<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[High Carbon High]]></title><description><![CDATA[<p dir="auto">I’m coming out right now: I have fallen in love with high carbon steel knives.</p>
<p dir="auto">I don’t mean just Damascus. I love the silver grey cast of pure, lowly esteemed, old fashioned, high carbon steel—the stuff that everyone runs from because it rusts!</p>
<p dir="auto">I have no fear of rust—none at all. I even like a little rust sometimes, just because it makes me clean it up. But I use a wax on a high carbon pocket knife and it really never needs a clean up. Wax stops rust dead. Just dry it off. And apply a little wax and it’s ready.</p>
<p dir="auto">I have a small tail lock COYOTE made in Providence that has fine brass bolsters and green Delrin, saw cut scales with not two, not three, but four brass pins holding it together! All you GEC fans will understand four pin construction. The market thinks a Coyote tail lock with high carbon steel is worth nothing. Wrong! I LOVE this knife. This knife is to die for, if you love high carbon, as I do now.</p>
<p dir="auto">Like many, I got my first taste of HC on a Mora, and I had a snit, because it rusted on me. I didn’t know about wax back then. Now I do and I love those HC Moras again.</p>
<p dir="auto">But my heavyweight favorite among my HC blades is “Betty”, my Briddell No. 860 6” meat cleaver!!!</p>
<p dir="auto">I have had racks of ribs literally jump off the butcher block and run when they see me coming with Betty  all dark grey and glistening with olive oil.</p>
<p dir="auto">Like Griswold cast iron skillets and Dutch ovens, Betty is actually enhanced by rust. Betty is like a real red head. She wouldn’t look right without a little rust color around her edges.</p>
<p dir="auto">Betty is the law in our kitchen. When Betty comes down, things come APART.</p>
<p dir="auto">There is no sawing with Betty, though she can’t take a great edge and could be used like fiddle bow if someone wanted to. But why would ANYONE want to?!!!</p>
<p dir="auto">Betty and Coyote are the opposite ends of my love affair with high carbon blades.</p>
<p dir="auto">I hope you will share some of your high carbon cutting devices on this thread.</p>
<p dir="auto">Thanks in advance.</p>
<p dir="auto">And the thinner the better, or the thicker the best.</p>
<p dir="auto">P.S.: Note the Spyderhole on Betty. Just like on some of Sal’s fixies. Every thing old is new again!</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/488510_AD3687E1-167A-4C61-913C-9BABEB84D84B.jpeg" alt="AD3687E1-167A-4C61-913C-9BABEB84D84B.jpeg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/488512_FAB93496-9A35-4D35-960D-46B73A0305B0.jpeg" alt="FAB93496-9A35-4D35-960D-46B73A0305B0.jpeg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/topic/85589/high-carbon-high</link><generator>RSS for Node</generator><lastBuildDate>Wed, 18 Nov 2026 13:45:02 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/85589.rss" rel="self" type="application/rss+xml"/><pubDate>Tue, 22 Sep 2020 00:23:17 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to High Carbon High on Sun, 04 Oct 2020 17:05:21 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/agreesign.gif" alt=":iagree:" title="I agree" class="forum-smiley emoji" />. I saw a list somewhere that had to total in the low hundreds just here in the States.</p>
]]></description><link>https://multitool.ninja/post/2166651</link><guid isPermaLink="true">https://multitool.ninja/post/2166651</guid><dc:creator><![CDATA[Barry Rowland]]></dc:creator><pubDate>Sun, 04 Oct 2020 17:05:21 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Sat, 03 Oct 2020 05:12:06 GMT]]></title><description><![CDATA[<p dir="auto">Pretty stoked to have found it.  When I got home and did a little research I was pretty surprised to learn about this company.   There is not enough time to learn all I want with so many companies that have come and gone.</p>
]]></description><link>https://multitool.ninja/post/2166215</link><guid isPermaLink="true">https://multitool.ninja/post/2166215</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Sat, 03 Oct 2020 05:12:06 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Fri, 02 Oct 2020 23:11:22 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/aloha" aria-label="Profile: Aloha">@<bdi>Aloha</bdi></a> <a href="/post/2166109">said</a>:<br />
Kinfolks</p>
</blockquote>
