<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[kamakiri’s fix for the newer/short in-line Phillips]]></title><description><![CDATA[<p dir="auto">I felt I was missing some of the utility of the 1973+ style in-line Phillips regarding use in smaller screws toward the 1/0 range.  I was gonna tackle the shorter reach too, but I’ll do that later and that can easily be achieved by grinding off material toward the pivot. I remember in the past how the old Phillips surprised me many times with the way it could turn much smaller screws than I’d expect. Quite the opposite of my experiences with the all the newer versions.</p>
<p dir="auto">Only tools I used were files, and cutting was only done in the last 2mm maybe 3. The main difference can be seen in the reflection at the tip as shown in the first pic.</p>
<p dir="auto">Second pic adds the one on my ‘84 Champion and a 58mm combo for comparison. For reference, it just fits the screws on a Photon Microlite. Just barely, but that was my target. Some care is required in use and it’s not gonna turn screws on my glasses, but I’m going to do this to all my newer users and maybe try the same on backside Phillips too.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/528879_5039B4B7-9F06-47F8-91BD-9653EF1CCDCA.jpg" alt="5039B4B7-9F06-47F8-91BD-9653EF1CCDCA.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/528880_789936F7-0026-4031-9117-64F8DB8D9C0B.jpg" alt="789936F7-0026-4031-9117-64F8DB8D9C0B.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/topic/88650/kamakiris-fix-for-the-newershort-in-line-phillips</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 14:37:48 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/88650.rss" rel="self" type="application/rss+xml"/><pubDate>Sat, 01 Jan 2022 23:27:56 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to kamakiri’s fix for the newer/short in-line Phillips on Tue, 03 May 2022 13:29:48 GMT]]></title><description><![CDATA[<p dir="auto">Awesome, exactly what I was looking for.</p>
<p dir="auto">So basically, could you detail the different steps, please?</p>
<p dir="auto">I was going to make the tip more "pointy" but the angle of the tip has to be modified as well? Did you filed with a precise angle?</p>
]]></description><link>https://multitool.ninja/post/2338267</link><guid isPermaLink="true">https://multitool.ninja/post/2338267</guid><dc:creator><![CDATA[bismouth]]></dc:creator><pubDate>Tue, 03 May 2022 13:29:48 GMT</pubDate></item><item><title><![CDATA[Reply to kamakiri’s fix for the newer/short in-line Phillips on Thu, 03 Mar 2022 01:12:52 GMT]]></title><description><![CDATA[<p dir="auto">Bump.</p>
<p dir="auto">Modded the back side Phillips on a Troubleshooter. This one can turn 0/00 screws.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/531959_AF1B533D-6718-4D4B-B858-DA0F58BC1771.jpg" alt="AF1B533D-6718-4D4B-B858-DA0F58BC1771.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2322602</link><guid isPermaLink="true">https://multitool.ninja/post/2322602</guid><dc:creator><![CDATA[kamakiri]]></dc:creator><pubDate>Thu, 03 Mar 2022 01:12:52 GMT</pubDate></item><item><title><![CDATA[Reply to kamakiri’s fix for the newer/short in-line Phillips on Tue, 04 Jan 2022 05:43:17 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/lemonizer" aria-label="Profile: Lemonizer">@<bdi>Lemonizer</bdi></a> <a href="/post/2308358">said</a>:<br />
"Troublemaker", that's a fun name ! :P</p>
</blockquote>
<p dir="auto">Thanks! Unfortunately, the shoe fits.  :D At least it’s better than the next knife to receive the Phillips fix…the just finished Huntsman Lite-Lite:</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/528981_7EF1F7D5-5F31-42E1-B651-F91F6A29DA19.jpg" alt="7EF1F7D5-5F31-42E1-B651-F91F6A29DA19.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/528982_294C001B-F45C-48A5-AACC-6174DFBAEFB7.jpg" alt="294C001B-F45C-48A5-AACC-6174DFBAEFB7.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2308505</link><guid isPermaLink="true">https://multitool.ninja/post/2308505</guid><dc:creator><![CDATA[kamakiri]]></dc:creator><pubDate>Tue, 04 Jan 2022 05:43:17 GMT</pubDate></item><item><title><![CDATA[Reply to kamakiri’s fix for the newer/short in-line Phillips on Mon, 03 Jan 2022 19:24:26 GMT]]></title><description><![CDATA[<p dir="auto">"Troublemaker", that's a fun name ! :P</p>
]]></description><link>https://multitool.ninja/post/2308358</link><guid isPermaLink="true">https://multitool.ninja/post/2308358</guid><dc:creator><![CDATA[Lemonizer]]></dc:creator><pubDate>Mon, 03 Jan 2022 19:24:26 GMT</pubDate></item><item><title><![CDATA[Reply to kamakiri’s fix for the newer/short in-line Phillips on Mon, 03 Jan 2022 12:38:32 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2308278</link><guid isPermaLink="true">https://multitool.ninja/post/2308278</guid><dc:creator><![CDATA[Jackpine54]]></dc:creator><pubDate>Mon, 03 Jan 2022 12:38:32 GMT</pubDate></item><item><title><![CDATA[Reply to kamakiri’s fix for the newer/short in-line Phillips on Mon, 03 Jan 2022 05:24:15 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">Thanks!</p>
