<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Old Singer sewing machine]]></title><description><![CDATA[<p dir="auto">Currently learning to work a bit with an old Singer VS3 hand sewing machine made in 1890.<br />
When new a machine like this would cost you about a month's wages, but nowadays these can be bought for only a handful of euro's.<br />
I paid 10 Euro for mine, and there are literally dozens more where this one came from for similar prices.</p>
<p dir="auto">These high quality machines were made well before the era of planned obsolescence, and are basically indestructible.<br />
The inner workings on this one were covered in a shiny brown veneer that once used to be whale oil, but once that was removed and replaced by a few drops of 5 weight Nano-Oil here and there the machine works almost like new again.<br />
Also disassembled the wiggly wood parts to remove the remnants of the dried out bone glue, and then reglued everything with a good quality waterproof wood glue.<br />
Very useful if you want to take the machine with you to use in places without power sockets.</p>
<p dir="auto">The machine uses 15x1 size needles and easily stitches two parts of an old leather belt together (total leather thickness ~7,35 mm), so it just might work to make a simple leather knife sheath now and then (if i don't use overly thick leather)<br />
Also does very well for jeans, t-shirts, bed linen, etc.</p>
<p dir="auto">&lt;a href=&quot;<a href="https://ibb.co/j3dLwSV" rel="nofollow ugc">https://ibb.co/j3dLwSV</a>&quot; target=&quot;_blank&quot; rel=&quot;noopener noreferrer&quot;&gt;&lt;img src=&quot;<a href="https://i.ibb.co/7rHGpqg/GE-DIGITAL-CAMERA.jpg" rel="nofollow ugc">https://i.ibb.co/7rHGpqg/GE-DIGITAL-CAMERA.jpg</a>&quot; alt=&quot;banner&quot; style=&quot;max-width: 100%; height: auto;&quot; /&gt;&lt;/a&gt;<br />
&lt;a href=&quot;<a href="https://ibb.co/h7VmjCs" rel="nofollow ugc">https://ibb.co/h7VmjCs</a>&quot; target=&quot;_blank&quot; rel=&quot;noopener noreferrer&quot;&gt;&lt;img src=&quot;<a href="https://i.ibb.co/0DrGSQq/GE-DIGITAL-CAMERA.jpg" rel="nofollow ugc">https://i.ibb.co/0DrGSQq/GE-DIGITAL-CAMERA.jpg</a>&quot; alt=&quot;banner&quot; style=&quot;max-width: 100%; height: auto;&quot; /&gt;&lt;/a&gt;<br />
&lt;a href=&quot;<a href="https://ibb.co/1dfvVXc" rel="nofollow ugc">https://ibb.co/1dfvVXc</a>&quot; target=&quot;_blank&quot; rel=&quot;noopener noreferrer&quot;&gt;&lt;img src=&quot;<a href="https://i.ibb.co/8dDK3xk/GE-DIGITAL-CAMERA.jpg" rel="nofollow ugc">https://i.ibb.co/8dDK3xk/GE-DIGITAL-CAMERA.jpg</a>&quot; alt=&quot;banner&quot; style=&quot;max-width: 100%; height: auto;&quot; /&gt;&lt;/a&gt;<br />
&lt;a href=&quot;<a href="https://ibb.co/W6g73FL" rel="nofollow ugc">https://ibb.co/W6g73FL</a>&quot; target=&quot;_blank&quot; rel=&quot;noopener noreferrer&quot;&gt;&lt;img src=&quot;<a href="https://i.ibb.co/PNwJY4d/GE-DIGITAL-CAMERA.jpg" rel="nofollow ugc">https://i.ibb.co/PNwJY4d/GE-DIGITAL-CAMERA.jpg</a>&quot; alt=&quot;banner&quot; style=&quot;max-width: 100%; height: auto;&quot; /&gt;&lt;/a&gt;<br />
&lt;a href=&quot;<a href="https://ibb.co/ZzktyDQ" rel="nofollow ugc">https://ibb.co/ZzktyDQ</a>&quot; target=&quot;_blank&quot; rel=&quot;noopener noreferrer&quot;&gt;&lt;img src=&quot;<a href="https://i.ibb.co/Mk3Wq0z/GE-DIGITAL-CAMERA.jpg" rel="nofollow ugc">https://i.ibb.co/Mk3Wq0z/GE-DIGITAL-CAMERA.jpg</a>&quot; alt=&quot;banner&quot; style=&quot;max-width: 100%; height: auto;&quot; /&gt;&lt;/a&gt;<br />
&lt;a href=&quot;<a href="https://ibb.co/fC8Q4BC" rel="nofollow ugc">https://ibb.co/fC8Q4BC</a>&quot; target=&quot;_blank&quot; rel=&quot;noopener noreferrer&quot;&gt;&lt;img src=&quot;<a href="https://i.ibb.co/mHvS61H/GE-DIGITAL-CAMERA.jpg" rel="nofollow ugc">https://i.ibb.co/mHvS61H/GE-DIGITAL-CAMERA.jpg</a>&quot; alt=&quot;banner&quot; style=&quot;max-width: 100%; height: auto;&quot; /&gt;&lt;/a&gt;<br />
