<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Peening Question]]></title><description><![CDATA[<p dir="auto">Alright so I was attempting to follow Neil's corkscrew/phillips swap guide and turn a tourist into a small tinker. I filed the pin down almost flush with the scale and chased it with my punch. Now, there are a couple of things I can imagine to be factoring into things not going as I had hoped. First of all is that instead of 2.25mm brass I am using .081in- the equivalent of 2.0574mm. Also as I tapped the brass rod through and it fought a little- I am concerned it might do allowing the liner and hole to swell out- if that makes sense- or stretch down into the gap, creating a problem when peening it back together.<br />
So the first time I got it together, it wasn't too tight, it just didn't have the snap I thought it would. So, considering the brass rod size difference, it might just not be putting as much tension on the backspring, although the peening job is fine. The second time I peened it but didn't have the brass short enough, so it had blade play, and also little snap. Then the third time I overpeened, and my silly roommate is studying so I don't want to keep hammering the night away and piss him off.<br />
So, my question is which would contribute to the reduced snap- overpeening, the caved in liner (slightly) or the undersized brass rod? I did use this size rod successfully with my last mod so that's perhaps what baffles me most. Likewise, when it was underpeened, there was still no snap. Finally, I even tried to "repair" the line area with filing, hammering to flatten out (with blade tangs in place as a guide) and all to no avail. Help?  :-\  <img src="/assets/uploads/smileys/kap.gif" alt=":surrender:" title="surrender" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/kap.gif" alt=":surrender:" title="surrender" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/topic/9829/peening-question</link><generator>RSS for Node</generator><lastBuildDate>Tue, 17 Nov 2026 16:51:31 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/9829.rss" rel="self" type="application/rss+xml"/><pubDate>Thu, 12 Mar 2009 05:42:50 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Peening Question on Fri, 13 Mar 2009 00:41:47 GMT]]></title><description><![CDATA[<p dir="auto">Yep.   All those things will effect snap.    The right size keeps the snap closest to factory and I have tried them all.   Anything under about .085in for the center pins will give you a little less.</p>
<p dir="auto">Once the liner is bent its tough to get it fixed without taking the knife apart, flattening it out and sanding it smooth.</p>
]]></description><link>https://multitool.ninja/post/181914</link><guid isPermaLink="true">https://multitool.ninja/post/181914</guid><dc:creator><![CDATA[scibeer]]></dc:creator><pubDate>Fri, 13 Mar 2009 00:41:47 GMT</pubDate></item><item><title><![CDATA[Reply to Peening Question on Thu, 12 Mar 2009 09:00:57 GMT]]></title><description><![CDATA[<p dir="auto">Most likely it's a combination of the slimmer brass rod and the slight damage to the hole.  Add those together and it sounds like, as you say, the tool isn't being held tightly enough to the backspring.  How is the action on the blades?</p>
]]></description><link>https://multitool.ninja/post/181497</link><guid isPermaLink="true">https://multitool.ninja/post/181497</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Thu, 12 Mar 2009 09:00:57 GMT</pubDate></item></channel></rss>