auto">It isn’t the inlay, but just seen the car today<br />
It’s 1923 and runs smoothly</p>
<p dir="auto"><img src="https://uploads.tapatalk-cdn.com/20190831/baefdc74159c49c65f0bd7444534bc71.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://uploads.tapatalk-cdn.com/20190831/9d4b8fd5d6629fe3c7c54d59dab253bb.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2002050</link><guid isPermaLink="true">https://multitool.ninja/post/2002050</guid><dc:creator><![CDATA[koke]]></dc:creator><pubDate>Sat, 31 Aug 2019 13:08:33 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Sat, 31 Aug 2019 04:30:03 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/kamakiri" aria-label="Profile: kamakiri">@<bdi>kamakiri</bdi></a> <a href="/post/2001828">said</a>:<br />
Thanks &lt;u&gt;everyone&lt;/u&gt; for the interest and participation!  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" />  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">This is the another 'V1s' c. '76 showing more degradation of the die/tooling:<br />
<img src="https://live.staticflickr.com/65535/48648221281_bb3f096e8f.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">And the blank rear tang is definitely indicative of c.'73 to '75 when paired with a black scissor spring.<br />
<img src="https://live.staticflickr.com/65535/48648220316_3e518256db.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://live.staticflickr.com/65535/48647853228_6e0624343a.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I'll certainly cover the topic of blank rear tangs again/more when I circle back for Camping inlay updates in this series.</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2001950</link><guid isPermaLink="true">https://multitool.ninja/post/2001950</guid><dc:creator><![CDATA[Rapidray]]></dc:creator><pubDate>Sat, 31 Aug 2019 04:30:03 GMT</pubDate></item><item><title><![CDATA[Reply to Dating in the '70s - Victorinox chronology - Part 1 - Grand Prix Inlays on Fri, 30 Aug 2019 20:40:51 GMT]]></title><description><![CDATA[<p dir="auto">Thanks &lt;u&gt;everyone&lt;/u&gt; for the interest and participation!  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" />  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">This is the another 'V1s' c. '76 showing more degradation of the die/tooling:<br />
<img src="https://live.staticflickr.com/65535/48648221281_bb3f096e8f.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">And the blank rear tang is definitely indicative of c.'73 to '75 when paired with a black scissor spring.<br />
<img src="https://live.staticflickr.com/65535/48648220316_3e518256db.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://live.staticflickr.com/65535/48647853228_6e0624343a.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I'll certainly cover the topic of blank rear tangs again/more when I circle back for Camping inlay updates in this series.</p>
]]></description><link>https://multitool.ninja/post/2001828</link><guid isPermaLink="true">https://multitool.ninja/post/2001828</guid><dc:creator><![CDATA[kamakiri]]></dc:creator><pubDate>Fri, 30 Aug 2019 20:40:51 GMT</pubDate></item></channel></rss>