<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[MUT with Surge upgrades]]></title><description><![CDATA[<p dir="auto">Hi all, first post here. I got bit by the modding bug after seeing all these wonderful mods and i wanted to give i a try. Here is what i have done to the MUT</p>
<ol>
<li>
<p dir="auto">surge scissors - swapped out the saw blade for the surge scissors.need to work on the locking mech as it is a tad shorter than the surge locking spring. The spring lever needs added width so that it can lock into place when the scissors fully opens up.</p>
</li>
<li>
<p dir="auto">Surge T shank adapter - swapped out the Punch tool for this. Had to dremel a section of the frame out to fit the parts but well worth the effort. saw blade is fully enclosed with in the space and the location of the pocket clip acts as a shield for the fingers when in pliers mode. gotta work on the retention as well and i have a plan for it already, just need to get it to a welding table.</p>
</li>
<li>
<p dir="auto">elongated side bits holder - hey... they gave a short and a long bit... why bother keeping the short one... lol...</p>
</li>
<li>
<p dir="auto">t shank file storage - removed the plastic pieces at the bronze carbon scrapper area and surprisingly the space is just nice for the file that came with the surge. The scrapper acts as a retention device being quite tight to begin with. the file is held by friction and it doesnt move unless u flip out the scrapper. very nice.</p>
</li>
</ol>
<p dir="auto">So i basically turned the MUT into a edc tool for construction/ contractor work. I like the MUT for its looks and its hammer function is applicable to my profession. But being in singapore, having a tool specifically for gun related maintenance is kinda redundant since we dont allow guns here lol. So THIS makes the MUT so much more applicable to my environment lol. loving every sec of it. Will update when i have fully resolved the retention issues and the new parts work like they should.</p>
<p dir="auto">here is the album <a href="https://imgur.com/a/uaLzde2" rel="nofollow ugc">https://imgur.com/a/uaLzde2</a></p>
<p dir="auto">and heres a pic to show the surge DNA lol<br />
<img src="https://i.imgur.com/gr8jEMg.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/topic/82979/mut-with-surge-upgrades</link><generator>RSS for Node</generator><lastBuildDate>Fri, 20 Nov 2026 09:12:17 GMT</lastBuildDate><atom:link href="https://forum.multitool.org/topic/82979.rss" rel="self" type="application/rss+xml"/><pubDate>Sat, 12 Oct 2019 13:45:58 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to MUT with Surge upgrades on Sat, 01 Feb 2020 02:53:25 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/agreesign.gif" alt=":iagree:" title="I agree" class="forum-smiley emoji" /> Some great mods and video!  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/2081321</link><guid isPermaLink="true">https://forum.multitool.org/post/2081321</guid><dc:creator><![CDATA[Rapidray]]></dc:creator><pubDate>Sat, 01 Feb 2020 02:53:25 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Wed, 23 Oct 2019 12:05:06 GMT]]></title><description><![CDATA[<p dir="auto">Welcome to the forum and great job on the mods !    <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/2033189</link><guid isPermaLink="true">https://forum.multitool.org/post/2033189</guid><dc:creator><![CDATA[SteveC]]></dc:creator><pubDate>Wed, 23 Oct 2019 12:05:06 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Wed, 23 Oct 2019 10:48:55 GMT]]></title><description><![CDATA[<p dir="auto">Welcome to <img src="/assets/uploads/smileys/image-006C_4EFF802C.gif" alt=":MTO:" title="Multitool Sign" class="forum-smiley emoji" /> x-iled <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> Some very awesome mods 8) Thanks for sharing and that weld on those scissors looks crazy good :o <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/2033113</link><guid isPermaLink="true">https://forum.multitool.org/post/2033113</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Wed, 23 Oct 2019 10:48:55 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Fri, 18 Oct 2019 11:21:45 GMT]]></title><description><![CDATA[<p dir="auto">Nice job again looks great  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/2030372</link><guid isPermaLink="true">https://forum.multitool.org/post/2030372</guid><dc:creator><![CDATA[Wspeed]]></dc:creator><pubDate>Fri, 18 Oct 2019 11:21:45 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Fri, 18 Oct 2019 05:20:59 GMT]]></title><description><![CDATA[<p dir="auto">yes its me again.. lol.. i tell ya, ive been bit hard by the mod bug... heres another one fresh from the welding table... i got inspired by diresta's whichblade 2 and i made a ratchet attachement to be fitted to the MUT hammer. still need to clean it up and pretty it up properly but this works. and also.. i need to think of a way to lock the attachment in.. currently its only friction ffitted.</p>
