<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Removing the keyring/lanyard loop.]]></title><description><![CDATA[<p dir="auto">I watched some youtube vids and read some forum posts regarding the removal of the keyring loop from Alox saks. The general recommendation for protecting the scales while filing off the loop is to apply some masking tape. I tried this and found that masking tape provides close to zero protection from a rough file. One slip, and you make a mess of the scales. This is partly my fault, as I always start a job with good intentions of being careful, but then get impatience and make mistakes. So I tried to come up with a foolproof solution.</p>
<p dir="auto">Shim steel.  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
<p dir="auto">Masking tape first</p>
<p dir="auto"><img src="https://i.postimg.cc/44vwm2Kn/IMG-6735.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Then a strip of shim steel on either side of the loop.</p>
<p dir="auto"><img src="https://i.postimg.cc/7631JbZj/IMG-6742.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.postimg.cc/G2wJpvdk/IMG-6745.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.postimg.cc/dt4B97jY/IMG-6749.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Carelessly file with a large smurf file.</p>
<p dir="auto"><img src="https://i.postimg.cc/q7Cx01VJ/IMG-6752.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Polish with dremel type tool.</p>
<p dir="auto"><img src="https://i.postimg.cc/mgkSpbmF/IMG-6759.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Someone with more patience and talent than myself would not need to go to this extra trouble, but it was nice to know there was pretty much no way I could mess this up.</p>
<p dir="auto"><img src="https://i.postimg.cc/X7VLFKFL/IMG-6763.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.postimg.cc/MpLmhhL3/IMG-6774.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Edit 'smurf file' = Forum censored the term used for a 'rough' file.</p>
]]></description><link>https://multitool.ninja/topic/88129/removing-the-keyringlanyard-loop</link><generator>RSS for Node</generator><lastBuildDate>Fri, 20 Nov 2026 02:17:27 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/88129.rss" rel="self" type="application/rss+xml"/><pubDate>Wed, 15 Sep 2021 09:59:11 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Removing the keyring/lanyard loop. on Sun, 03 Apr 2022 16:49:05 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/lemo" aria-label="Profile: lemo">@<bdi>lemo</bdi></a> <a href="/post/2279835">said</a>:<br />
I watched some youtube vids and read some forum posts regarding the removal of the keyring loop from Alox saks. The general recommendation for protecting the scales while filing off the loop is to apply some masking tape. I tried this and found that masking tape provides close to zero protection from a rough file. One slip, and you make a mess of the scales. This is partly my fault, as I always start a job with good intentions of being careful, but then get impatience and make mistakes. So I tried to come up with a foolproof solution.</p>
<p dir="auto">Shim steel.  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
<p dir="auto">Masking tape first</p>
<p dir="auto"><img src="https://i.postimg.cc/44vwm2Kn/IMG-6735.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Then a strip of shim steel on either side of the loop.</p>
<p dir="auto"><img src="https://i.postimg.cc/7631JbZj/IMG-6742.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.postimg.cc/G2wJpvdk/IMG-6745.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.postimg.cc/dt4B97jY/IMG-6749.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Carelessly file with a large smurf file.</p>
<p dir="auto"><img src="https://i.postimg.cc/q7Cx01VJ/IMG-6752.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Polish with dremel type tool.</p>
<p dir="auto"><img src="https://i.postimg.cc/mgkSpbmF/IMG-6759.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Someone with more patience and talent than myself would not need to go to this extra trouble, but it was nice to know there was pretty much no way I could mess this up.</p>
<p dir="auto"><img src="https://i.postimg.cc/X7VLFKFL/IMG-6763.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://i.postimg.cc/MpLmhhL3/IMG-6774.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Edit 'smurf file' = Forum censored the term used for a 'rough' file.</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /><br />
Very good and precise work.</p>
]]></description><link>https://multitool.ninja/post/2330720</link><guid isPermaLink="true">https://multitool.ninja/post/2330720</guid><dc:creator><![CDATA[Gio_Luso]]></dc:creator><pubDate>Sun, 03 Apr 2022 16:49:05 GMT</pubDate></item><item><title><![CDATA[Reply to Removing the keyring/lanyard loop. on Sun, 03 Apr 2022 04:23:46 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/farmer" aria-label="Profile: Farmer">@<bdi>Farmer</bdi></a> X <a href="/post/2279934">said</a>:<br />
