<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[A "how-to" for basic SAK mods.  Pic heavy.]]></title><description><![CDATA[<p dir="auto">Here is a little “how-to” guide to a basic SAK mod on a 91mm cellidor knife, although most of the ideas are the same for other sizes as well.  I suspect ever modder has a slightly different way of doing things but this is the way that works for me with only a few basic tools, as can be seen in the first pic.</p>
<p dir="auto"><img src="http://i100.photobucket.com/albums/m37/gareth_hunt/DSCF3553.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">First thing to do is to pop off the scales from your donor knives.  I use an old SAK with a fairly blunt small blade and slip it under the scale.  Move it up to just behind the pin and pop the scale up.  Repeat for the other two pins.</p>
<p dir="auto"><img src="http://i100.photobucket.com/albums/m37/gareth_hunt/DSCF3555.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Next you are going to drill out the pins.  You can see here that I start with a centre mark on the pin head to act as a guide for the drill.  After taking the pic I realised the mark was a bit off and so did it again.</p>
<p dir="auto"><img src="http://i100.photobucket.com/albums/m37/gareth_hunt/DSCF3557.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Now all you need to do is drill out the pin.  I use a 2.5mm bit.  Take care not to drill too much and damage the bushes.  For the pin holding the back tools I do a very little drilling and then file the rest of the head off.  All you need do then is punch through the pins to release the tools and backsprings.  Remember and take note of which is the centre bush as it is smaller than the other two.</p>
<p dir="auto"><img src="http://i100.photobucket.com/albums/m37/gareth_hunt/DSCF3558.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Now you will have a pile of bits and there is no going back.  Take this opportunity to give all the tools, liners etc a good clean.  Most of the time a bit of a scrub with a scour pad will do the trick.</p>
<p dir="auto"><img src="http://i100.photobucket.com/albums/m37/gareth_hunt/DSCF3559.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">A quick shot here to show the new and old liners next to the blades.  On the new liner (top) you can see an indent that will sit next to the blade tang.  This is to compensate for the slimmer tang that can be seen on the newer blade next to it.  The most important thing you need to keep in mind is not to mix up old and new parts.  They won’t work and the blade will sit wrong in the finished knife, striking the top of the small blade.  Ask me how I know.  ::)</p>
<p dir="auto"><img src="http://i100.photobucket.com/albums/m37/gareth_hunt/DSCF3560.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The next thing I do is to prep up the new pins.  If you can get pin stock that is 2.5mm for the outside pins and 2.2mm for the centre ones (2.25mm is the Vic standard but I don’t think anyone has yet found a supplier).  I always give myself plenty of extra length to work with.  If you look at the pin sitting on the vice you can see the “peak” left after having cut it to size with a pair of snips.  You need to file this flat to give a nice even surface to work on.</p>
<p dir="auto"><img src="http://i100.photobucket.com/albums/m37/gareth_hunt/DSCF3563.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Take a small hammer and peen over the edge to give a nice, flattened, mushroom shaped top.  Repeat the filing and peening for all four pins.  The last part is to lightly file the other ends of the pins to a slight point.  This will help in getting the tools and liners to slip over the ends.</p>
<p dir="auto"><img src="http://i100.photobucket.com/albums/m37/gareth_hunt/DSCF3567.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">You can now put the bushings on the peened end of the pins (make sure the bushes are sitting the right way up) and put them through the full liner.  I always start from the opener side and work up to the blades.  This lets the SAK sit flat without rocking on the corkscrew that sits out quite a bit.  You can also keep a made up SAK near to hand as a reference, just to make sure you are putting things in the right place.</p>
<p dir="auto"><img src="http://i100.photobucket.com/albums/m37/gareth_hunt/DSCF3568.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">As I don’t use a jig of any kind you will almost inevitably come across the problem of getting the tool to sit well with the spring.  Don’t worry; get all but one of the tools sitting where they should be.  One of the tools will end up sitting like the saw below, that's OK just drop on the next liner.</p>
<p dir="auto"><img src="http://i100.photobucket.com/albums/m37/gareth_hunt/DSCF3570.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I have had to do the next bit with two pics, simply because I don’t have an extra hand to hold the camera.  Hold everything together with one hand as seen in the first pic.  You can see the tool sitting beside the spring instead of on top of it.</p>
