<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[3D Printer Blog]]></title><description><![CDATA[<p dir="auto">I am thinking of getting into 3D printing. Part of the push is that I can 3D print parts for my Thermaltake P3 case. I thought that was ultra cool...but I do not have anyway of doing this at home.</p>
<p dir="auto">So i have done a little bit of research and am thinking of possibly getting into 3D printing.</p>
<p dir="auto">I was at first attracted to the Photon type printers...but have read that dealing with the liquid resin is a horror show, not to mention the health aspects of the resin itself. I also read the post process cleaning is a real bear requiring rubbing alcohol. I was attracted at the quality, but the print size appears to be very small in the lower end printers. I do not want to spend a fortune on this. i am still unsure how often I would use one.</p>
<p dir="auto">This leads to the filament type printers. Does anyone have any experience that they could pass down to me? Which printer is ok...I am thinking a fairly low budget model would be good for starters. So I have started to look a little on <a href="http://Amazon.ca" rel="nofollow ugc">Amazon.ca</a>.</p>
<p dir="auto">This one is cheap...a Labists X1</p>
<p dir="auto"></p><div class="card col-md-9 col-lg-6 position-relative link-preview p-0">

<div class="card-body">
<h5 class="card-title">
<a class="text-decoration-none" href="https://www.amazon.ca/LABISTS-Entry-Level-Precision-Education-Preloaded/dp/B082KZWYR3/ref=sr_1_7?keywords=3d+Printers&amp;qid=1587145110&amp;sr=8-7">
Amazon.ca
</a>
</h5>
<p class="card-text line-clamp-3"></p>
</div>
<a href="https://www.amazon.ca/LABISTS-Entry-Level-Precision-Education-Preloaded/dp/B082KZWYR3/ref=sr_1_7?keywords=3d+Printers&amp;qid=1587145110&amp;sr=8-7" class="card-footer text-body-secondary small d-flex gap-2 align-items-center lh-2">



<img src="https://www.amazon.ca/favicon.ico" alt="favicon" class="not-responsive overflow-hiddden" style="max-width:21px;max-height:21px" />



<p class="d-inline-block text-truncate mb-0"> <span class="text-secondary">(www.amazon.ca)</span></p>
</a>
</div><p></p>
<p dir="auto">I also like this one, a JGAurora A3S</p>
<p dir="auto"></p><div class="card col-md-9 col-lg-6 position-relative link-preview p-0">

<div class="card-body">
<h5 class="card-title">
<a class="text-decoration-none" href="https://www.amazon.ca/JGAURORA-Assemble-Filament-Detection-Platform/dp/B078JQZLS4/ref=sr_1_2?keywords=jgaurora&amp;qid=1587145440&amp;sr=8-2">
Amazon.ca
</a>
</h5>
<p class="card-text line-clamp-3"></p>
</div>
<a href="https://www.amazon.ca/JGAURORA-Assemble-Filament-Detection-Platform/dp/B078JQZLS4/ref=sr_1_2?keywords=jgaurora&amp;qid=1587145440&amp;sr=8-2" class="card-footer text-body-secondary small d-flex gap-2 align-items-center lh-2">



<img src="https://www.amazon.ca/favicon.ico" alt="favicon" class="not-responsive overflow-hiddden" style="max-width:21px;max-height:21px" />



<p class="d-inline-block text-truncate mb-0"> <span class="text-secondary">(www.amazon.ca)</span></p>
</a>
</div><p></p>
<p dir="auto">I am a bit more attracted to the second because it is priced in my budget and is a bit larger print size...both are orange. I like the industrial look of both.</p>
<p dir="auto">Any suggestions, tips, knowledge, etc I am going to research the hell out of this before I move any further.</p>
]]></description><link>https://multitool.ninja/topic/84437/3d-printer-blog</link><generator>RSS for Node</generator><lastBuildDate>Wed, 18 Nov 2026 16:35:19 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/84437.rss" rel="self" type="application/rss+xml"/><pubDate>Fri, 17 Apr 2020 17:49:32 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to 3D Printer Blog on Mon, 22 May 2023 21:52:56 GMT]]></title><description><![CDATA[<p dir="auto">Sorry about that. I guess the last time I was on this site was in the wanning days of 2022. I see the last response was on March 5th. I take it you have figured out the issue?</p>
]]></description><link>https://multitool.ninja/post/2418014</link><guid isPermaLink="true">https://multitool.ninja/post/2418014</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Mon, 22 May 2023 21:52:56 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Sun, 05 Mar 2023 20:18:10 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/madplumbarian" aria-label="Profile: MadPlumbarian">@<bdi>MadPlumbarian</bdi></a> <a href="/post/2403628">said</a>:<br />
idk, would the base be to hot,</p>
</blockquote>
<p dir="auto">If the base is too hot you'd likely see it at the bottom of the print as melting or deformation.</p>