"Smurf file" had me scratching my head. Was that UK terminology I hadn't heard before? Then I got to the end of the first post. I would have understood immediately if the filter substituted the word "illegitimate," but "smurf file" sounds a lot funnier.</p>
</blockquote>
<p dir="auto">The profanity filter here removes any word it finds offensive and replaces it with the word “smurf”.  Results in some pretty funny stuff, especially when it does it with part of a very common word, e.g. wrissmurfch.</p>
]]></description><link>https://multitool.ninja/post/2330590</link><guid isPermaLink="true">https://multitool.ninja/post/2330590</guid><dc:creator><![CDATA[nate j]]></dc:creator><pubDate>Sun, 03 Apr 2022 04:23:46 GMT</pubDate></item><item><title><![CDATA[Reply to Removing the keyring/lanyard loop. on Sat, 02 Apr 2022 21:41:24 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/storm" aria-label="Profile: Storm">@<bdi>Storm</bdi></a> <a href="/post/2280433">said</a>:<br />
Very nice job chap. I found opening the bottle opener on a cellidor model is handy as it makes the keyring tab sit up far enough you can get at it easier without damging the scales</p>
</blockquote>
<p dir="auto">That’s how I do it too.</p>
]]></description><link>https://multitool.ninja/post/2330517</link><guid isPermaLink="true">https://multitool.ninja/post/2330517</guid><dc:creator><![CDATA[Sawl Goodman]]></dc:creator><pubDate>Sat, 02 Apr 2022 21:41:24 GMT</pubDate></item><item><title><![CDATA[Reply to Removing the keyring/lanyard loop. on Sat, 02 Apr 2022 15:07:26 GMT]]></title><description><![CDATA[<p dir="auto">Nice work.  I filed the keyring off my Pioneer X, I did ok but I wish I had used your method.  I really wish Victorinox would make a keyring\laynard ring that would fold in like in the Leatherman Micra or Wave.  That way you could deploy it if you wanted it or not use it.</p>
]]></description><link>https://multitool.ninja/post/2330436</link><guid isPermaLink="true">https://multitool.ninja/post/2330436</guid><dc:creator><![CDATA[Steelej1976]]></dc:creator><pubDate>Sat, 02 Apr 2022 15:07:26 GMT</pubDate></item><item><title><![CDATA[Reply to Removing the keyring/lanyard loop. on Mon, 20 Sep 2021 12:06:28 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/pietervn" aria-label="Profile: pietervn">@<bdi>pietervn</bdi></a> <a href="/post/2281073">said</a>:<br />
I usually put blu tack / prestic in between the parts, then a few layers of masking tape. The blu tack usually captures all the shavings and very few if any gets into the knife itself. The first one I ever did was only masked off and the awl is still not quite factory snap. The subsequent Pioneer X got the blu tack treatment and all the tools snap as the day it left the factory.</p>
<p dir="auto">Pete</p>
</blockquote>
<p dir="auto">Humm.... Thank's a lot for the tip mate  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2281108</link><guid isPermaLink="true">https://multitool.ninja/post/2281108</guid><dc:creator><![CDATA[MacGyver]]></dc:creator><pubDate>Mon, 20 Sep 2021 12:06:28 GMT</pubDate></item><item><title><![CDATA[Reply to Removing the keyring/lanyard loop. on Mon, 20 Sep 2021 06:59:20 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/macgyver" aria-label="Profile: MacGyver">@<bdi>MacGyver</bdi></a> <a href="/post/2279841">said</a>:<br />
My major concern even more than the shielding itself was to tape off the area so no metal shavings would get in there, it takes forever to kleen them afterwards.</p>
</blockquote>
<p dir="auto">I usually put blu tack / prestic in between the parts, then a few layers of masking tape. The blu tack usually captures all the shavings and very few if any gets into the knife itself. The first one I ever did was only masked off and the awl is still not quite factory snap. The subsequent Pioneer X got the blu tack treatment and all the tools snap as the day it left the factory.</p>
<p dir="auto">Pete</p>
]]></description><link>https://multitool.ninja/post/2281073</link><guid isPermaLink="true">https://multitool.ninja/post/2281073</guid><dc:creator><![CDATA[pietervn]]></dc:creator><pubDate>Mon, 20 Sep 2021 06:59:20 GMT</pubDate></item><item><title><![CDATA[Reply to Removing the keyring/lanyard loop. on Sun, 19 Sep 2021 20:31:59 GMT]]></title><description><![CDATA[<p dir="auto">This is a great idea!  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> I don't have shim steel, but I imagine that a few layers of aluminum cut from a soda can would work almost as well.</p>
]]></description><link>https://multitool.ninja/post/2280978</link><guid isPermaLink="true">https://multitool.ninja/post/2280978</guid><dc:creator><![CDATA[hsherzfeld]]></dc:creator><pubDate>Sun, 19 Sep 2021 20:31:59 GMT</pubDate></item><item><title><![CDATA[Reply to Removing the keyring/lanyard loop. on Sat, 18 Sep 2021 17:09:35 GMT]]></title><description><![CDATA[<p dir="auto">But now the loop won't poke you in the hand.  See - you never thought of that did you?</p>
]]></description><link>https://multitool.ninja/post/2280658</link><guid isPermaLink="true">https://multitool.ninja/post/2280658</guid><dc:creator><![CDATA[powernoodle]]></dc:creator><pubDate>Sat, 18 Sep 2021 17:09:35 GMT</pubDate></item><item><title><![CDATA[Reply to Removing the keyring/lanyard loop. on Sat, 18 Sep 2021 13:11:42 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /> Very well done.</p>
