<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Fishing knife mod]]></title><description><![CDATA[<p dir="auto">This is an attempt at the hacker badge. This mod had been in my mind for a while, and it has evolved from a bladeless tool, 4 layer, 3 layer, 2 layer, and back to a 3 layer. I wanted to try scales that have the pins all the way through, and a hidden 4th pin. I have some parts on order so this may take a few weeks to complete, but  I will go one step at a time.<br />
It all started with an old downed tree hanging in my bamboo grove.<br />
[attach id=1 msg=2463957]<br />
[attach id=0 msg=2463957]<br />
[attach id=2 msg=2463957]<br />
After the raw blanks were had I sanded the inside face of them.</p>
<p dir="auto">[attach id=3 msg=2463957]</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564563_IMG_6063-compressed.jpg" alt="IMG_6063-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564564_IMG_6064-compressed.jpg" alt="IMG_6064-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564565_IMG_6065-compressed.jpg" alt="IMG_6065-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564566_IMG_6066-compressed.jpg" alt="IMG_6066-compressed.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/topic/91989/fishing-knife-mod</link><generator>RSS for Node</generator><lastBuildDate>Wed, 18 Nov 2026 20:27:32 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/91989.rss" rel="self" type="application/rss+xml"/><pubDate>Sat, 10 Feb 2024 23:59:05 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Fishing knife mod on Mon, 08 Apr 2024 12:57:27 GMT]]></title><description><![CDATA[<p dir="auto">Thanks Adam. It has ended up being a very useful SAK  around the house as well as its intended purpose.</p>
]]></description><link>https://multitool.ninja/post/2472912</link><guid isPermaLink="true">https://multitool.ninja/post/2472912</guid><dc:creator><![CDATA[Enginears]]></dc:creator><pubDate>Mon, 08 Apr 2024 12:57:27 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Sun, 07 Apr 2024 23:53:37 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/enginears" aria-label="Profile: Enginears">@<bdi>Enginears</bdi></a> <a href="/post/2464823">said</a>:<br />
[attach id=0 msg=2464823]  [attach id=1 msg=2464823]</p>
<p dir="auto">Truth be told I am a pretty crappy fisherman, and mostly end up goofing around on kayaks and boats. But this is the intended use, clip it to your vest or PFD and have the pliers or hook tool deployed and at hand.<br />
[attach id=2 msg=2464823]</p>
</blockquote>
<p dir="auto">That turned out sweet!  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2472853</link><guid isPermaLink="true">https://multitool.ninja/post/2472853</guid><dc:creator><![CDATA[Adam5]]></dc:creator><pubDate>Sun, 07 Apr 2024 23:53:37 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Mon, 19 Feb 2024 23:55:03 GMT]]></title><description><![CDATA[<p dir="auto">Beautiful.<br />
Outstanding job.</p>
]]></description><link>https://multitool.ninja/post/2465328</link><guid isPermaLink="true">https://multitool.ninja/post/2465328</guid><dc:creator><![CDATA[PitCarver]]></dc:creator><pubDate>Mon, 19 Feb 2024 23:55:03 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Mon, 19 Feb 2024 22:27:51 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Juan el Boricua <a href="/post/2465245">said</a>:<br />
Kudos to you, Enginears, on such a wonderful job! Your craftsmanship is exceptional (and to think it was down with hand tools!) and makes it look like an heirloom. Thank you for sharing the process and  not just the final product. BTW, did you tried heating up ("annealing")  the wire before flattening or drilling?</p>
</blockquote>
<p dir="auto">Hey Juan thank you for the kindness. You know in retrospect I should have tried annealing before giving up…. I have a Barlow styled mod in the works and may try the brass bail again. Thanks for the idea.</p>
]]></description><link>https://multitool.ninja/post/2465308</link><guid isPermaLink="true">https://multitool.ninja/post/2465308</guid><dc:creator><![CDATA[Enginears]]></dc:creator><pubDate>Mon, 19 Feb 2024 22:27:51 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Mon, 19 Feb 2024 14:08:35 GMT]]></title><description><![CDATA[<p dir="auto">Kudos to you, Enginears, on such a wonderful job! Your craftsmanship is exceptional (and to think it was down with hand tools!) and makes it look like an heirloom. Thank you for sharing the process and  not just the final product. BTW, did you tried heating up ("annealing")  the wire before flattening or drilling?</p>
]]></description><link>https://multitool.ninja/post/2465245</link><guid isPermaLink="true">https://multitool.ninja/post/2465245</guid><dc:creator><![CDATA[Juan el Boricua]]></dc:creator><pubDate>Mon, 19 Feb 2024 14:08:35 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Sat, 17 Feb 2024 01:51:21 GMT]]></title><description><![CDATA[<p dir="auto">Hey thanks for the kind words guys.</p>