<p dir="auto">What I meant was the extrusion temperature - that one has to be hot enough to melt and weld to previous laid plastic, but not so hot that it looses shape or runs out too much. There is likely some information included with the material as a starting point. Then it is down to the precision of your printer what temperature you actually have. With a heated bed and no housing you might also experience than high models get colder as you move away from the platform.</p>
<p dir="auto">Then there is extrusion speed - how quickly is that thing spewing out melted plastic? If it puts down more than necessary for the actual print the excess will go somewhere and likely not look pretty.</p>
<p dir="auto">I can add layer heights too - for each layer the printer will lift a bit. Too much and there will be a lack of connection and weld to the previous layer. Too low and the model will be compressed in height and with too much plastic in the walls. That one is fairly easy to calibrate though as you'll know the height of the model and can adjust height and layers according to the welding.</p>
]]></description><link>https://multitool.ninja/post/2403668</link><guid isPermaLink="true">https://multitool.ninja/post/2403668</guid><dc:creator><![CDATA[Vidar]]></dc:creator><pubDate>Sun, 05 Mar 2023 20:18:10 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Sun, 05 Mar 2023 17:26:09 GMT]]></title><description><![CDATA[<p dir="auto">I have no clue, it also doesn’t help that everything is also in metric, I mean so is the printer but I’m still sitting here <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> idk, would the base be to hot, but that’s what it said to be left at, yet the printer says to like triple it? The same with the white stuff, that came with the printer vs, the huge spool the kid also bough, so I’m sure both are going to be diff, but <img src="/assets/uploads/smileys/shrugging.gif" alt=":dunno:" title="I dunno" class="forum-smiley emoji" /> idk? I’m a plumber, when it comes plastic, I use a primer and glue to make it stick so it won’t leak.. that and the glue smells good, <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /><br />
JR</p>
]]></description><link>https://multitool.ninja/post/2403628</link><guid isPermaLink="true">https://multitool.ninja/post/2403628</guid><dc:creator><![CDATA[MadPlumbarian]]></dc:creator><pubDate>Sun, 05 Mar 2023 17:26:09 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Sun, 05 Mar 2023 16:48:52 GMT]]></title><description><![CDATA[<p dir="auto">Been some time since I used filament printers, but that looks like too hot and or too much extrusion.</p>
<p dir="auto">Depending on the material the temperature window might be narrow.</p>
]]></description><link>https://multitool.ninja/post/2403623</link><guid isPermaLink="true">https://multitool.ninja/post/2403623</guid><dc:creator><![CDATA[Vidar]]></dc:creator><pubDate>Sun, 05 Mar 2023 16:48:52 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Sun, 05 Mar 2023 15:28:58 GMT]]></title><description><![CDATA[<p dir="auto">Dad just needs less stress!<br />
JR</p>
]]></description><link>https://multitool.ninja/post/2403610</link><guid isPermaLink="true">https://multitool.ninja/post/2403610</guid><dc:creator><![CDATA[MadPlumbarian]]></dc:creator><pubDate>Sun, 05 Mar 2023 15:28:58 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Sun, 05 Mar 2023 15:10:26 GMT]]></title><description><![CDATA[<p dir="auto">:D<br />
Can ask if he's looking at how to troubleshoot <img src="/assets/uploads/smileys/poke.gif" alt=":poke:" title="poke" class="forum-smiley emoji" /><br />
Dad needs his printer up and running!</p>
]]></description><link>https://multitool.ninja/post/2403609</link><guid isPermaLink="true">https://multitool.ninja/post/2403609</guid><dc:creator><![CDATA[Don Pablo]]></dc:creator><pubDate>Sun, 05 Mar 2023 15:10:26 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Sun, 05 Mar 2023 15:05:28 GMT]]></title><description><![CDATA[<p dir="auto">Come on, your talking to a soon to be 44yr(in 3days) old plumber, the kid is basically doing everything..<br />
JR</p>
]]></description><link>https://multitool.ninja/post/2403608</link><guid isPermaLink="true">https://multitool.ninja/post/2403608</guid><dc:creator><![CDATA[MadPlumbarian]]></dc:creator><pubDate>Sun, 05 Mar 2023 15:05:28 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Sun, 05 Mar 2023 14:53:55 GMT]]></title><description><![CDATA[<p dir="auto">It can require a bunch of tuning for sure.... :ahhh<br />
Know where to find guides?</p>