<p dir="auto"><img src="https://i.imgur.com/a0gFrvk.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.imgur.com/qefF2UU.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.imgur.com/QVbgsT2.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.imgur.com/hdUf8kC.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">and heres a vid of it being deployed lol</p>
<p dir="auto"><a href="https://www.instagram.com/p/B3vwSklldZ0/?igshid=xrtof3uwl12h" rel="nofollow ugc">https://www.instagram.com/p/B3vwSklldZ0/?igshid=xrtof3uwl12h</a></p>
]]></description><link>https://forum.multitool.org/post/2030312</link><guid isPermaLink="true">https://forum.multitool.org/post/2030312</guid><dc:creator><![CDATA[x-iled]]></dc:creator><pubDate>Fri, 18 Oct 2019 05:20:59 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Thu, 17 Oct 2019 13:26:05 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/agreesign.gif" alt=":iagree:" title="I agree" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/2029955</link><guid isPermaLink="true">https://forum.multitool.org/post/2029955</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Thu, 17 Oct 2019 13:26:05 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Thu, 17 Oct 2019 13:06:02 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/x-iled" aria-label="Profile: x-iled">@<bdi>x-iled</bdi></a> <a href="/post/2029406">said</a>:<br />
Nah that's alright lol.. ultimately modders are the ones finding out what fits and what doesn't hahaha.. all for the progress of the community!</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> do stay around. Not many people around from your part of the world. Can't wait to see what other projects you have in mind.   <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/2029951</link><guid isPermaLink="true">https://forum.multitool.org/post/2029951</guid><dc:creator><![CDATA[Sam Lim]]></dc:creator><pubDate>Thu, 17 Oct 2019 13:06:02 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Wed, 16 Oct 2019 14:09:32 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />.</p>
]]></description><link>https://forum.multitool.org/post/2029418</link><guid isPermaLink="true">https://forum.multitool.org/post/2029418</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Wed, 16 Oct 2019 14:09:32 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Wed, 16 Oct 2019 14:06:07 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/aloha" aria-label="Profile: Aloha">@<bdi>Aloha</bdi></a> <a href="/post/2029396">said</a>:<br />
Clean job on the welding.  The Vic scissors are great as are the Surge scissors.  Did I miss why you didn't try them?</p>
<p dir="auto">This is really nice mod on the MUT  <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Oh I only had a surge previously and was trying to make the most of it. When I realised I had plans for where I initially put the scissors, I had to change out the location and the surge scissors spring mech can be quite a hassle to make it work on a pin that doesn't have the locking spring. Lol.. so i went and bought a victorinox outrider to transplant its scissors lol</p>
]]></description><link>https://forum.multitool.org/post/2029410</link><guid isPermaLink="true">https://forum.multitool.org/post/2029410</guid><dc:creator><![CDATA[x-iled]]></dc:creator><pubDate>Wed, 16 Oct 2019 14:06:07 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Wed, 16 Oct 2019 14:03:37 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Sam Lim <a href="/post/2029380">said</a>:<br />
Oh.. Could be my bad. Could be on the other end on the punch side... Really nice work on the welding boss.</p>
</blockquote>
<p dir="auto">Nah that's alright lol.. ultimately modders are the ones finding out what fits and what doesn't hahaha.. all for the progress of the community!</p>
]]></description><link>https://forum.multitool.org/post/2029406</link><guid isPermaLink="true">https://forum.multitool.org/post/2029406</guid><dc:creator><![CDATA[x-iled]]></dc:creator><pubDate>Wed, 16 Oct 2019 14:03:37 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Wed, 16 Oct 2019 13:50:47 GMT]]></title><description><![CDATA[<p dir="auto">Clean job on the welding.  The Vic scissors are great as are the Surge scissors.  Did I miss why you didn't try them?</p>
<p dir="auto">This is really nice mod on the MUT  <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/2029396</link><guid isPermaLink="true">https://forum.multitool.org/post/2029396</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Wed, 16 Oct 2019 13:50:47 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Wed, 16 Oct 2019 13:33:09 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/x-iled" aria-label="Profile: x-iled">@<bdi>x-iled</bdi></a> <a href="/post/2029301">said</a>:<br />
