<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Wave Interior Tool Mod]]></title><description><![CDATA[<p dir="auto">Finally got around to building a modern version of the original Wave.  I like the idea of having the awl and dedicated Phillips on a tool I can use outdoors without losing bits.</p>
<p dir="auto">Tools: can opener + Phillips and pry bar + awl + scissors.</p>
<p dir="auto">[attach id=0 msg=2447004]</p>
<p dir="auto">The issue: tools overlap with pliers stop bar.  The solution was to snap off the pliers stop.  But, there still isn’t enough clearance. I think it’s the rest of that piece causing the implements to sit too high.</p>
<p dir="auto">So, pliers won’t close.</p>
<p dir="auto">[attach id=1 msg=2447004]</p>
<p dir="auto">I think I need to file down the rest of that stop.  It should work.  The only other fit issue is the awl sitting on top on the scissors, so awl has to come out to get scissors.  Otherwise works great.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/560486_DEE3D0D6-EDA8-4F2E-8D38-1FC744094BE4.jpg" alt="DEE3D0D6-EDA8-4F2E-8D38-1FC744094BE4.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/560488_IMG_3494.jpg" alt="IMG_3494.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/560489_IMG_3500.jpg" alt="IMG_3500.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/topic/91577/wave-interior-tool-mod</link><generator>RSS for Node</generator><lastBuildDate>Tue, 17 Nov 2026 12:15:50 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/91577.rss" rel="self" type="application/rss+xml"/><pubDate>Sat, 04 Nov 2023 13:58:49 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Wave Interior Tool Mod on Sun, 05 Nov 2023 13:39:54 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/zoidberg" aria-label="Profile: zoidberg">@<bdi>zoidberg</bdi></a> <a href="/post/2447050">said</a>:<br />
It's been a while so I could be way off here.</p>
<p dir="auto">Pretty sure the Phillips is short enough to clear the Scissors handle so try swapping that over.<br />
If grinding down the rest of the plier stop doesn't work then option two is remove it completely.<br />
Remove the pliers, grab ends and lift up and out. Re peen the rivet for the inner tools lock spring.</p>
</blockquote>
<blockquote>
<p dir="auto">@Antti Lammi <a href="/post/2447061">said</a>:<br />
I know for sure that you can get phillips side go lower by bending little tab inside handle or just breaking it like in picture ( upper normal Wave and other is my modded Wave)<br />
<img src="https://uploads.tapatalk-cdn.com/20231104/41bffabd84e3910b7b413908175d2a13.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Otherside isnt so easy cause profile of awl prevents pliers go any deeper even if you cut that tab ( i have tried in both handles and same result) only way to make pliers and handle close properly is modding awl profile and if you want to close it like normal wave maybe also profiling phillips needed to vlose fully.<br />
<img src="https://uploads.tapatalk-cdn.com/20231104/4df8637fdc99ababb79ed93eb07af272.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Difference with our mods i didnt keep scissors but instead microbit driver.</p>
<p dir="auto">As you can see my wave dont close fully but its so small gap that i really dont care it even if it wont close properly causd i really do t wanna reprofile awl ( awful lot work for reprofiling it, cause need to make it by hand and not with tooös cause heat treat might go wrong)</p>
<p dir="auto"><img src="https://uploads.tapatalk-cdn.com/20231104/72cf4ff1658761a50ef249265af73570.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Only Tools Matters</p>
</blockquote>
<p dir="auto">Thanks, Zoidberg and Anti Lammi.  These are helpful suggestions. I will try some further modification.</p>
<p dir="auto">Fully closing the pliers would be ideal but also doesn’t render the tool unusable.</p>
]]></description><link>https://multitool.ninja/post/2447162</link><guid isPermaLink="true">https://multitool.ninja/post/2447162</guid><dc:creator><![CDATA[Grand_Banana]]></dc:creator><pubDate>Sun, 05 Nov 2023 13:39:54 GMT</pubDate></item><item><title><![CDATA[Reply to Wave Interior Tool Mod on Sun, 05 Nov 2023 10:34:26 GMT]]></title><description><![CDATA[<p dir="auto">Oops, nothing to add to this thread.  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2447140</link><guid isPermaLink="true">https://multitool.ninja/post/2447140</guid><dc:creator><![CDATA[Fireman]]></dc:creator><pubDate>Sun, 05 Nov 2023 10:34:26 GMT</pubDate></item><item><title><![CDATA[Reply to Wave Interior Tool Mod on Sat, 04 Nov 2023 19:58:26 GMT]]></title><description><![CDATA[<p dir="auto">I know for sure that you can get phillips side go lower by bending little tab inside handle or just breaking it like in picture ( upper normal Wave and other is my modded Wave)<br />
<img src="https://uploads.tapatalk-cdn.com/20231104/41bffabd84e3910b7b413908175d2a13.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Otherside isnt so easy cause profile of awl prevents pliers go any deeper even if you cut that tab ( i have tried in both handles and same result) only way to make pliers and handle close properly is modding awl profile and if you want to close it like normal wave maybe also profiling phillips needed to vlose fully.<br />
<img src="https://uploads.tapatalk-cdn.com/20231104/4df8637fdc99ababb79ed93eb07af272.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Difference with our mods i didnt keep scissors but instead microbit driver.</p>
<p dir="auto">As you can see my wave dont close fully but its so small gap that i really dont care it even if it wont close properly causd i really do t wanna reprofile awl ( awful lot work for reprofiling it, cause need to make it by hand and not with tooös cause heat treat might go wrong)</p>
<p dir="auto"><img src="https://uploads.tapatalk-cdn.com/20231104/72cf4ff1658761a50ef249265af73570.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Only Tools Matters</p>
]]></description><link>https://multitool.ninja/post/2447061</link><guid isPermaLink="true">https://multitool.ninja/post/2447061</guid><dc:creator><![CDATA[Antti Lammi]]></dc:creator><pubDate>Sat, 04 Nov 2023 19:58:26 GMT</pubDate></item><item><title><![CDATA[Reply to Wave Interior Tool Mod on Sat, 04 Nov 2023 19:23:16 GMT]]></title><description><![CDATA[<p dir="auto">It's been a while so I could be way off here.</p>
<p dir="auto">Pretty sure the Phillips is short enough to clear the Scissors handle so try swapping that over.<br />
If grinding down the rest of the plier stop doesn't work then option two is remove it completely.<br />
Remove the pliers, grab ends and lift up and out. Re peen the rivet for the inner tools lock spring.</p>
]]></description><link>https://multitool.ninja/post/2447050</link><guid isPermaLink="true">https://multitool.ninja/post/2447050</guid><dc:creator><![CDATA[zoidberg]]></dc:creator><pubDate>Sat, 04 Nov 2023 19:23:16 GMT</pubDate></item></channel></rss>