<p dir="auto"><img src="http://i100.photobucket.com/albums/m37/gareth_hunt/DSCF3572.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">With the other hand put a fine screwdriver or similar between the pin and the spring.  Leaver the spring away from the pin and keep strong pressure on with the other hand.  When you remove the screwdriver everything should pop into place.  Repeat this for all the layers.  You may find this tricky at first but with just a little practice this takes no time at all.</p>
<p dir="auto"><img src="http://i100.photobucket.com/albums/m37/gareth_hunt/DSCF3574.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">We are now on the home straight.  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f642.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--slightly_smiling_face" style="height:1.4em;width:auto;vertical-align:middle" title=":)" alt="🙂" />  When you have the blade layer in place (don’t forget the spacer next to the small blade), along with the last liner, we need to look at the final peening.  Drop the bushes onto the pins.  You will now need to cut the pins to length.  Try not to make the pin to long, you only need 1-1.5mm to work with.  Once cut you will have the same nasty tool marks as you did when prepping the pin.  As before you will need to file the top flat for a good surface to work on.  Once you have it ready then give it a couple of strong taps while holding the SAK on a flat metal surface.  I use one of the flats on my vice as an improvised anvil.  Use the ball-peen to help work the edges of the pin out to fill the bushing.  You can see the three stages here: the far right pin has just been cut, the one next to it has been filed and the one on the far left has mostly been peened.</p>
<p dir="auto"><img src="http://i100.photobucket.com/albums/m37/gareth_hunt/DSCF3576.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The MOST important thing is not to over do it.  Keep checking the tools for any side play, once it has gone stop hitting the pin!  If you still have any metal sitting proud of the bushing then file it down (the scales won’t go on it you have to much there).  Once you have cut, filed and peened all the pins give the tools a last check over for any play and pop the scales on.  Job done, you are now the proud owner of your first mod.</p>
<p dir="auto">As I said at the start there are certainly other ways of doing this.  This way works for me, but if I have made any glaring errors (either in the modding or the writing) please jump in and say so.   Thanks for reading.  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/topic/9808/a-how-to-for-basic-sak-mods-pic-heavy</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 00:31:37 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/9808.rss" rel="self" type="application/rss+xml"/><pubDate>Wed, 11 Mar 2009 14:28:06 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Thu, 17 Oct 2019 15:28:07 GMT]]></title><description><![CDATA[<p dir="auto">I am also not able to see the pictures?</p>
]]></description><link>https://multitool.ninja/post/2030045</link><guid isPermaLink="true">https://multitool.ninja/post/2030045</guid><dc:creator><![CDATA[Woodwrecker]]></dc:creator><pubDate>Thu, 17 Oct 2019 15:28:07 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Mon, 12 Nov 2018 08:05:05 GMT]]></title><description><![CDATA[<p dir="auto">Photobucket broke the internet. <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f61e.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--disappointed" style="height:1.4em;width:auto;vertical-align:middle" title=":(" alt="😞" /></p>
]]></description><link>https://multitool.ninja/post/1806941</link><guid isPermaLink="true">https://multitool.ninja/post/1806941</guid><dc:creator><![CDATA[hiraethus]]></dc:creator><pubDate>Mon, 12 Nov 2018 08:05:05 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Mon, 12 Nov 2018 08:02:28 GMT]]></title><description><![CDATA[<p dir="auto">Is it just me or I can't seem to get the pictures to load  :-[</p>
]]></description><link>https://multitool.ninja/post/1806940</link><guid isPermaLink="true">https://multitool.ninja/post/1806940</guid><dc:creator><![CDATA[Pauliachi]]></dc:creator><pubDate>Mon, 12 Nov 2018 08:02:28 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Mon, 21 May 2018 16:19:38 GMT]]></title><description><![CDATA[<p dir="auto">That sounds right to me.</p>
]]></description><link>https://multitool.ninja/post/1700463</link><guid isPermaLink="true">https://multitool.ninja/post/1700463</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Mon, 21 May 2018 16:19:38 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Mon, 21 May 2018 15:10:39 GMT]]></title><description><![CDATA[<p dir="auto">All 2.5 mm, apparently.</p>
]]></description><link>https://multitool.ninja/post/1700446</link><guid isPermaLink="true">https://multitool.ninja/post/1700446</guid><dc:creator><![CDATA[hiraethus]]></dc:creator><pubDate>Mon, 21 May 2018 15:10:39 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Mon, 21 May 2018 15:07:50 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/bingofuel" aria-label="Profile: bingofuel">@<bdi>bingofuel</bdi></a> <a href="/post/181405">said</a>:<br />