I dont think it can be done for the MUT scrapper side pin. That hole required is 7mm..something thats different on the MUT. I think the pin only slides in from the scrapper side cuz the other end is the smaller 5.5mm pin.</p>
<p dir="auto">if I were to bore out the vic scissors I'll be dangerously close to the edge..</p>
</blockquote>
<p dir="auto">Oh.. Could be my bad. Could be on the other end on the punch side... Really nice work on the welding boss.</p>
]]></description><link>https://forum.multitool.org/post/2029380</link><guid isPermaLink="true">https://forum.multitool.org/post/2029380</guid><dc:creator><![CDATA[Sam Lim]]></dc:creator><pubDate>Wed, 16 Oct 2019 13:33:09 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Wed, 16 Oct 2019 11:59:52 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Sam Lim <a href="/post/2029275">said</a>:<br />
If u drilled out the pivot hole on the Vic scissors, it will also fit there.</p>
<p dir="auto"><img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> I think this is the first time someone did a proper pivot for a Vic scissors to be fitted on a LM.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I dont think it can be done for the MUT scrapper side pin. That hole required is 7mm..something thats different on the MUT. I think the pin only slides in from the scrapper side cuz the other end is the smaller 5.5mm pin.</p>
<p dir="auto">if I were to bore out the vic scissors I'll be dangerously close to the edge..</p>
]]></description><link>https://forum.multitool.org/post/2029301</link><guid isPermaLink="true">https://forum.multitool.org/post/2029301</guid><dc:creator><![CDATA[x-iled]]></dc:creator><pubDate>Wed, 16 Oct 2019 11:59:52 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Wed, 16 Oct 2019 11:22:57 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/x-iled" aria-label="Profile: x-iled">@<bdi>x-iled</bdi></a> <a href="/post/2029254">said</a>:<br />
decided to swap out the surge scissors for a victorinox one. but i put it at the bronze scrapper location as i have some plans for the current scissors location. Got a stainless steel spacer cut to shape and then had it lazer welded... damn pretty welds by the welder.. extremely happy with how this turned out.</p>
<p dir="auto"><img src="https://i.imgur.com/d8ItSbR.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.imgur.com/7yL5qTx.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.imgur.com/FBesQkY.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.imgur.com/9z8S5FV.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">If u drilled out the pivot hole on the Vic scissors, it will also fit there.</p>
<p dir="auto"><img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> I think this is the first time someone did a proper pivot for a Vic scissors to be fitted on a LM.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/2029275</link><guid isPermaLink="true">https://forum.multitool.org/post/2029275</guid><dc:creator><![CDATA[Sam Lim]]></dc:creator><pubDate>Wed, 16 Oct 2019 11:22:57 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Wed, 16 Oct 2019 11:19:29 GMT]]></title><description><![CDATA[<p dir="auto">That looks really good especially the welding  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/2029272</link><guid isPermaLink="true">https://forum.multitool.org/post/2029272</guid><dc:creator><![CDATA[Wspeed]]></dc:creator><pubDate>Wed, 16 Oct 2019 11:19:29 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Wed, 16 Oct 2019 09:34:36 GMT]]></title><description><![CDATA[<p dir="auto">decided to swap out the surge scissors for a victorinox one. but i put it at the bronze scrapper location as i have some plans for the current scissors location. Got a stainless steel spacer cut to shape and then had it lazer welded... damn pretty welds by the welder.. extremely happy with how this turned out.</p>
<p dir="auto"><img src="https://i.imgur.com/d8ItSbR.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.imgur.com/7yL5qTx.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.imgur.com/FBesQkY.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.imgur.com/9z8S5FV.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/post/2029254</link><guid isPermaLink="true">https://forum.multitool.org/post/2029254</guid><dc:creator><![CDATA[x-iled]]></dc:creator><pubDate>Wed, 16 Oct 2019 09:34:36 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Mon, 14 Oct 2019 18:13:36 GMT]]></title><description><![CDATA[<p dir="auto">Nice job  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/2028402</link><guid isPermaLink="true">https://forum.multitool.org/post/2028402</guid><dc:creator><![CDATA[Wspeed]]></dc:creator><pubDate>Mon, 14 Oct 2019 18:13:36 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Mon, 14 Oct 2019 17:35:44 GMT]]></title><description><![CDATA[<p dir="auto">added a victorinox tweezers! because i had previously filed down the bit storage plastic piece to  house the longer bit, it was too thin in my opinion to safely carve out the tunnel for the tweezers. I cut up the existing side plastic piece for the pin pusher and made it fit like a stopper for the longer bit. This doubles up as extra thickness for the tunnel carving lol.</p>