<p dir="auto">Nice knife and a great piece of history!     <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />      <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2166169</link><guid isPermaLink="true">https://multitool.ninja/post/2166169</guid><dc:creator><![CDATA[David]]></dc:creator><pubDate>Fri, 02 Oct 2020 23:11:22 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Fri, 02 Oct 2020 20:56:17 GMT]]></title><description><![CDATA[<p dir="auto">Kinfolks</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/489267_IMG_1432.jpg" alt="IMG_1432.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2166109</link><guid isPermaLink="true">https://multitool.ninja/post/2166109</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Fri, 02 Oct 2020 20:56:17 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Fri, 02 Oct 2020 20:46:34 GMT]]></title><description><![CDATA[<p dir="auto">David breaking out the Randalllllllllllll<br />
Verrry Randleicious<br />
Having Randeiian integration of form!<br />
Taking us into the Randleverse<br />
Making us see how all knives might be...</p>
<p dir="auto">It is a beaut.</p>
]]></description><link>https://multitool.ninja/post/2166105</link><guid isPermaLink="true">https://multitool.ninja/post/2166105</guid><dc:creator><![CDATA[SgtTowser]]></dc:creator><pubDate>Fri, 02 Oct 2020 20:46:34 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Mon, 28 Sep 2020 11:44:34 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/day_dream.gif" alt=":dd:" title="day dream" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2164767</link><guid isPermaLink="true">https://multitool.ninja/post/2164767</guid><dc:creator><![CDATA[SteveC]]></dc:creator><pubDate>Mon, 28 Sep 2020 11:44:34 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Sun, 27 Sep 2020 17:22:46 GMT]]></title><description><![CDATA[<p dir="auto">Randall #5 in O-1 steel</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/488837_IMG_4802.JPG" alt="IMG_4802.JPG" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2164611</link><guid isPermaLink="true">https://multitool.ninja/post/2164611</guid><dc:creator><![CDATA[David]]></dc:creator><pubDate>Sun, 27 Sep 2020 17:22:46 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Sun, 27 Sep 2020 17:10:53 GMT]]></title><description><![CDATA[<p dir="auto">Buck 112 in 5160</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/488835_IMG_4798.JPG" alt="IMG_4798.JPG" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2164609</link><guid isPermaLink="true">https://multitool.ninja/post/2164609</guid><dc:creator><![CDATA[David]]></dc:creator><pubDate>Sun, 27 Sep 2020 17:10:53 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Sun, 27 Sep 2020 14:18:07 GMT]]></title><description><![CDATA[<p dir="auto">I have Frog Lube oil and paste.  I've used both and they do the trick on the items I have stored away.  I've also made my own paste using beeswax and mineral oil that I've used on my leather and wood handles.  It seems to work good on my Old Hickory carbon steel blade as well.</p>
<p dir="auto">I've been using my Carbon steel Great Eastern Cutlery fixed blade a lot and the patina developed also keeps surface rusting away ( yes I know this sounds  )   ;).</p>
]]></description><link>https://multitool.ninja/post/2164561</link><guid isPermaLink="true">https://multitool.ninja/post/2164561</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Sun, 27 Sep 2020 14:18:07 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Sat, 26 Sep 2020 01:00:44 GMT]]></title><description><![CDATA[<p dir="auto">Thanks Sgt T!  Yes, it works like a charm.</p>
]]></description><link>https://multitool.ninja/post/2164136</link><guid isPermaLink="true">https://multitool.ninja/post/2164136</guid><dc:creator><![CDATA[Barry Rowland]]></dc:creator><pubDate>Sat, 26 Sep 2020 01:00:44 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Fri, 25 Sep 2020 02:39:36 GMT]]></title><description><![CDATA[<p dir="auto">Barry</p>
<p dir="auto">Thanks for mentioning Case paste.These are the kinds of tid bits that the newbies down the road will appreciate. I had heard of it, but it is reassuring to know that someone that knows a bit about knives has tried it and found it helpful.</p>
]]></description><link>https://multitool.ninja/post/2163940</link><guid isPermaLink="true">https://multitool.ninja/post/2163940</guid><dc:creator><![CDATA[SgtTowser]]></dc:creator><pubDate>Fri, 25 Sep 2020 02:39:36 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Fri, 25 Sep 2020 02:37:12 GMT]]></title><description><![CDATA[<p dir="auto">Toolguy</p>