<p dir="auto">I think the issue was mostly the small diameter. When I would flatten it, cracks were happening. A few times I got it flat and solid and then small pieces were cracking off during/after drilling. I tell you what though, the mock up looked sweet, I will be sourcing some bigger brass stock.</p>
]]></description><link>https://multitool.ninja/post/2464881</link><guid isPermaLink="true">https://multitool.ninja/post/2464881</guid><dc:creator><![CDATA[Enginears]]></dc:creator><pubDate>Sat, 17 Feb 2024 01:51:21 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Sat, 17 Feb 2024 00:05:31 GMT]]></title><description><![CDATA[<p dir="auto">I like that.  I may need to try my hand at that setup since we do like to fish.  What issues were you running into with the brass bail that you couldn't overcome?</p>
]]></description><link>https://multitool.ninja/post/2464868</link><guid isPermaLink="true">https://multitool.ninja/post/2464868</guid><dc:creator><![CDATA[AzteCypher]]></dc:creator><pubDate>Sat, 17 Feb 2024 00:05:31 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Fri, 16 Feb 2024 19:22:59 GMT]]></title><description><![CDATA[<p dir="auto">That has a very nice old timey look. I respect everyone working with wood and hand tools. Like the bail especially. Very nice indeed!</p>
]]></description><link>https://multitool.ninja/post/2464826</link><guid isPermaLink="true">https://multitool.ninja/post/2464826</guid><dc:creator><![CDATA[Blunt Object]]></dc:creator><pubDate>Fri, 16 Feb 2024 19:22:59 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Fri, 16 Feb 2024 19:19:51 GMT]]></title><description><![CDATA[<p dir="auto">Very impressive!  I love it!!! <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2464825</link><guid isPermaLink="true">https://multitool.ninja/post/2464825</guid><dc:creator><![CDATA[lazar]]></dc:creator><pubDate>Fri, 16 Feb 2024 19:19:51 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Fri, 16 Feb 2024 19:12:35 GMT]]></title><description><![CDATA[<p dir="auto">[attach id=0 msg=2464823]  [attach id=1 msg=2464823]</p>
<p dir="auto">Truth be told I am a pretty crappy fisherman, and mostly end up goofing around on kayaks and boats. But this is the intended use, clip it to your vest or PFD and have the pliers or hook tool deployed and at hand.<br />
[attach id=2 msg=2464823]</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564779_IMG_6190-compressed.jpg" alt="IMG_6190-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564780_IMG_6189-compressed.jpg" alt="IMG_6189-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564781_IMG_6191-compressed.jpg" alt="IMG_6191-compressed.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2464823</link><guid isPermaLink="true">https://multitool.ninja/post/2464823</guid><dc:creator><![CDATA[Enginears]]></dc:creator><pubDate>Fri, 16 Feb 2024 19:12:35 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Fri, 16 Feb 2024 19:09:56 GMT]]></title><description><![CDATA[<p dir="auto">So nothing is ever perfect. I tried to make a brass bail and went through 4 before admitting it was not going to work with what I had.  I decided to go with steel after all.  [attach id=0 msg=2464822]</p>
<p dir="auto">So I made the bail, peened everything and then sanded down the outside one last time with 180, 200, and 1000 grit paper. The tools all have a great snap, and no play. This is the first 91mm knife I have done where the scales are peened onto the liners, I will definitely be interested to do more.<br />
Here it is after a touch of wax and oil.<br />
[attach id=1 msg=2464822]  [attach id=2 msg=2464822]</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564776_IMG_6198-compressed.jpg" alt="IMG_6198-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564777_IMG_6186-compressed.jpg" alt="IMG_6186-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564778_IMG_6187-compressed.jpg" alt="IMG_6187-compressed.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2464822</link><guid isPermaLink="true">https://multitool.ninja/post/2464822</guid><dc:creator><![CDATA[Enginears]]></dc:creator><pubDate>Fri, 16 Feb 2024 19:09:56 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Fri, 16 Feb 2024 11:12:01 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/enginears" aria-label="Profile: Enginears">@<bdi>Enginears</bdi></a> <a href="/post/2464694">said</a>:<br />
Next step was to peen the 4th pin.<br />
[attach id=0 msg=2464694]<br />
And then do the first dry fit of the scales.<br />
[attach id=1 msg=2464694]<br />
