Folding Razel bldes from CRKT
-
They arrived yesterday.

These are Graham Brother designs. Absolutely beautiful folders (Vic fisherman for size compaison):

The Stubby Razel is perfect for EDC at the hospital. The Full sized Razel would garner bizarre looks.


The blades are ground on both sides, including the end! Pocket clips work extremely well and the thumb screws work very well.

New out of the box, the stubby Razel was extremely difficult to deploy, but after putting a Vic bottle opener into the slot and twisting against the liner lock led to a slight "click" after which, the knife was perfect.
The blades are very thick chunks of S30V steel:

On the full sized Razel, the liner lock has the LAWKs system of CRKT:

Basically, with the blade open and locked, pushing the knob to the lock position, rotates a small "arm" near the liner lock, preventing the lock from disengaging. Simple and effective.
Overall an excellent chunky hard working folder.

-
Very nice! I like 'em! ;) There are times when I wished I had one of those. Amongst other uses I could see
them being very nice in say a Video store setting where they would prove really handy at removing tape off
of glass windows.
-
I just bought a Stubby Razel and I love it. It's a fantastic value for the $$$.

-

Ever since CRKT picked 'em up...

-
Fine mini review that mate

I can't say I'm sold on the design, but it's a original at least

-
Looking good! And nice little write up. :)
I can see me getting one, one day.
-
[quote author=Mr. Whippy link=topic=16705.msg316853#msg316853 date=1264035621]
The blades are very thick chunks of S30V steel:

They are not S30V but 8Cr13MoV with a Rockwell of 58-59
They still hold and edge and because it's this steel instead of S30v it's probably better because it won't chip if the steel is abused. I know S30V had chipping issues that came from improper heat treatment when it first came out but I would think having S30V being abused that it might not take the heat so to speak. The Graham knives are 154CM, maybe they feel it works better for their application and what they use the steel for, I have no idea. I do have a full size razel and it's a bad a$$ all the way!!

-
They are not S30V but 8Cr13MoV with a Rockwell of 58-59
They still hold and edge and because it's this steel instead of S30v it's probably better because it won't chip if the steel is abused. I know S30V had chipping issues that came from improper heat treatment when it first came out but I would think having S30V being abused that it might not take the heat so to speak. The Graham knives are 154CM, maybe they feel it works better for their application and what they use the steel for, I have no idea. I do have a full size razel and it's a bad a$$ all the way!!
I repeated this to make this clear. David's right, I had it wrong. it IS made of 8Cr13MoV steel.
My error! :-X
Thanks for the clarification David!

-
No problem
was not sure if you knew the steel type or was misinformed. Don't get me wrong, the steel performs rather well. -
Alright, this thing (standard folding Razel) is a total beast! It slices through plastic packing straps like they're nothing! This thing is a beast! (with extremely ergo handles.).
I feel a sea change in my EDC on the farm... ;)
-
@Mr. Whippy said:
The Stubby Razel is perfect for EDC at the hospital. The Full sized Razel would garner bizarre looks.
Really? it's only a 3" blade. ???
Yea, in a hospital setting, less is more. I get away with SAKs because they're SAKs but a proper folder would lead to a high level of concerned comments.
-
I've been torn about getting one of the full sized ones. Good luck with them. BTW, is it just me or does the full sized Razel's lockbar look thinner than the smaller Razel's?
-
-
Wanted to give you guys an update on the larger folding razel that I own. I was putting up a shelf in the girls room that will hold stuffed animals and even though it's not going to hold heavy stuff I am going to put it where the stud is located. Since this is a trailer there is a molding strip in the places I want the bracket to go. I needed to cut some of the strip to make room for the bracket, instead of running out to the tool shed to find a chisel I got smart
and used my Razel to trim the strip of molding. Using my hand as a hammer I hit the end of the Razel and got like 3/4 of the way through the molding strip and figured I should go get a real chisel. I go to close the Razel and put it away and the blade rubbed on the liners. :o Now I did not use it very hard and this knife is suppose to take this kind of abuse right? I just used my torx drivers and re-centered the blade and make sure it worked like it was suppose to. Question begs, if I am to use this thing in chisel type situations and it cannot withstand my hand as a make shift hammer, then why does this model present itself as such. Anyways, just ranting. -
Eh, I don't think there's anything you can do to the regular folding knife platform that would completely make it useable as a fixed blade. Regardless of how much they try. shrugs
-
While I agree that a folder will never be able to take the abuse of a fixed blade, it seems to me, that the folding Razel should be able to take some palm hammering without getting the blade off center on the pivot pin.
David: Does the blade have more play now? If so, it'd be going back toot sweet, if it were me...
-
Wow Mr. W your really hard on tools you already broke the point off both those knifes. :ahhh
:D On a more serious note they do look like they can handle some strenuous work. -
No the blade is re-centered and there is no wobble or play. All I did was take off the pocket clip and loosen the screws on both sides of the pivot. I pushed the blade to the side it needed to be closer too and tightened it back up again. I do realize it should take more of a beating and I do agree that it's a folder and not a fixed blade but your right, using the heel of my palm should not have been enough to cause it to do this. I did use the LAWKS feature to make sure it would not close on my hand though. The blade is so stout and takes up so much real estate in between the handles that there really is little room for error.
-
I like the chisel look of the blade. I still want to own some day one of these: http://www.spyderco.com/catalog/details.php?product=236
But these could be a cheaper alternative...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login