<p dir="auto"><img src="https://i.imgur.com/uz8LXLy.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.imgur.com/rOljw8J.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">and added grip tape to the t shank. huge improvement in thumb flip lol.</p>
<p dir="auto"><img src="https://i.imgur.com/S0XLGqw.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://forum.multitool.org/post/2028382</link><guid isPermaLink="true">https://forum.multitool.org/post/2028382</guid><dc:creator><![CDATA[x-iled]]></dc:creator><pubDate>Mon, 14 Oct 2019 17:35:44 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Sun, 13 Oct 2019 13:10:15 GMT]]></title><description><![CDATA[<p dir="auto">I have reached 60K posts so I am no<br />
longer nuts I am now just bananas  :D</p>
]]></description><link>https://forum.multitool.org/post/2027541</link><guid isPermaLink="true">https://forum.multitool.org/post/2027541</guid><dc:creator><![CDATA[Wspeed]]></dc:creator><pubDate>Sun, 13 Oct 2019 13:10:15 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Sun, 13 Oct 2019 12:42:20 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
<p dir="auto">Why do our good friend Wspeed have so many bananas?</p>
]]></description><link>https://forum.multitool.org/post/2027530</link><guid isPermaLink="true">https://forum.multitool.org/post/2027530</guid><dc:creator><![CDATA[Sam Lim]]></dc:creator><pubDate>Sun, 13 Oct 2019 12:42:20 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Sun, 13 Oct 2019 11:42:58 GMT]]></title><description><![CDATA[<p dir="auto">Thanks for showing it off x-iled  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/2027485</link><guid isPermaLink="true">https://forum.multitool.org/post/2027485</guid><dc:creator><![CDATA[Wspeed]]></dc:creator><pubDate>Sun, 13 Oct 2019 11:42:58 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Sun, 13 Oct 2019 00:00:39 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/wspeed" aria-label="Profile: Wspeed">@<bdi>Wspeed</bdi></a> <a href="/post/2026890">said</a>:<br />
Welcome to  <img src="/assets/uploads/smileys/image-006C_4EFF802C.gif" alt=":MTO:" title="Multitool Sign" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /><br />
Excellent work on the MUT <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/aloha" aria-label="Profile: Aloha">@<bdi>Aloha</bdi></a> <a href="/post/2026856">said</a>:<br />
What an entrance  <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" />.  Welcome to MTO.  Love the MUT too and yours even more.  Well done, very well done  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Hey! Thanks for the compliments dudes! First time modding a leatherman, so when everything fits in with minor modification, u can imagine how stoked I was lol. Just couldn't contain the urge to "showoff" hahahha.</p>
]]></description><link>https://forum.multitool.org/post/2027275</link><guid isPermaLink="true">https://forum.multitool.org/post/2027275</guid><dc:creator><![CDATA[x-iled]]></dc:creator><pubDate>Sun, 13 Oct 2019 00:00:39 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Sat, 12 Oct 2019 14:46:47 GMT]]></title><description><![CDATA[<p dir="auto">Welcome to  <img src="/assets/uploads/smileys/image-006C_4EFF802C.gif" alt=":MTO:" title="Multitool Sign" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /><br />
Excellent work on the MUT <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/2026890</link><guid isPermaLink="true">https://forum.multitool.org/post/2026890</guid><dc:creator><![CDATA[Wspeed]]></dc:creator><pubDate>Sat, 12 Oct 2019 14:46:47 GMT</pubDate></item><item><title><![CDATA[Reply to MUT with Surge upgrades on Sat, 12 Oct 2019 13:50:52 GMT]]></title><description><![CDATA[<p dir="auto">What an entrance  <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" />.  Welcome to MTO.  Love the MUT too and yours even more.  Well done, very well done  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://forum.multitool.org/post/2026856</link><guid isPermaLink="true">https://forum.multitool.org/post/2026856</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Sat, 12 Oct 2019 13:50:52 GMT</pubDate></item></channel></rss>