The scales were way to thick so I sanded them down closer to a standard scale and then glued them to the outer liners. I am not sure if this is really needed but I have seen it done and figured it would make the overall package tighter and prevent water from getting behind the wood.  [attach id=2 msg=2464694]</p>
<p dir="auto">As the glue dried I did some experimenting with wax, flames and pondered what treatment I would give the actual scales.  [attach id=3 msg=2464694]</p>
</blockquote>
<p dir="auto">Looking good!  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2464756</link><guid isPermaLink="true">https://multitool.ninja/post/2464756</guid><dc:creator><![CDATA[lazar]]></dc:creator><pubDate>Fri, 16 Feb 2024 11:12:01 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Fri, 16 Feb 2024 00:57:02 GMT]]></title><description><![CDATA[<p dir="auto">Next step was to peen the 4th pin.<br />
[attach id=0 msg=2464694]<br />
And then do the first dry fit of the scales.<br />
[attach id=1 msg=2464694]<br />
The scales were way to thick so I sanded them down closer to a standard scale and then glued them to the outer liners. I am not sure if this is really needed but I have seen it done and figured it would make the overall package tighter and prevent water from getting behind the wood.  [attach id=2 msg=2464694]</p>
<p dir="auto">As the glue dried I did some experimenting with wax, flames and pondered what treatment I would give the actual scales.  [attach id=3 msg=2464694]</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564756_IMG_6168-compressed.jpg" alt="IMG_6168-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564757_IMG_6169-compressed.jpg" alt="IMG_6169-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564758_IMG_6170-compressed.jpg" alt="IMG_6170-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564759_IMG_6172-compressed.jpg" alt="IMG_6172-compressed.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2464694</link><guid isPermaLink="true">https://multitool.ninja/post/2464694</guid><dc:creator><![CDATA[Enginears]]></dc:creator><pubDate>Fri, 16 Feb 2024 00:57:02 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Fri, 16 Feb 2024 00:48:05 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/lazar" aria-label="Profile: lazar">@<bdi>lazar</bdi></a> <a href="/post/2464647">said</a>:<br />
Nice!  I haven't found a way to avoid the shavings, the hot water trick seems to help a little, but I still always get those tiny shavings.</p>
</blockquote>
<p dir="auto">Yeah this was with the hot water so I guess it's unavoidable to some degree.</p>
<p dir="auto">After disassembly this is what I had laid out.  [attach id=0 msg=2464693]<br />
I decided to build this one from the pliers out.<br />
[attach id=1 msg=2464693]</p>
<p dir="auto">And here is the first rough assembly.<br />
[attach id=2 msg=2464693]</p>
<p dir="auto">After that I did some additional grinding on my “combo tool - flat head” to get it to lay a little lower.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564753_FullSizeRender-compressed.jpg" alt="FullSizeRender-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564754_IMG_6165-compressed.jpg" alt="IMG_6165-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564755_IMG_6166-compressed.jpg" alt="IMG_6166-compressed.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2464693</link><guid isPermaLink="true">https://multitool.ninja/post/2464693</guid><dc:creator><![CDATA[Enginears]]></dc:creator><pubDate>Fri, 16 Feb 2024 00:48:05 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Thu, 15 Feb 2024 19:18:42 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/enginears" aria-label="Profile: Enginears">@<bdi>Enginears</bdi></a> <a href="/post/2464642">said</a>:<br />
One of the many perks of working at home - Some SAK modding during lunch break.<br />
Popping scales, I guess I still was not careful enough and have tiny shavings from 5/6 holes.<br />
[attach id=0 msg=2464642]</p>
<p dir="auto">Drilling one went better than ever. Will be doing the next after work.<br />
[attach id=1 msg=2464642]</p>
</blockquote>
<p dir="auto">Nice!  I haven't found a way to avoid the shavings, the hot water trick seems to help a little, but I still always get those tiny shavings.</p>
]]></description><link>https://multitool.ninja/post/2464647</link><guid isPermaLink="true">https://multitool.ninja/post/2464647</guid><dc:creator><![CDATA[lazar]]></dc:creator><pubDate>Thu, 15 Feb 2024 19:18:42 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Thu, 15 Feb 2024 18:51:44 GMT]]></title><description><![CDATA[<p dir="auto">One of the many perks of working at home - Some SAK modding during lunch break.<br />
Popping scales, I guess I still was not careful enough and have tiny shavings from 5/6 holes.<br />
[attach id=0 msg=2464642]</p>
<p dir="auto">Drilling one went better than ever. Will be doing the next after work.<br />
