<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Custom 91mm Tension Problems]]></title><description><![CDATA[<p dir="auto">Hello,</p>
<p dir="auto">I modded some random implements from other disassembled tools (reused the correct liners and back springs) but I didn’t use brass rods to “re-assemble”. Against everyone’s advice, I wanted to make it easily changeable, so I used M2 screws instead. I chose M2 just so I wouldn’t have to ream out the implements, liners and back springs out of laziness. I have the tool assembled now and my clearances look ok, all the tools open and close (slightly variable between layers). Could the extra slop from the 2.5mm holes vs the 2mm screw be causing my headache? Is there something else I’m totally missing?</p>
<p dir="auto">Thank you,</p>
]]></description><link>https://multitool.ninja/topic/92853/custom-91mm-tension-problems</link><generator>RSS for Node</generator><lastBuildDate>Fri, 20 Nov 2026 00:08:48 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/92853.rss" rel="self" type="application/rss+xml"/><pubDate>Thu, 15 Aug 2024 23:18:02 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Custom 91mm Tension Problems on Sat, 17 Aug 2024 19:52:14 GMT]]></title><description><![CDATA[<p dir="auto">In my experience slop on one pivot is usually passable, like putting a 93mm awl in place of the small blade. But as others have said the middle pins are pretty touchy and can easily kill the overall tension of the spring.</p>
]]></description><link>https://multitool.ninja/post/2493045</link><guid isPermaLink="true">https://multitool.ninja/post/2493045</guid><dc:creator><![CDATA[Enginears]]></dc:creator><pubDate>Sat, 17 Aug 2024 19:52:14 GMT</pubDate></item><item><title><![CDATA[Reply to Custom 91mm Tension Problems on Sat, 17 Aug 2024 00:52:35 GMT]]></title><description><![CDATA[<p dir="auto">Thanks everyone! I read somewhere that if the whole in the liner was too large it could cause tension issues. Getting M3 screws as pivots is the next step, to at least check that variable.</p>
<p dir="auto">Thank you!</p>
]]></description><link>https://multitool.ninja/post/2492941</link><guid isPermaLink="true">https://multitool.ninja/post/2492941</guid><dc:creator><![CDATA[sbailey020]]></dc:creator><pubDate>Sat, 17 Aug 2024 00:52:35 GMT</pubDate></item><item><title><![CDATA[Reply to Custom 91mm Tension Problems on Fri, 16 Aug 2024 14:00:36 GMT]]></title><description><![CDATA[<p dir="auto">Yep they are pretty fussy on those things for spring tension unfortunately.</p>
]]></description><link>https://multitool.ninja/post/2492883</link><guid isPermaLink="true">https://multitool.ninja/post/2492883</guid><dc:creator><![CDATA[Helvetica Bold]]></dc:creator><pubDate>Fri, 16 Aug 2024 14:00:36 GMT</pubDate></item><item><title><![CDATA[Reply to Custom 91mm Tension Problems on Fri, 16 Aug 2024 13:05:32 GMT]]></title><description><![CDATA[<p dir="auto">0.5mm slop at each pivot and then 0.2mm slop for the middle pins would definitely causes issues with tension.  I've made liners before and messed up in drilling one of the holes by less than 0.5mm and it caused issues.</p>
]]></description><link>https://multitool.ninja/post/2492881</link><guid isPermaLink="true">https://multitool.ninja/post/2492881</guid><dc:creator><![CDATA[lazar]]></dc:creator><pubDate>Fri, 16 Aug 2024 13:05:32 GMT</pubDate></item><item><title><![CDATA[Reply to Custom 91mm Tension Problems on Fri, 16 Aug 2024 04:22:00 GMT]]></title><description><![CDATA[<p dir="auto">You didn't mention what problems specifically you were having but I'm thinking perhaps the tools are snapping open or closed.  If that's the case, I would say that little bit of slop is probably contributing to it.</p>
]]></description><link>https://multitool.ninja/post/2492861</link><guid isPermaLink="true">https://multitool.ninja/post/2492861</guid><dc:creator><![CDATA[AzteCypher]]></dc:creator><pubDate>Fri, 16 Aug 2024 04:22:00 GMT</pubDate></item></channel></rss>