&lt;a href=&quot;<a href="https://ibb.co/BLbbjdc" rel="nofollow ugc">https://ibb.co/BLbbjdc</a>&quot; target=&quot;_blank&quot; rel=&quot;noopener noreferrer&quot;&gt;&lt;img src=&quot;<a href="https://i.ibb.co/b1TTLqQ/GE-DIGITAL-CAMERA.jpg" rel="nofollow ugc">https://i.ibb.co/b1TTLqQ/GE-DIGITAL-CAMERA.jpg</a>&quot; alt=&quot;banner&quot; style=&quot;max-width: 100%; height: auto;&quot; /&gt;&lt;/a&gt;<br />
&lt;a href=&quot;<a href="https://ibb.co/mvj3BMS" rel="nofollow ugc">https://ibb.co/mvj3BMS</a>&quot; target=&quot;_blank&quot; rel=&quot;noopener noreferrer&quot;&gt;&lt;img src=&quot;<a href="https://i.ibb.co/DGJZbSL/GE-DIGITAL-CAMERA.jpg" rel="nofollow ugc">https://i.ibb.co/DGJZbSL/GE-DIGITAL-CAMERA.jpg</a>&quot; alt=&quot;banner&quot; style=&quot;max-width: 100%; height: auto;&quot; /&gt;&lt;/a&gt;<br />
&lt;a href=&quot;<a href="https://ibb.co/NWm58DJ" rel="nofollow ugc">https://ibb.co/NWm58DJ</a>&quot; target=&quot;_blank&quot; rel=&quot;noopener noreferrer&quot;&gt;&lt;img src=&quot;<a href="https://i.ibb.co/ygYtwvZ/GE-DIGITAL-CAMERA.jpg" rel="nofollow ugc">https://i.ibb.co/ygYtwvZ/GE-DIGITAL-CAMERA.jpg</a>&quot; alt=&quot;banner&quot; style=&quot;max-width: 100%; height: auto;&quot; /&gt;&lt;/a&gt;<br />
&lt;a href=&quot;<a href="https://ibb.co/ryRJZsD" rel="nofollow ugc">https://ibb.co/ryRJZsD</a>&quot; target=&quot;_blank&quot; rel=&quot;noopener noreferrer&quot;&gt;&lt;img src=&quot;<a href="https://i.ibb.co/zfTwSJq/GE-DIGITAL-CAMERA.jpg" rel="nofollow ugc">https://i.ibb.co/zfTwSJq/GE-DIGITAL-CAMERA.jpg</a>&quot; alt=&quot;banner&quot; style=&quot;max-width: 100%; height: auto;&quot; /&gt;&lt;/a&gt;</p>
<p dir="auto">Also found this wonderful 1934 documentary about the manufacturing processes involved in making a Singer sewing machine at Clydebank, Glasgow, from its raw form of iron to the finished product packed and ready for export.<br />
Sadly without sound, but well worth it (if you like these kind of things)</p>
<p dir="auto"><div class="card col-md-9 col-lg-6 position-relative link-preview p-0">

<div class="card-body">
<h5 class="card-title">
<a class="text-decoration-none" href="https://movingimage.nls.uk/film/1592">
Human Verification
</a>
</h5>
<p class="card-text line-clamp-3"></p>
</div>
<a href="https://movingimage.nls.uk/film/1592" class="card-footer text-body-secondary small d-flex gap-2 align-items-center lh-2">



<img src="https://movingimage.nls.uk/favicon.ico" alt="favicon" class="not-responsive overflow-hiddden" style="max-width: 21px; max-height: 21px;" onerror="this.remove()"/>



<p class="d-inline-block text-truncate mb-0"> <span class="text-secondary">(movingimage.nls.uk)</span></p>
</a>
</div></p>
<p dir="auto">​</p>
]]></description><link>https://multitool.ninja/topic/87503/old-singer-sewing-machine</link><generator>RSS for Node</generator><lastBuildDate>Wed, 18 Nov 2026 18:42:52 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/87503.rss" rel="self" type="application/rss+xml"/><pubDate>Mon, 31 May 2021 11:24:47 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Old Singer sewing machine on Tue, 01 Jun 2021 11:43:07 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2250270</link><guid isPermaLink="true">https://multitool.ninja/post/2250270</guid><dc:creator><![CDATA[SteveC]]></dc:creator><pubDate>Tue, 01 Jun 2021 11:43:07 GMT</pubDate></item><item><title><![CDATA[Reply to Old Singer sewing machine on Tue, 01 Jun 2021 07:06:54 GMT]]></title><description><![CDATA[<p dir="auto">This is my second machine, a model 128 in a treadle, dating from 1925.<br />
We found it standing on the pavement in front of the home of an older lady, who was going to a smaller apartment and wanted to get rid of it.<br />
She still remembered her grandmother working with it back in the 1930's, but her mother and she had only kept it all these years for home decoration.<br />
