Skip to content

Gadget Freak and EDC Forum

1.8k Topics 52.0k Posts

If you want to talk about computers, PDA's, cell phones or any other gadgets or Every Day Carry gizmos, this is the place for you!

  • Small Laptops and Linux Distros

    11
    0 Votes
    11 Posts
    3k Views
    cody6268C
    I'm running Mint on a 5290. 12" and a 2-in-1. Wanted something that would replace a tablet I got in a deal from T-Mobile (and rarely used--AND hated) and give me a small, easily carried laptop for intensive use. I have the version with 16GB of RAM and an 8th gen i7. I think I paid $100 all-in (shipping and fees) from GovDeals. I really don't use it as much as I planned--as I'm using a full-on desktop I replaced earlier this year down in the basement. That's getting Linux too in its planned list of upgrades. I just don't know what I run on this PC that will run in Linux.
  • I need to rethink my pen carry...

    17
    0 Votes
    17 Posts
    7k Views
    Farmer XF
    @rodia77 said: That's a job for Sharpie or other permanent markers. I stick with ball-point pens for those jobs. Permanent marker ink takes a while to dry when applied to those surfaces. And maybe I need to take another look at Kaweco. @Jack the Zipper said: My latest find is the Big Idea Design Mini Pen... They have some nice-looking stuff, most of which seems to fall into the "Farmer X would be scared smurfless to lose that" price bracket. But I'd probably give their twisty Mini Pen a go.
  • Carson 20X Pocket Microscope

    5
    0 Votes
    5 Posts
    3k Views
    AzteCypherA
    That's pretty neat actually. There's a few times I could've used one of those.
  • To buy a new PC or stick with my laptop?

    16
    0 Votes
    16 Posts
    6k Views
    Farmer XF
    @Whoey said: There are new monitors that have the dock and charging integrated. Bolding mine, as charging is precisely the thing I want to avoid.
  • Rite in the Rain EDC All Weather pens

    20
    0 Votes
    20 Posts
    6k Views
    Grant LamontagneG
    Thanks for the link. I don't remember that thread, but then I don't remember much else from 2017 either! :ahhh This also shows the benefit of a forum- we can go back a long ways to find information that is just as accessible as it was the day it was posted. Try doing that on F_c_book.... And yes, I did change a few letters...... Rant over, I have to go back and read through that thread now! Def
  • .

    24
    0 Votes
    24 Posts
    4k Views
    Dutch_ToolerD
    . [attach id=0 msg=2544090] [image: 818202585118.jpg]
  • Needing help from the circuit gurus

    7
    0 Votes
    7 Posts
    3k Views
    Farmer XF
    @AzteCypher said: It's a real shame things are made to be thrown away instead of repaired. Unfortunately, I think that's the spot you've found yourself in here. Sure, you could conceivably modify the existing lights so they behave as desired. But time is money. These things are built so far down to a price that you'd be better off tossing them and getting something else. As Vidar says, that's especially true if the existing lights are a few years old and their batteries aren't quite cutting the mustard anymore. Good luck with this endeavor!
  • Anyone into ACU UCP pattern dyeing/fixing?

    23
    0 Votes
    23 Posts
    36k Views
    ?
    I’ve tried ACU UCP patterns a bit tricky, but really feels good when it turns out right.
  • Anyone have any feedback on the Morphvice?

    4
    0 Votes
    4 Posts
    3k Views
    V
    I searched and took a closer look. The width can be extended by adding more vices and mounting them next to each other. Titanium seems to be a separate option to stainless if you need portable. Then it makes more sense. A more general question popped up in my head about the use of such vises - if you need place an object precisely, or do a series of objects placed exactly in the same place, these vises seem to lack any obvious reference planes or holes to ease precise or repeated placement? (On a sidenote - if you have some really difficult stuff to hold, which can take a bit of temperature, then there are special low melting point metal alloys made for exactly that. Melt, pour around what you need to hold forming a clampable shape overall, then and melt away again when you are done).
  • Moustache Comb

    13
    0 Votes
    13 Posts
    4k Views
    K
    @pfrsantos said: Yes, I have this small kit with me everytime. [image: Revlon-One-Step-Blow-Dry-5-in-1.png?o=HcyVbCuG0eyL2jY4p3N$hU71rTIp&V=J3tr&w=600&h=600] A bit bulky, but the end result is worth it! [image: 97.jpg?w=600] Omg I cant unseen this
  • OLight OPen- O My

    3
    0 Votes
    3 Posts
    5k Views
    Grant LamontagneG
    @JonesE said: That green o pen looks good. I think I will give this pen a try. Thanks for the review. JonesE No problem. It was on sale at OLight for like $8 Canadian, regularly something like $15. I actually kind of like it and it will probably replace the Rite In The Rain pen in the Maxpedition organizer that I keep in the truck. The plastic on the PB is not textured and it's really slick as a result. If there was some kind of knurling or something I'd probably like it a bit better, but when I went to use it last week my hands were sweaty (been well over 30C here for the past week) I couldn't get a hold of it well enough to pull the cap off it. I look forward to giving the Mini 2 a bit more long term testing, but it has already far surpassed the Rite in the Rain pen. Def
  • Inexpensive Titanium Bolt Pen Smootherpro Ti754BL

    8
    0 Votes
    8 Posts
    4k Views
    Grant LamontagneG
    @JonesE said: Thanks Dan. I guess inexpensive is relative. I had a collection of Fenix T5Ti pens and We Knives TP-02 pens. I stored it in a nice leather pen case. I guess one day my wife or sons accidentally put it in with the items to go to donation. So this time around I am looking for much more inexpensive option so if they get lost or “borrowed“ I won’t mind as much. I now have my eye on the green one. JonesE $30 is not bad for a quality pen. I spend close to that on Fisher Bullets and their quality and reliability are well worth the extra $$ over cheaper pens. And I don't even want to tell you how much I spent on a Daryll Ralph titanium bolt action pen. Def
  • A not-so-great photo editing software conundrum