Very cool, this makes it so much easier than reading 10 different threads covering 10 different aspects of modding.  I may even give this a go sometime soon.  If I may make a suggestion, can you please clarify the pin diameters for each frame size, just so there's no confusion? e.g.</p>
<p dir="auto">91mm: 2.5mm outer, 2.2mm (2.25) center<br />
84mm: ?<br />
74mm: ?<br />
58mm: ?</p>
</blockquote>
<p dir="auto">What about sizes for Wenger 85mm knives?</p>
<p dir="auto">Charles.</p>
]]></description><link>https://multitool.ninja/post/1700445</link><guid isPermaLink="true">https://multitool.ninja/post/1700445</guid><dc:creator><![CDATA[ChopperCharles]]></dc:creator><pubDate>Mon, 21 May 2018 15:07:50 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Sun, 04 Feb 2018 08:27:25 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Pablo O'Brien <a href="/post/1629596">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gareth" aria-label="Profile: Gareth">@<bdi>Gareth</bdi></a> <a href="/post/1629313">said</a>:</p>
<blockquote>
<p dir="auto">Thank-you. <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
<p dir="auto">However you did make me look to see when I first wrote this and I suddenly feel a lot older than I did five minutes ago.  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f615.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--confused" style="height:1.4em;width:auto;vertical-align:middle" title=":-\" alt="😕" /></p>
<p dir="auto"><img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f609.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--wink" style="height:1.4em;width:auto;vertical-align:middle" title=";)" alt="😉" /></p>
</blockquote>
<p dir="auto">Near enough to 10 years ago, huh?  <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Near enough perhaps but, very importantly, not ACTUALLY tens years yet.  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f61b.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--stuck_out_tongue" style="height:1.4em;width:auto;vertical-align:middle" title=":P" alt="😛" /></p>
]]></description><link>https://multitool.ninja/post/1629777</link><guid isPermaLink="true">https://multitool.ninja/post/1629777</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Sun, 04 Feb 2018 08:27:25 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Sat, 03 Feb 2018 23:20:50 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gareth" aria-label="Profile: Gareth">@<bdi>Gareth</bdi></a> <a href="/post/1629313">said</a>:<br />
Thank-you. <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
<p dir="auto">However you did make me look to see when I first wrote this and I suddenly feel a lot older than I did five minutes ago.  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f615.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--confused" style="height:1.4em;width:auto;vertical-align:middle" title=":-\" alt="😕" /></p>
<p dir="auto"><img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f609.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--wink" style="height:1.4em;width:auto;vertical-align:middle" title=";)" alt="😉" /></p>
</blockquote>
<p dir="auto">Near enough to 10 years ago, huh?  <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1629596</link><guid isPermaLink="true">https://multitool.ninja/post/1629596</guid><dc:creator><![CDATA[Don Pablo]]></dc:creator><pubDate>Sat, 03 Feb 2018 23:20:50 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Sat, 03 Feb 2018 22:53:28 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nikdanger" aria-label="Profile: nikdanger">@<bdi>nikdanger</bdi></a> <a href="/post/1629129">said</a>:<br />
How about deleting the brass pins/bushings and using M2 X10mm panhead screws with corresponding nuts to put my SAK back together?<br />
Anyone try this? <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">People have. The scales clip nicely onto the bushings.   <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f937.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--shrug" style="height:1.4em;width:auto;vertical-align:middle" title=":shrug:" alt="🤷" />   Welcome to the boards nik.   <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1629584</link><guid isPermaLink="true">https://multitool.ninja/post/1629584</guid><dc:creator><![CDATA[zoidberg]]></dc:creator><pubDate>Sat, 03 Feb 2018 22:53:28 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Sat, 03 Feb 2018 17:36:29 GMT]]></title><description><![CDATA[<p dir="auto">Thank-you. <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
<p dir="auto">However you did make me look to see when I first wrote this and I suddenly feel a lot older than I did five minutes ago.  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f615.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--confused" style="height:1.4em;width:auto;vertical-align:middle" title=":-\" alt="😕" /></p>
<p dir="auto"><img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f609.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--wink" style="height:1.4em;width:auto;vertical-align:middle" title=";)" alt="😉" /></p>