For 15 Euro we could take it with us :-)</p>
<p dir="auto">Sadly a few rainy days and nights outside had damaged the wooden table and case somewhat, but the machine itself was still unharmed as it had been covered by the wooden case.<br />
After i sanded the table i liked the wood grain so much (i think it may be red cedar) that i only treated it with several layers of a good quality mineral oil, and the drawers which normally hang under the table will get the same treatment.<br />
The machine has been cleaned and oiled, it has been fitted with a new rubber wheel for it's bobbin winder, and a new leather belt that connects the treadle with the machine is on it's way. (E-Bay)<br />
The treadle mechanism itself already ran smooth &amp; silently on it's ball bearings, but i gave those a few drops of 5 weight Nano-Oil anyway.</p>
<p dir="auto">&lt;a href="<a href="https://ibb.co/171TLXH" rel="nofollow ugc">https://ibb.co/171TLXH</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="https://i.ibb.co/RYfc96L/GE-DIGITAL-CAMERA.jpg" rel="nofollow ugc">https://i.ibb.co/RYfc96L/GE-DIGITAL-CAMERA.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
&lt;a href="<a href="https://ibb.co/PYHL4cZ" rel="nofollow ugc">https://ibb.co/PYHL4cZ</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="https://i.ibb.co/7zmfVnJ/GE-DIGITAL-CAMERA.jpg" rel="nofollow ugc">https://i.ibb.co/7zmfVnJ/GE-DIGITAL-CAMERA.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
&lt;a href="<a href="https://ibb.co/FbBPP08" rel="nofollow ugc">https://ibb.co/FbBPP08</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="https://i.ibb.co/nsDWWnQ/GE-DIGITAL-CAMERA.jpg" rel="nofollow ugc">https://i.ibb.co/nsDWWnQ/GE-DIGITAL-CAMERA.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
&lt;a href="<a href="https://ibb.co/FmsSJ54" rel="nofollow ugc">https://ibb.co/FmsSJ54</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="https://i.ibb.co/7jgwVnt/GE-DIGITAL-CAMERA.jpg" rel="nofollow ugc">https://i.ibb.co/7jgwVnt/GE-DIGITAL-CAMERA.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
]]></description><link>https://multitool.ninja/post/2250237</link><guid isPermaLink="true">https://multitool.ninja/post/2250237</guid><dc:creator><![CDATA[kwakster]]></dc:creator><pubDate>Tue, 01 Jun 2021 07:06:54 GMT</pubDate></item><item><title><![CDATA[Reply to Old Singer sewing machine on Tue, 01 Jun 2021 01:18:35 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/kwakster" aria-label="Profile: kwakster">@<bdi>kwakster</bdi></a> <a href="/post/2250091">said</a>:<br />
Mine is hand cranked using the small white porcelain handle.</p>
</blockquote>
<p dir="auto">Ahh I see... I'm sure it wasn't in the photos when I first looked last night.  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2250187</link><guid isPermaLink="true">https://multitool.ninja/post/2250187</guid><dc:creator><![CDATA[Syncop8r]]></dc:creator><pubDate>Tue, 01 Jun 2021 01:18:35 GMT</pubDate></item><item><title><![CDATA[Reply to Old Singer sewing machine on Mon, 31 May 2021 23:27:20 GMT]]></title><description><![CDATA[<p dir="auto">That is a thing of beauty !   <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2250167</link><guid isPermaLink="true">https://multitool.ninja/post/2250167</guid><dc:creator><![CDATA[SteveC]]></dc:creator><pubDate>Mon, 31 May 2021 23:27:20 GMT</pubDate></item><item><title><![CDATA[Reply to Old Singer sewing machine on Mon, 31 May 2021 22:01:21 GMT]]></title><description><![CDATA[<p dir="auto">Schmetz makes a good needle.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2250145</link><guid isPermaLink="true">https://multitool.ninja/post/2250145</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Mon, 31 May 2021 22:01:21 GMT</pubDate></item><item><title><![CDATA[Reply to Old Singer sewing machine on Mon, 31 May 2021 19:30:44 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/madplumbarian" aria-label="Profile: MadPlumbarian">@<bdi>MadPlumbarian</bdi></a> <a href="/post/2250023">said</a>:<br />