    20
    0 Votes
    20 Posts
    3k Views
    Farmer XF
    Can't believe I'm only just now replying to lister's post. I have played with Irfanware a little more extensively, and I found its ability to correct exposure a little lacking. I'll see if I might have better luck with Krita or GIMP.
  • Casio FX-260 find

    8
    0 Votes
    8 Posts
    2k Views
    pfrsantosP
    @Farmer X said: The Calculator Rabbit Hole is definitely there. I was eyeballing graphing calculators at Meijer today. Good thing I lack the need for and the money to purchase one. [image: giphy.gif]
  • Ko Konjōjo mini ratchet

    13
    0 Votes
    13 Posts
    3k Views
    ReamerPunchR
    @Grant Lamontagne said: I should have known.... Def Not many people seem to... :- Mine came with three Allen and two Torx. I'd rather have three Allen, a flat, and a Phillips.
  • Pocket dump challenge january 2025

    14
    0 Votes
    14 Posts
    3k Views
    Farmer XF
    "Soon" turned out to be nearly two months later. Nevertheless, here are some pocket dump photos. The first shows what is actually in or on my pants. I couldn't quite get it to look right because of the blue pen and/or my phone screen being on. [attach id=0 msg=2521833] And these weren't in my pockets, but I never leave my property without them. [attach id=1 msg=2521833] I'll bring earbuds and a 3.5mm to USB-C dongle if I'm going by vehicle, but otherwise this represents a fairly standard carry for me. [image: Farmer X Pocket Dump 8 March 2025 (1).jpg] [image: Farmer X Pocket Dump 8 March 2025 (2).jpg]
  • MOVED: Maxpedition EDC Organiser Owners Club

    Locked
    1
    0 Votes
    1 Posts
    2k Views
    ReamerPunchR
    This topic has been moved to [Sheaths, Bags, Packs and Carry Methods]. Link
  • Divoom Times Gate

    1
    0 Votes
    1 Posts
    2k Views
    ChakoC
    I saw this clock on Amazon and was very curious about this. I am still learning how to use this interesting device that is more than a clock. Meet the Divoom Times Gate. You have to sink this to your Wifi, and install an App on your cell phone which allows you to modify the information you can show on this device. The Times Gate comprises of 5 - 128x128 pixel display screens combined into an RGB casing. You can display all sort of things on this device from Pixel art, stock market info, to telling time. I am still learning the Application. What I can tell you is that you can display a lot of things on those 5 mini screens. You can clump them all together or you can change each screen individually. I was able to select a 5 screen clock display that shows the weather, and other things. I kind of like the info on this including a noise meter, that I might just leave it at this. The clock comes in a cardboard bag which contains a hard plastic case containing the Times Gate along with a multi language manual and a USB power cable. Here is the outer cardboard bag with rope handles. [image: 54306548197_7486b04d45_4k.jpg]20250203_163427A by Chako, on Flickr Inside is a hard plastic carry case. [image: 54306548162_b9b7b5b61b_4k.jpg]20250203_163621A by Chako, on Flickr Inside the hard plastic case is the clock. It is rather futuristic in design. [image: 54307667723_804814fd16_4k.jpg]20250203_163749A by Chako, on Flickr On top of the device are your control buttons. [image: 54307851250_7f8816161f_4k.jpg]20250203_164048A by Chako, on Flickr Here is the one I like the best so far after using the App to change the display. This one is a 5 display option that shows a lot of good data such as the weather, sound data, a news feed, and the date and time. There are many other options that focus on the stock market, or pixel art. [image: 54307415901_871a9f02c4_4k.jpg]20250203_193729A by Chako, on Flickr You can change the RGB effect using the top buttons. Overall, a real neat and pretty info giving device.
  • Gravastar Mercury M1Pro Wireless Gaming Mouse.

    1
    0 Votes
    1 Posts
    1k Views
    ChakoC
    I spied this interesting skeletonized gaming mouse on Amazon and thought it looked rather nice. There was a choice of going with a plastic body or the magnesium one, and decided that the magnesium Pro version might be interesting. I bought one, and I have no regrets. The package came with a extra set of gliding feet, as well as some grippy cut outs for the buttons. There is also a nice LED RGB effect that looks like a fire fly when it is activated. I am really digging the metal shell on this one. [image: 54306548302_b58109d46b_4k.jpg]20250127_154838A by Chako, on Flickr [image: 54307667813_a639b2f648_4k.jpg]20250127_154900A by Chako, on Flickr [image: 54307667808_dfd3fba47f_4k.jpg]20250127_155637A by Chako, on Flickr [image: 54307655204_aaeee9c1fe_4k.jpg]20250127_155649A by Chako, on Flickr [image: 54307655159_95474f3c20_4k.jpg]20250127_214952A by Chako, on Flickr This feels very premium and am very happy with it thus far. This is an easy recommendation for anyone looking for something a little different for a mouse.
  • Cellular Tracking

    6
    0 Votes
    6 Posts
    4k Views
    ?
    You can definitely check and delete your location history on your iPhone. To see where you've been, you can look at your Significant Locations. To find this, go to Settings > Privacy & Security > Location Services > System Services > Significant Locations. If you want to clear this history, just tap "Clear History" at the bottom of the screen. It's always good to review your location history and clear it out if you want to.