]]></description><link>https://multitool.ninja/post/1629313</link><guid isPermaLink="true">https://multitool.ninja/post/1629313</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Sat, 03 Feb 2018 17:36:29 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Sat, 03 Feb 2018 14:22:26 GMT]]></title><description><![CDATA[<p dir="auto">That's a very nice how to for sak write up<br />
Very well explained and good photos  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1629160</link><guid isPermaLink="true">https://multitool.ninja/post/1629160</guid><dc:creator><![CDATA[Wspeed]]></dc:creator><pubDate>Sat, 03 Feb 2018 14:22:26 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Sat, 03 Feb 2018 13:43:15 GMT]]></title><description><![CDATA[<p dir="auto">How about deleting the brass pins/bushings and using M2 X10mm panhead screws with corresponding nuts to put my SAK back together?<br />
Anyone try this? <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1629129</link><guid isPermaLink="true">https://multitool.ninja/post/1629129</guid><dc:creator><![CDATA[nikdanger]]></dc:creator><pubDate>Sat, 03 Feb 2018 13:43:15 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Thu, 18 Jan 2018 18:56:32 GMT]]></title><description><![CDATA[<p dir="auto">I use 100-200 grit mainly for smoothening and a metal file for thinning. I'd say that you need to be more aggressive on the rod thingys.  <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /><br />
And yes, I spin them on the drill.<br />
Good luck.  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1619561</link><guid isPermaLink="true">https://multitool.ninja/post/1619561</guid><dc:creator><![CDATA[Don Pablo]]></dc:creator><pubDate>Thu, 18 Jan 2018 18:56:32 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Thu, 18 Jan 2018 18:47:23 GMT]]></title><description><![CDATA[<p dir="auto">Stupid question, but i got 2.5 mm thingies and i need to get them all three down to sub 2.25 mm, I have tried most things (usually including it being the 'bit' in a powertool to rotate the thingie fast while sanding it).</p>
<p dir="auto">I cant really get any where, do i use too fine of a  paper for it? i only got 800 and finer paper. Any advice would be grateful as i feel im stuck at an easy step of the whole really fun adventure!  <img src="/assets/uploads/smileys/1196453940-SAKgif.gif" alt=":climber:" title=":climber:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1619555</link><guid isPermaLink="true">https://multitool.ninja/post/1619555</guid><dc:creator><![CDATA[stoneshank]]></dc:creator><pubDate>Thu, 18 Jan 2018 18:47:23 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Mon, 25 Sep 2017 11:30:18 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/magentus" aria-label="Profile: magentus">@<bdi>magentus</bdi></a> <a href="/post/1558681">said</a>:<br />
Congrats George - nice mod and love the name.  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">I look forward to your dream SAK  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">same here.  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f642.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--slightly_smiling_face" style="height:1.4em;width:auto;vertical-align:middle" title=":)" alt="🙂" />  good job there.  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1559081</link><guid isPermaLink="true">https://multitool.ninja/post/1559081</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Mon, 25 Sep 2017 11:30:18 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Sun, 24 Sep 2017 18:52:42 GMT]]></title><description><![CDATA[<p dir="auto">Its very nice!  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f604.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--smile" style="height:1.4em;width:auto;vertical-align:middle" title=":D" alt="😄" /> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1558724</link><guid isPermaLink="true">https://multitool.ninja/post/1558724</guid><dc:creator><![CDATA[Don Pablo]]></dc:creator><pubDate>Sun, 24 Sep 2017 18:52:42 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Sun, 24 Sep 2017 18:08:50 GMT]]></title><description><![CDATA[<p dir="auto">Congrats George - nice mod and love the name.  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">I look forward to your dream SAK  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1558681</link><guid isPermaLink="true">https://multitool.ninja/post/1558681</guid><dc:creator><![CDATA[magentus]]></dc:creator><pubDate>Sun, 24 Sep 2017 18:08:50 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Sun, 24 Sep 2017 17:26:24 GMT]]></title><description><![CDATA[<p dir="auto">Woo hoo: first mod done!!</p>
<p dir="auto">I present the... <em>Al Fresco</em>!</p>
<p dir="auto"><img src="https://i.imgur.com/sqAzNNe.jpg" alt="" class="img-markdown  img-fluid" /><br />
(I was to excited to photograph it &amp; show the world before final cleaning &amp; polishing...)</p>
<p dir="auto">This SAK isn't the dream SAK I'm hoping to make shortly, but a practice SAK for that dream SAK involving throwing some 'spare' SAK parts together.</p>