]]></description><link>https://multitool.ninja/post/2403607</link><guid isPermaLink="true">https://multitool.ninja/post/2403607</guid><dc:creator><![CDATA[Don Pablo]]></dc:creator><pubDate>Sun, 05 Mar 2023 14:53:55 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Sun, 05 Mar 2023 13:52:15 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Don Pablo <a href="/post/2403583">said</a>:<br />
<img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /><br />
Where news?</p>
</blockquote>
<p dir="auto">Still sitting in the dinning room, I built it, the kid was thrilled, so he then tried like three times to print something and well it didn’t print! The first time it kept moving around on the platform, then it stayed put but then half way started again, yet, as we tried again it didn’t exist,  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> so he looked it up and the file for the printer disappeared, he unplugged it and turned it back on, nothing, so he found another file loaded it, and yet it wasn’t for a #3 so he had to unload it, and redo it, go fig, then the next day he had work, so it’s like every time he had a chance something went wrong like the other day well week, we lost our internet connection for a whole 6days, go fig, but here’s a pic, it’s not like we didn’t attempt something,, it’s suppose to be one of those boat thingies but with a skull on the front, the capt behind the wheel on his butt, and another coming up out of the hatch on the back flopped over if you can see them..<br />
JR</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/550405_268733A3-1ACB-46BB-A0A0-34822B1B2EF3.jpg" alt="268733A3-1ACB-46BB-A0A0-34822B1B2EF3.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/550406_CB5AD510-9A18-4B3C-878F-3EE0E9660282.jpg" alt="CB5AD510-9A18-4B3C-878F-3EE0E9660282.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2403599</link><guid isPermaLink="true">https://multitool.ninja/post/2403599</guid><dc:creator><![CDATA[MadPlumbarian]]></dc:creator><pubDate>Sun, 05 Mar 2023 13:52:15 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Sun, 05 Mar 2023 09:53:05 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /><br />
Where news?</p>
]]></description><link>https://multitool.ninja/post/2403583</link><guid isPermaLink="true">https://multitool.ninja/post/2403583</guid><dc:creator><![CDATA[Don Pablo]]></dc:creator><pubDate>Sun, 05 Mar 2023 09:53:05 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Sun, 01 Jan 2023 14:32:19 GMT]]></title><description><![CDATA[<p dir="auto">So, can we expect new SAK scales, with different colours and designs?</p>
<p dir="auto"><img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2389623</link><guid isPermaLink="true">https://multitool.ninja/post/2389623</guid><dc:creator><![CDATA[pfrsantos]]></dc:creator><pubDate>Sun, 01 Jan 2023 14:32:19 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Mon, 26 Dec 2022 15:50:41 GMT]]></title><description><![CDATA[<p dir="auto">I got it, an arched bridge lamp! I built one way back in the day out of a pair of two flat curtain rods that I calculated the length id need to fit the arch to be and then bent them, a simple $2, and then riveted like three pieces of plastic to hold the pair together, then bought a led strip light kit, I think I went out on this one maybe $10, put them together and ended up with the best cheap lamp I ever had, I still have it on my desk but the curtain part has seen better days and it really doesn’t stand up, and the leds are starting to fall off in some areas, but if I built a arched bridge lamp and then used the leds and glued them, this thing wouldn’t go anywhere! I love the lamp cause no mater how you’re working, you can put one hand over the other and you still don’t have shadows, it’s freaking awesome!<br />
JR</p>
<p dir="auto">Here’s a pic of my junk one when I first built it,</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/547266_208B3E63-0385-46ED-8B82-8421918F0556.jpg" alt="208B3E63-0385-46ED-8B82-8421918F0556.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2388433</link><guid isPermaLink="true">https://multitool.ninja/post/2388433</guid><dc:creator><![CDATA[MadPlumbarian]]></dc:creator><pubDate>Mon, 26 Dec 2022 15:50:41 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Mon, 26 Dec 2022 14:32:48 GMT]]></title><description><![CDATA[<p dir="auto">Ok, there’s a few thing I can go with, even the Mrs and kid would find funny..<br />
JR</p>
]]></description><link>https://multitool.ninja/post/2388403</link><guid isPermaLink="true">https://multitool.ninja/post/2388403</guid><dc:creator><![CDATA[MadPlumbarian]]></dc:creator><pubDate>Mon, 26 Dec 2022 14:32:48 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Mon, 26 Dec 2022 12:36:41 GMT]]></title><description><![CDATA[<p dir="auto">Watch a few good build videos and pause it as you built your printer. I did that with the aid of a tablet. It didn't take very long, and the whole procedure is fairly simple once you go through it step by step.</p>