]]></description><link>https://multitool.ninja/post/2280564</link><guid isPermaLink="true">https://multitool.ninja/post/2280564</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Sat, 18 Sep 2021 13:11:42 GMT</pubDate></item><item><title><![CDATA[Reply to Removing the keyring/lanyard loop. on Fri, 17 Sep 2021 21:18:27 GMT]]></title><description><![CDATA[<p dir="auto">Very nice job chap. I found opening the bottle opener on a cellidor model is handy as it makes the keyring tab sit up far enough you can get at it easier without damging the scales</p>
]]></description><link>https://multitool.ninja/post/2280433</link><guid isPermaLink="true">https://multitool.ninja/post/2280433</guid><dc:creator><![CDATA[Storm]]></dc:creator><pubDate>Fri, 17 Sep 2021 21:18:27 GMT</pubDate></item><item><title><![CDATA[Reply to Removing the keyring/lanyard loop. on Wed, 15 Sep 2021 16:10:56 GMT]]></title><description><![CDATA[<p dir="auto">At present time, all of my SAKs are (excepting added mini screwdrivers and straight pins) unmodified. This is a good tip for those who don't wish to have the split ring attachment point, though.</p>
<p dir="auto">"Smurf file" had me scratching my head. Was that UK terminology I hadn't heard before? Then I got to the end of the first post. I would have understood immediately if the filter substituted the word "illegitimate," but "smurf file" sounds a lot funnier.</p>
]]></description><link>https://multitool.ninja/post/2279934</link><guid isPermaLink="true">https://multitool.ninja/post/2279934</guid><dc:creator><![CDATA[Farmer X]]></dc:creator><pubDate>Wed, 15 Sep 2021 16:10:56 GMT</pubDate></item><item><title><![CDATA[Reply to Removing the keyring/lanyard loop. on Wed, 15 Sep 2021 14:08:13 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Rizio Il Ghiro <a href="/post/2279882">said</a>:<br />
Nice work, lemo! <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/agreesign.gif" alt=":iagree:" title="I agree" class="forum-smiley emoji" /></p>
<p dir="auto">Thanks for sharing this tip!</p>
]]></description><link>https://multitool.ninja/post/2279893</link><guid isPermaLink="true">https://multitool.ninja/post/2279893</guid><dc:creator><![CDATA[NutSAK]]></dc:creator><pubDate>Wed, 15 Sep 2021 14:08:13 GMT</pubDate></item><item><title><![CDATA[Reply to Removing the keyring/lanyard loop. on Wed, 15 Sep 2021 13:01:16 GMT]]></title><description><![CDATA[<p dir="auto">Nice work, lemo! <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2279882</link><guid isPermaLink="true">https://multitool.ninja/post/2279882</guid><dc:creator><![CDATA[Rizio Il Ghiro]]></dc:creator><pubDate>Wed, 15 Sep 2021 13:01:16 GMT</pubDate></item><item><title><![CDATA[Reply to Removing the keyring/lanyard loop. on Wed, 15 Sep 2021 10:50:01 GMT]]></title><description><![CDATA[<p dir="auto">Clean job  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /><br />
A thinner file also helps, I used the one on my ps4.<br />
Metal shims are a good idea though. The reusability factor is handy,  especially if you’re like me and file off the irksome nub of every SAK you come across.  &gt;:D</p>
]]></description><link>https://multitool.ninja/post/2279850</link><guid isPermaLink="true">https://multitool.ninja/post/2279850</guid><dc:creator><![CDATA[trichosirius]]></dc:creator><pubDate>Wed, 15 Sep 2021 10:50:01 GMT</pubDate></item><item><title><![CDATA[Reply to Removing the keyring/lanyard loop. on Wed, 15 Sep 2021 10:27:56 GMT]]></title><description><![CDATA[<p dir="auto">Great job  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /><br />
I did same to my Pioneer X, also shielded the area with thin steel.<br />
My major concern even more than the shielding itself was to tape off the area so no metal shavings would get in there, it takes forever to cleen them afterwards.<br />
The alox modeles, especially Pioners are 5ye hardest to grind the loop off. I usually cut the max i can with cuters then file the rest off.<br />
Yours look a lot better trust me...</p>
<p dir="auto"><img src="https://i.imgur.com/kJZ7UO0.jpeg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2279841</link><guid isPermaLink="true">https://multitool.ninja/post/2279841</guid><dc:creator><![CDATA[MacGyver]]></dc:creator><pubDate>Wed, 15 Sep 2021 10:27:56 GMT</pubDate></item><item><title><![CDATA[Reply to Removing the keyring/lanyard loop. on Wed, 15 Sep 2021 10:12:11 GMT]]></title><description><![CDATA[<p dir="auto">Well done, thanks for sharing the pics.</p>
<p dir="auto"><img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">What do you mean, "more patience and talent"?! Dude, most folks here just yank the damn thing apart with some pliers!</p>
<p dir="auto"><img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2279840</link><guid isPermaLink="true">https://multitool.ninja/post/2279840</guid><dc:creator><![CDATA[pfrsantos]]></dc:creator><pubDate>Wed, 15 Sep 2021 10:12:11 GMT</pubDate></item></channel></rss>