<p dir="auto">Once again, a thousand thanks for the inspiration &amp; how-to, Gareth; your original write-up has been invaluable.</p>
<p dir="auto">I'll make up a thread for the process in the very near future.</p>
]]></description><link>https://multitool.ninja/post/1558658</link><guid isPermaLink="true">https://multitool.ninja/post/1558658</guid><dc:creator><![CDATA[George S]]></dc:creator><pubDate>Sun, 24 Sep 2017 17:26:24 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Sun, 10 Sep 2017 19:41:30 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@George S <a href="/post/1551743">said</a>:<br />
Thank you for a great walkthrough, Gareth!</p>
<p dir="auto">I'm currently summoning the courage\waiting for parts &amp; knives to arrive before diving into a mod to make my dream SAK, and this post will be my holy book. Can't wait!</p>
<p dir="auto">Thanks for the inspiration, and I'll post pics of my journey.</p>
</blockquote>
<p dir="auto">All the best George and I look forward to seeing your work.  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1551943</link><guid isPermaLink="true">https://multitool.ninja/post/1551943</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Sun, 10 Sep 2017 19:41:30 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Sun, 10 Sep 2017 13:27:54 GMT]]></title><description><![CDATA[<p dir="auto">Thank you for a great walkthrough, Gareth!</p>
<p dir="auto">I'm currently summoning the courage\waiting for parts &amp; knives to arrive before diving into a mod to make my dream SAK, and this post will be my holy book. Can't wait!</p>
<p dir="auto">Thanks for the inspiration, and I'll post pics of my journey.</p>
]]></description><link>https://multitool.ninja/post/1551743</link><guid isPermaLink="true">https://multitool.ninja/post/1551743</guid><dc:creator><![CDATA[George S]]></dc:creator><pubDate>Sun, 10 Sep 2017 13:27:54 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Mon, 13 Jun 2016 07:36:35 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/aerocap" aria-label="Profile: Aerocap">@<bdi>Aerocap</bdi></a> <a href="/post/1281217">said</a>:<br />
Thank you much for the help Gareth, very good explanations and pics, that's how I will manage to do my first attempt to modifications  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">No problem at all Aerocap.  I look forward to seeing the results. <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1281364</link><guid isPermaLink="true">https://multitool.ninja/post/1281364</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Mon, 13 Jun 2016 07:36:35 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Mon, 13 Jun 2016 00:53:03 GMT]]></title><description><![CDATA[<p dir="auto">Thank you much for the help Gareth, very good explanations and pics, that's how I will manage to do my first attempt to modifications  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1281217</link><guid isPermaLink="true">https://multitool.ninja/post/1281217</guid><dc:creator><![CDATA[Aerocap]]></dc:creator><pubDate>Mon, 13 Jun 2016 00:53:03 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Fri, 17 Apr 2015 08:34:49 GMT]]></title><description><![CDATA[<p dir="auto">That's right.  As long as you use the right outer liner with the right blade you'll be OK. <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f642.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--slightly_smiling_face" style="height:1.4em;width:auto;vertical-align:middle" title=":)" alt="🙂" /></p>
]]></description><link>https://multitool.ninja/post/1074843</link><guid isPermaLink="true">https://multitool.ninja/post/1074843</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Fri, 17 Apr 2015 08:34:49 GMT</pubDate></item><item><title><![CDATA[Reply to A "how-to" for basic SAK mods.  Pic heavy. on Fri, 17 Apr 2015 03:22:49 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gareth" aria-label="Profile: Gareth">@<bdi>Gareth</bdi></a> <a href="/post/181175">said</a>:<br />
A quick shot here to show the new and old liners next to the blades.  On the new liner (top) you can see an indent that will sit next to the blade tang.  This is to compensate for the slimmer tang that can be seen on the newer blade next to it.  The most important thing you need to keep in mind is not to mix up old and new parts.  They won’t work and the blade will sit wrong in the finished knife, striking the top of the small blade.  Ask me how I know.  ::)</p>
</blockquote>
<p dir="auto"><img src="http://i100.photobucket.com/albums/m37/gareth_hunt/DSCF3560.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I would assume the stamped indention (compensating for the the blade thickness) shown in the picture are only done on the outer liners?  As long as one keeps the original outer liner with a layer it should be OK?</p>
]]></description><link>https://multitool.ninja/post/1074740</link><guid isPermaLink="true">https://multitool.ninja/post/1074740</guid><dc:creator><![CDATA[kosmo]]></dc:creator><pubDate>Fri, 17 Apr 2015 03:22:49 GMT</pubDate></item></channel></rss>