<p dir="auto">I wouldn't worry about any upgrades for now. That will come later. However, if you ever wonder what you can print...take a look over at <a href="https://www.thingiverse.com/" rel="nofollow ugc">https://www.thingiverse.com/</a></p>
<p dir="auto">Search Multi Tool and see just what is available on there for that.</p>
]]></description><link>https://multitool.ninja/post/2388391</link><guid isPermaLink="true">https://multitool.ninja/post/2388391</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Mon, 26 Dec 2022 12:36:41 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Mon, 26 Dec 2022 04:39:09 GMT]]></title><description><![CDATA[<p dir="auto">Thanks, I just spent 25min watching an assembly video and another 20min quickly going through this post from the beginning, I’m still stumped, I have no clue what I’m going to print once I get this thing built, well besides another mini model tool, maybe something to hold displayed sak’s, didn’t someone on here come up with something unique? Something for diff layered sizes? Idk I won’t be at this for a while, I never have time..<br />
Here’s the tool that I got made some time ago, but I think it’s just too big so I want the same thing but in a smaller scale maybe in two diff smaller sizes, like half and also 1/3 or 1/4, I guess we’ll see..<br />
JR</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/547252_12909678-7037-4137-91AB-65E58167BE91.jpg" alt="12909678-7037-4137-91AB-65E58167BE91.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2388375</link><guid isPermaLink="true">https://multitool.ninja/post/2388375</guid><dc:creator><![CDATA[MadPlumbarian]]></dc:creator><pubDate>Mon, 26 Dec 2022 04:39:09 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Mon, 26 Dec 2022 03:05:09 GMT]]></title><description><![CDATA[<p dir="auto">Congratulations on getting one. Once you get it built, I think you will have a lot of fun with it. Just be sure to watch the videos from the start of this thread, and if you read all of this, you should get a nice feel on what you can do with it, and more importantly, how to upgrade it as you get better with your Ender 3.</p>
]]></description><link>https://multitool.ninja/post/2388361</link><guid isPermaLink="true">https://multitool.ninja/post/2388361</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Mon, 26 Dec 2022 03:05:09 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Mon, 26 Dec 2022 02:04:34 GMT]]></title><description><![CDATA[<p dir="auto">I guess I’ll bump this page, our son bought me a Ender 3, 3D printer for Xmas and I don’t have the slightest clue how these things work? Supposedly I’m going to be spending a few hours putting this thing together before I get to the next step but I have no clue as to what that is,,<br />
JR</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/547249_EE2FE67E-FD86-4888-9A89-9008523AF1E5.jpg" alt="EE2FE67E-FD86-4888-9A89-9008523AF1E5.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2388347</link><guid isPermaLink="true">https://multitool.ninja/post/2388347</guid><dc:creator><![CDATA[MadPlumbarian]]></dc:creator><pubDate>Mon, 26 Dec 2022 02:04:34 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Mon, 31 May 2021 14:18:58 GMT]]></title><description><![CDATA[<p dir="auto">That looks good.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2249966</link><guid isPermaLink="true">https://multitool.ninja/post/2249966</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Mon, 31 May 2021 14:18:58 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Mon, 31 May 2021 14:17:08 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/pfrsantos" aria-label="Profile: pfrsantos">@<bdi>pfrsantos</bdi></a> <a href="/post/2249957">said</a>:<br />
Just try not to pablo it...</p>
<p dir="auto"><img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I haven't shown the prints that went smurfed up and were binned on the first layer. <img src="/assets/uploads/smileys/nosee.gif" alt=":dwts:" title="dont want to see" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2249965</link><guid isPermaLink="true">https://multitool.ninja/post/2249965</guid><dc:creator><![CDATA[Don Pablo]]></dc:creator><pubDate>Mon, 31 May 2021 14:17:08 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Mon, 31 May 2021 14:00:14 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Don Pablo <a href="/post/2249923">said</a>:<br />
Thanks for the heads-up. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /><br />