True that! Of course I’ve run out of needles so I can’t do anything,,<br />
JR</p>
</blockquote>
<p dir="auto">Machine needles that fit these old Singers can still be bought in any good sewing store.<br />
I bought some thicker pointed ones for jeans and some chisel-pointed ones for leather from the Schmetz brand.</p>
]]></description><link>https://multitool.ninja/post/2250094</link><guid isPermaLink="true">https://multitool.ninja/post/2250094</guid><dc:creator><![CDATA[kwakster]]></dc:creator><pubDate>Mon, 31 May 2021 19:30:44 GMT</pubDate></item><item><title><![CDATA[Reply to Old Singer sewing machine on Mon, 31 May 2021 19:26:29 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/syncop8r" aria-label="Profile: Syncop8r">@<bdi>Syncop8r</bdi></a> <a href="/post/2249942">said</a>:<br />
I have something similar (somewhere <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> ) operated with a knee bar.<br />
How is yours controlled?</p>
</blockquote>
<p dir="auto">Mine is hand cranked using the small white porcelain handle.<br />
Nowhere near as fast as a powered one like yours, but fast enough for smaller jobs.<br />
In the pics the white handle is still folded for transport in the wooden case, for use it needs to be flipped to the other side.</p>
]]></description><link>https://multitool.ninja/post/2250091</link><guid isPermaLink="true">https://multitool.ninja/post/2250091</guid><dc:creator><![CDATA[kwakster]]></dc:creator><pubDate>Mon, 31 May 2021 19:26:29 GMT</pubDate></item><item><title><![CDATA[Reply to Old Singer sewing machine on Mon, 31 May 2021 16:27:10 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nix" aria-label="Profile: Nix">@<bdi>Nix</bdi></a> <a href="/post/2249970">said</a>:<br />
Beautiful old machine.</p>
<p dir="auto">I gotta say, a sewing machine is a handy tool to be able to use!   <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">True that! Of course I’ve run out of needles so I can’t do anything,,<br />
JR</p>
]]></description><link>https://multitool.ninja/post/2250023</link><guid isPermaLink="true">https://multitool.ninja/post/2250023</guid><dc:creator><![CDATA[MadPlumbarian]]></dc:creator><pubDate>Mon, 31 May 2021 16:27:10 GMT</pubDate></item><item><title><![CDATA[Reply to Old Singer sewing machine on Mon, 31 May 2021 14:29:23 GMT]]></title><description><![CDATA[<p dir="auto">Beautiful old machine.</p>
<p dir="auto">I gotta say, a sewing machine is a handy tool to be able to use!   <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2249970</link><guid isPermaLink="true">https://multitool.ninja/post/2249970</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Mon, 31 May 2021 14:29:23 GMT</pubDate></item><item><title><![CDATA[Reply to Old Singer sewing machine on Mon, 31 May 2021 13:35:09 GMT]]></title><description><![CDATA[<p dir="auto">I thought mine was old but mines pink and in a plastic case, but dang that’s a freaking antique! Beauty!<br />
JR</p>
]]></description><link>https://multitool.ninja/post/2249947</link><guid isPermaLink="true">https://multitool.ninja/post/2249947</guid><dc:creator><![CDATA[MadPlumbarian]]></dc:creator><pubDate>Mon, 31 May 2021 13:35:09 GMT</pubDate></item><item><title><![CDATA[Reply to Old Singer sewing machine on Mon, 31 May 2021 13:17:55 GMT]]></title><description><![CDATA[<p dir="auto">I have something similar (somewhere <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> ) operated with a knee bar.<br />
How is yours controlled?</p>
]]></description><link>https://multitool.ninja/post/2249942</link><guid isPermaLink="true">https://multitool.ninja/post/2249942</guid><dc:creator><![CDATA[Syncop8r]]></dc:creator><pubDate>Mon, 31 May 2021 13:17:55 GMT</pubDate></item></channel></rss>