<p dir="auto">No pic, but also did the backside Phillips on the Troublemaker. Works a bit better than the in-line since it has a better/pointier tip to start with.</p>
<p dir="auto">Next one I do on an in-line, I’ll try it with a small burr on the Dremel. Just to see if that can work too, and perhaps work better.</p>
]]></description><link>https://multitool.ninja/post/2308242</link><guid isPermaLink="true">https://multitool.ninja/post/2308242</guid><dc:creator><![CDATA[kamakiri]]></dc:creator><pubDate>Mon, 03 Jan 2022 05:24:15 GMT</pubDate></item><item><title><![CDATA[Reply to kamakiri’s fix for the newer/short in-line Phillips on Sun, 02 Jan 2022 19:46:05 GMT]]></title><description><![CDATA[<p dir="auto">Really good job, bravo !  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">I usually pair my swisschamp with a minichamp, so I'm covered in the philips area !  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2308116</link><guid isPermaLink="true">https://multitool.ninja/post/2308116</guid><dc:creator><![CDATA[Lemonizer]]></dc:creator><pubDate>Sun, 02 Jan 2022 19:46:05 GMT</pubDate></item><item><title><![CDATA[Reply to kamakiri’s fix for the newer/short in-line Phillips on Sun, 02 Jan 2022 14:33:29 GMT]]></title><description><![CDATA[<p dir="auto">Nicely done! <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2308029</link><guid isPermaLink="true">https://multitool.ninja/post/2308029</guid><dc:creator><![CDATA[VICMAN]]></dc:creator><pubDate>Sun, 02 Jan 2022 14:33:29 GMT</pubDate></item><item><title><![CDATA[Reply to kamakiri’s fix for the newer/short in-line Phillips on Sun, 02 Jan 2022 06:38:24 GMT]]></title><description><![CDATA[<p dir="auto">Good job</p>
]]></description><link>https://multitool.ninja/post/2308003</link><guid isPermaLink="true">https://multitool.ninja/post/2308003</guid><dc:creator><![CDATA[Andetto]]></dc:creator><pubDate>Sun, 02 Jan 2022 06:38:24 GMT</pubDate></item><item><title><![CDATA[Reply to kamakiri’s fix for the newer/short in-line Phillips on Sun, 02 Jan 2022 02:36:50 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">Thanks everyone!  I remember others having similar comments and complaints about the new ones regarding this issue. So I thought it was worth sharing. It’s certainly not a proper substitute for the right sized tool, but it’ll do in a pinch as we so often ask of our SAKs.  :)</p>
]]></description><link>https://multitool.ninja/post/2307977</link><guid isPermaLink="true">https://multitool.ninja/post/2307977</guid><dc:creator><![CDATA[kamakiri]]></dc:creator><pubDate>Sun, 02 Jan 2022 02:36:50 GMT</pubDate></item><item><title><![CDATA[Reply to kamakiri’s fix for the newer/short in-line Phillips on Sun, 02 Jan 2022 01:17:34 GMT]]></title><description><![CDATA[<p dir="auto">Excellent result! I thought of doing this myself ages ago, but I didn't get a round tuit and forgot about it. I have knives with the old Philips that I use instead.</p>
]]></description><link>https://multitool.ninja/post/2307966</link><guid isPermaLink="true">https://multitool.ninja/post/2307966</guid><dc:creator><![CDATA[Sawl Goodman]]></dc:creator><pubDate>Sun, 02 Jan 2022 01:17:34 GMT</pubDate></item><item><title><![CDATA[Reply to kamakiri’s fix for the newer/short in-line Phillips on Sun, 02 Jan 2022 01:06:34 GMT]]></title><description><![CDATA[<p dir="auto">Nice job  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2307964</link><guid isPermaLink="true">https://multitool.ninja/post/2307964</guid><dc:creator><![CDATA[Storm]]></dc:creator><pubDate>Sun, 02 Jan 2022 01:06:34 GMT</pubDate></item><item><title><![CDATA[Reply to kamakiri’s fix for the newer/short in-line Phillips on Sun, 02 Jan 2022 00:11:46 GMT]]></title><description><![CDATA[<p dir="auto">Excellent!</p>
<p dir="auto">Sent from my SM-G991U using Tapatalk</p>
]]></description><link>https://multitool.ninja/post/2307949</link><guid isPermaLink="true">https://multitool.ninja/post/2307949</guid><dc:creator><![CDATA[GrouchoM]]></dc:creator><pubDate>Sun, 02 Jan 2022 00:11:46 GMT</pubDate></item><item><title><![CDATA[Reply to kamakiri’s fix for the newer/short in-line Phillips on Sat, 01 Jan 2022 23:47:11 GMT]]></title><description><![CDATA[<p dir="auto">Looks like you figured out a good solution!  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2307945</link><guid isPermaLink="true">https://multitool.ninja/post/2307945</guid><dc:creator><![CDATA[FolderBeholder]]></dc:creator><pubDate>Sat, 01 Jan 2022 23:47:11 GMT</pubDate></item></channel></rss>