<p dir="auto">Thanks for recalling it. I know I am mostly in over my head here with all of you, but I greatly appreciate you cutting me some slack. I am learning a lot every day now. And I am grateful to all.</p>
]]></description><link>https://multitool.ninja/post/2163939</link><guid isPermaLink="true">https://multitool.ninja/post/2163939</guid><dc:creator><![CDATA[SgtTowser]]></dc:creator><pubDate>Fri, 25 Sep 2020 02:37:12 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Fri, 25 Sep 2020 02:05:10 GMT]]></title><description><![CDATA[<p dir="auto">I've even used Case paste on mine.  I have been a high carbon steel fan for many years.</p>
]]></description><link>https://multitool.ninja/post/2163931</link><guid isPermaLink="true">https://multitool.ninja/post/2163931</guid><dc:creator><![CDATA[Barry Rowland]]></dc:creator><pubDate>Fri, 25 Sep 2020 02:05:10 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Fri, 25 Sep 2020 00:29:20 GMT]]></title><description><![CDATA[<p dir="auto">This is another Buck 112 using 5160 steel for a drop point blade.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/488685_buck-112-dp-modified-1.JPG" alt="buck-112-dp-modified-1.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/488687_buck-112-dp-modified2-1.JPG" alt="buck-112-dp-modified2-1.JPG" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2163913</link><guid isPermaLink="true">https://multitool.ninja/post/2163913</guid><dc:creator><![CDATA[toolguy]]></dc:creator><pubDate>Fri, 25 Sep 2020 00:29:20 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Fri, 25 Sep 2020 00:21:44 GMT]]></title><description><![CDATA[<p dir="auto">It's Renaissance Wax or Ren Wax.</p>
<p dir="auto">I've been using it for several decades.</p>
]]></description><link>https://multitool.ninja/post/2163911</link><guid isPermaLink="true">https://multitool.ninja/post/2163911</guid><dc:creator><![CDATA[toolguy]]></dc:creator><pubDate>Fri, 25 Sep 2020 00:21:44 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Thu, 24 Sep 2020 20:40:00 GMT]]></title><description><![CDATA[<p dir="auto">Barry,</p>
<p dir="auto">It’s hard to explain to folks that haven’t used them.</p>
<p dir="auto">Also, use wax on them and rust is really not that much of a concern. I use a kind of wax developed by the British Museum of Natural History (their equivalent of our Smithsonian). They use it on all ancient metal artifacts as a protection against oxidization. It works great on any knife you really can’t bear to see a little rust on, and don’t want to oil  and watch constantly. Sorry I can’t think of the product name. Seems a little pricey at first but a teeny amount goes a long way.</p>
]]></description><link>https://multitool.ninja/post/2163853</link><guid isPermaLink="true">https://multitool.ninja/post/2163853</guid><dc:creator><![CDATA[SgtTowser]]></dc:creator><pubDate>Thu, 24 Sep 2020 20:40:00 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Thu, 24 Sep 2020 13:07:34 GMT]]></title><description><![CDATA[<p dir="auto">I love my high carbon steel knives.  To this day, a lot of the farmers in my area refuse to carry stainless.</p>
]]></description><link>https://multitool.ninja/post/2163771</link><guid isPermaLink="true">https://multitool.ninja/post/2163771</guid><dc:creator><![CDATA[Barry Rowland]]></dc:creator><pubDate>Thu, 24 Sep 2020 13:07:34 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Thu, 24 Sep 2020 03:50:10 GMT]]></title><description><![CDATA[<p dir="auto">Aloha,</p>
<p dir="auto">covered on hatchets now, but good future reference.</p>
]]></description><link>https://multitool.ninja/post/2163714</link><guid isPermaLink="true">https://multitool.ninja/post/2163714</guid><dc:creator><![CDATA[SgtTowser]]></dc:creator><pubDate>Thu, 24 Sep 2020 03:50:10 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Thu, 24 Sep 2020 03:48:36 GMT]]></title><description><![CDATA[<p dir="auto">Toolguy</p>
<p dir="auto">Very interesting buck exclusives. Impressive!</p>