[attach id=1 msg=2464642]</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564738_IMG_6156-compressed.jpg" alt="IMG_6156-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564739_FullSizeRender-compressed.jpg" alt="FullSizeRender-compressed.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2464642</link><guid isPermaLink="true">https://multitool.ninja/post/2464642</guid><dc:creator><![CDATA[Enginears]]></dc:creator><pubDate>Thu, 15 Feb 2024 18:51:44 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Mon, 12 Feb 2024 15:40:26 GMT]]></title><description><![CDATA[<p dir="auto">I am impatiently waiting for the materials to show up in the mail. So here are a few inspiration shots that I have found. None are saks, but I think I want a bail, and perhaps two little lines.  [attach id=0 msg=2464217]  [attach id=1 msg=2464217]  [attach id=2 msg=2464217]</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564624_FullSizeRender-compressed.jpg" alt="FullSizeRender-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564625_FullSizeRender(2)-compressed.jpg" alt="FullSizeRender(2)-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564626_FullSizeRender(1)-compressed.jpg" alt="FullSizeRender(1)-compressed.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2464217</link><guid isPermaLink="true">https://multitool.ninja/post/2464217</guid><dc:creator><![CDATA[Enginears]]></dc:creator><pubDate>Mon, 12 Feb 2024 15:40:26 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Sun, 11 Feb 2024 19:57:02 GMT]]></title><description><![CDATA[<p dir="auto">I'll be watching.<br />
For sure.</p>
]]></description><link>https://multitool.ninja/post/2464111</link><guid isPermaLink="true">https://multitool.ninja/post/2464111</guid><dc:creator><![CDATA[PitCarver]]></dc:creator><pubDate>Sun, 11 Feb 2024 19:57:02 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Sun, 11 Feb 2024 00:21:02 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/lazar" aria-label="Profile: lazar">@<bdi>lazar</bdi></a> <a href="/post/2463961">said</a>:<br />
Looking good!  Can't wait to see it finished.</p>
</blockquote>
<p dir="auto">Stay tuned my friend! I wish the champ were here so I could keep working into the night, but being paced will probably work to my advantage.</p>
]]></description><link>https://multitool.ninja/post/2463964</link><guid isPermaLink="true">https://multitool.ninja/post/2463964</guid><dc:creator><![CDATA[Enginears]]></dc:creator><pubDate>Sun, 11 Feb 2024 00:21:02 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Sun, 11 Feb 2024 00:18:54 GMT]]></title><description><![CDATA[<p dir="auto">The cutout went pretty well.  [attach id=0 msg=2463962]<br />
[attach id=1 msg=2463962]<br />
And then I added a depression to accommodate tue 4th pin head. [attach id=2 msg=2463962]</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564571_IMG_6074-compressed.jpg" alt="IMG_6074-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564572_IMG_6075-compressed.jpg" alt="IMG_6075-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564573_IMG_6076-compressed.jpg" alt="IMG_6076-compressed.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2463962</link><guid isPermaLink="true">https://multitool.ninja/post/2463962</guid><dc:creator><![CDATA[Enginears]]></dc:creator><pubDate>Sun, 11 Feb 2024 00:18:54 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Sun, 11 Feb 2024 00:17:48 GMT]]></title><description><![CDATA[<p dir="auto">Looking good!  Can't wait to see it finished.</p>
]]></description><link>https://multitool.ninja/post/2463961</link><guid isPermaLink="true">https://multitool.ninja/post/2463961</guid><dc:creator><![CDATA[lazar]]></dc:creator><pubDate>Sun, 11 Feb 2024 00:17:48 GMT</pubDate></item><item><title><![CDATA[Reply to Fishing knife mod on Sun, 11 Feb 2024 00:08:03 GMT]]></title><description><![CDATA[<p dir="auto">From there I used a liner as a guide and took to the rasp to the blanks to get the outer shape.  [attach id=0 msg=2463960]  [attach id=1 msg=2463960]<br />
[attach id=2 msg=2463960]<br />
After the outer shape was done I went about the back tool cutout.  [attach id=3 msg=2463960]</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564567_IMG_6068-compressed.jpg" alt="IMG_6068-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564568_IMG_6069-compressed.jpg" alt="IMG_6069-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564569_IMG_6070-compressed.jpg" alt="IMG_6070-compressed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/564570_IMG_6073-compressed.jpg" alt="IMG_6073-compressed.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2463960</link><guid isPermaLink="true">https://multitool.ninja/post/2463960</guid><dc:creator><![CDATA[Enginears]]></dc:creator><pubDate>Sun, 11 Feb 2024 00:08:03 GMT</pubDate></item></channel></rss>