I'll do it once my proper 1kg spool of PLA arrives in the post.</p>
<p dir="auto">This is what I've printed so far with the starter filament (excluding all the test bed-leveling prints  ::) ).</p>
<p dir="auto"><img src="https://forum.multitool.org/index.php?action=dlattach;topic=84437.0;attach=512906.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The 20mm calibration cube is 20.00mm ±0.02mm in the X and Y dimensions according to my micrometer.  :o<br />
On the other hand, the Z dimension (height) is 19.93mm ±0.02mm.  :P<br />
I see a tiny bulge in the bottom edges of the cube, I suspect that the nozzle is ever so slightly too close to the bed for the first layer. :ahhh<br />
But if I try to adjust it to be better, I bet I'll manage to mess it up. <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /><br />
0.07mm too short doesn't sound too bad anyway.</p>
</blockquote>
<p dir="auto">Nice start! I like the boat!</p>
<ol start="8">
<li>
<ol start="8">
<li></li>
</ol>
</li>
</ol>
<p dir="auto">Just try not to pablo it...</p>
<p dir="auto"><img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2249957</link><guid isPermaLink="true">https://multitool.ninja/post/2249957</guid><dc:creator><![CDATA[pfrsantos]]></dc:creator><pubDate>Mon, 31 May 2021 14:00:14 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Mon, 31 May 2021 12:44:47 GMT]]></title><description><![CDATA[<p dir="auto">Thanks for the heads-up. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /><br />
I'll do it once my proper 1kg spool of PLA arrives in the post.</p>
<p dir="auto">This is what I've printed so far with the starter filament (excluding all the test bed-leveling prints  ::) ).</p>
<p dir="auto"><img src="https://forum.multitool.org/index.php?action=dlattach;topic=84437.0;attach=512906.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The 20mm calibration cube is 20.00mm ±0.02mm in the X and Y dimensions according to my micrometer.  :o<br />
On the other hand, the Z dimension (height) is 19.93mm ±0.02mm.  :P<br />
I see a tiny bulge in the bottom edges of the cube, I suspect that the nozzle is ever so slightly too close to the bed for the first layer. :ahhh<br />
But if I try to adjust it to be better, I bet I'll manage to mess it up. <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /><br />
0.07mm too short doesn't sound too bad anyway.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512906_IMG_31052021_133726_(1920_x_1440_pixel).jpg" alt="IMG_31052021_133726_(1920_x_1440_pixel).jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2249923</link><guid isPermaLink="true">https://multitool.ninja/post/2249923</guid><dc:creator><![CDATA[Don Pablo]]></dc:creator><pubDate>Mon, 31 May 2021 12:44:47 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Mon, 31 May 2021 10:47:42 GMT]]></title><description><![CDATA[<p dir="auto">Make sure to do the extruder calibration as well.  <a href="https://all3dp.com/2/ender-3-calibration-how-to-calibrate-your-ender-3/" rel="nofollow ugc">https://all3dp.com/2/ender-3-calibration-how-to-calibrate-your-ender-3/</a></p>
]]></description><link>https://multitool.ninja/post/2249903</link><guid isPermaLink="true">https://multitool.ninja/post/2249903</guid><dc:creator><![CDATA[derekmac]]></dc:creator><pubDate>Mon, 31 May 2021 10:47:42 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Sun, 30 May 2021 16:44:38 GMT]]></title><description><![CDATA[<p dir="auto">I have never printed one, but yes.</p>
]]></description><link>https://multitool.ninja/post/2249698</link><guid isPermaLink="true">https://multitool.ninja/post/2249698</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Sun, 30 May 2021 16:44:38 GMT</pubDate></item><item><title><![CDATA[Reply to 3D Printer Blog on Sun, 30 May 2021 12:16:46 GMT]]></title><description><![CDATA[<p dir="auto">I got a glass bed with the printer. :) That's why I needed the glue stick, I guess.</p>
<p dir="auto">So I went and cycled to a shop, now I have some glue sticks. <img src="/assets/uploads/smileys/woohoo.gif" alt=":woohoo:" title="Woohoo" class="forum-smiley emoji" /><br />
Printing a Benchy now! This is supposed to expose problems with the printer settings, right?<br />
<img src="https://forum.multitool.org/index.php?action=dlattach;topic=84437.0;attach=512807" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/512807_IMG_30052021_130950_(1500_x_1125_pixel).jpg" alt="IMG_30052021_130950_(1500_x_1125_pixel).jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2249541</link><guid isPermaLink="true">https://multitool.ninja/post/2249541</guid><dc:creator><![CDATA[Don Pablo]]></dc:creator><pubDate>Sun, 30 May 2021 12:16:46 GMT</pubDate></item></channel></rss>