<p dir="auto"><img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2163713</link><guid isPermaLink="true">https://multitool.ninja/post/2163713</guid><dc:creator><![CDATA[SgtTowser]]></dc:creator><pubDate>Thu, 24 Sep 2020 03:48:36 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Wed, 23 Sep 2020 04:55:46 GMT]]></title><description><![CDATA[<p dir="auto">How about a GENZOW HATCHETHAWK in 5160 from Spyderco?  <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2163513</link><guid isPermaLink="true">https://multitool.ninja/post/2163513</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Wed, 23 Sep 2020 04:55:46 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Tue, 22 Sep 2020 23:45:37 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sgttowser" aria-label="Profile: SgtTowser">@<bdi>SgtTowser</bdi></a> <a href="/post/2163463">said</a>:<br />
Thank you, tool guy!!!!!<br />
I love Bucks and now I have to find a 110 and a 119.<br />
By any chance did Buck make any 112 s in 5160?  I would like to pick up a mate for my 112 in S30V. Oops, now I see the pics above. Yessssssss.<br />
These are my ideals. So glad you woke me to them.<br />
Dare I ask? Has Spyderco made any folders with 5160 the last ten years or so?</p>
</blockquote>
<p dir="auto">This dealer has pioneered the use of 5160 in the Buck line-up.</p>
<p dir="auto"><div class="card col-md-9 col-lg-6 position-relative link-preview p-0">



<a href="https://copperandclad.com/" title="Factory Exclusive Buck Knives">
<img src="https://copperandclad.com/wp-content/uploads/2019/08/CopperClad_Logo_color-02.png" class="card-img-top not-responsive" style="max-height: 15rem;" alt="Link Preview Image" onerror="this.parentElement.remove()" />
</a>



<div class="card-body">
<h5 class="card-title">
<a class="text-decoration-none" href="https://copperandclad.com/">
Factory Exclusive Buck Knives
</a>
</h5>
<p class="card-text line-clamp-3">FACTORY EXCLUSIVEBUCK KNIVES Tools Built With Pride For Over 115 Years Shop Buck Knives Shop Benchmade Shop Boker Shop Spyderco Exclusives New Arrivals On Sale Benchmade 18065BT-01 Mini Adira Folding Knife, 3.21″ CPM-MagnaCut Blue Cerakote Drop Point Blade, Depth Blue Grivory Handle W/ Clip $240.00 Add to cart Benchmade 18060BT-01 Adira Folding Knife, 3.88″ CPM-MagnaCut</p>
</div>
<a href="https://copperandclad.com/" class="card-footer text-body-secondary small d-flex gap-2 align-items-center lh-2">



<img src="https://copperandclad.com/wp-content/uploads/2019/09/cropped-CopperClad_Favicon-32x32.png" alt="favicon" class="not-responsive overflow-hiddden" style="max-width: 21px; max-height: 21px;" onerror="this.remove()"/>







<p class="d-inline-block text-truncate mb-0">Copper and Clad <span class="text-secondary">(copperandclad.com)</span></p>
</a>
</div></p>
]]></description><link>https://multitool.ninja/post/2163477</link><guid isPermaLink="true">https://multitool.ninja/post/2163477</guid><dc:creator><![CDATA[toolguy]]></dc:creator><pubDate>Tue, 22 Sep 2020 23:45:37 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Tue, 22 Sep 2020 22:58:25 GMT]]></title><description><![CDATA[<p dir="auto">OMG! That Randle is insanely great!!!!</p>
]]></description><link>https://multitool.ninja/post/2163471</link><guid isPermaLink="true">https://multitool.ninja/post/2163471</guid><dc:creator><![CDATA[SgtTowser]]></dc:creator><pubDate>Tue, 22 Sep 2020 22:58:25 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Tue, 22 Sep 2020 23:50:00 GMT]]></title><description><![CDATA[<p dir="auto">Not that I know of. Spyderco has made a Mule and a Military in 52100. Some might not consider it pure high carbon steel as its has a touch over 1% chromium in it. The Bushcraft was made in O-1 steel.</p>
]]></description><link>https://multitool.ninja/post/2163470</link><guid isPermaLink="true">https://multitool.ninja/post/2163470</guid><dc:creator><![CDATA[David]]></dc:creator><pubDate>Tue, 22 Sep 2020 23:50:00 GMT</pubDate></item><item><title><![CDATA[Reply to High Carbon High on Tue, 22 Sep 2020 22:54:53 GMT]]></title><description><![CDATA[<p dir="auto">Thank you, tool guy!!!!!</p>
<p dir="auto">I love Bucks and now I have to find a 110 and a 119.</p>
<p dir="auto">By any chance did Buck make any 112 s in 5160?  I would like to pick up a mate for my 112 in S30V. Oops, now I see the pics above. Yessssssss.</p>
<p dir="auto">These are my ideals. So glad you woke me to them.</p>
<p dir="auto">Dare I ask? Has Spyderco made any folders with 5160 the last ten years or so?</p>
]]></description><link>https://multitool.ninja/post/2163463</link><guid isPermaLink="true">https://multitool.ninja/post/2163463</guid><dc:creator><![CDATA[SgtTowser]]></dc:creator><pubDate>Tue, 22 Sep 2020 22:54:53 GMT</pubDate></item></channel></rss>