SuperJuice KFS4
-
As mentioned in another thread, I'm out to build my "perfect" Juice tool. The goal is to make it KF4-sized, but trade the seldom-used saw blade (seldom used by me anyways ::)) for a set of scissors. I'm also wanting both knife blades to be one-hand openers. Last but not least, my perfect Juice tool needs a pocket clip. :)
Step 1) Obtain a reasonably priced XE6 from eBay to use as mod fodder. (none of the other standard models has all the components I need)
Step 2) Attempt to add thumb studs to the knife blades. This has proven to be extremely difficult on previous attempts. The blade steel is quite hard, and can only be drilled with solid carbide tooling. :-\ I was able to drill and spotface a hole, but a high speed steel tap broke when I tried to add threads. :( (see broken tap - gold tini coated - in the background)
Looks like the thumb studs will have to be press fitted into place.


Step 3) Disassemble the XE6. This looked much easier than it actually turned out to be. :P Simply cutting off the rivet heads was only the beginning. >:(


The purple anodized aluminum scales came off easily. But underneath, the rivets are mushroomed out into the skeletonized liners. It was a major PITA to finally get them free.


AT LAST!!



Step 4) Make new scales. :-\
Yup, you heard me. After considering a number of other compromises, it seemed that there was no other way to properly allow room for the knife blade thumb studs, AND provide enough material thickness to drill and tap for the pocket clip. (the stock aluminum scales on Juice tools are almost paper thin, and far too weak to attach a clip to) :(
So, on with the new scales.
(And if new scales need to be made anyway, they may as well be made from titanium right?) :)

Actually these are not simply replacement scales. They are a combination scale, liner, and backspring rest. At this point they are only halfway done. When finished, they will be the same size as the original scale/liner I am pinching together in the photos. :)


Step 5) Modify the pocket clip.
I started off with a Knifekits.com model #23, available HERE. Shallow counterbores were added to the face of the holes. These allow the screw heads to sit slightly more flush. They also fit very closely to the screw heads, which should minimize the tendency of the clip to wiggle. :)


Step 6. Finish machining the bottoms of the scales
Step 7. Install thumbstuds
Step 8. AssembleBut its late, and I'll have to do the rest next weekend. :-\ So far so good though. :)
Some parting pics:


-
Tease. :P No, no, that looks very nice, J-sews. :)
-
Nice mod ! , Thank a lot for photo to precess take off the frame .

-
Fan-frickin'-tastic. WOW!!! That is great work!!
-
Unbelievable! :o
That is beautiful!
I guess I won't post up my pictures of my popsicle stick SAK with Bent nails as pins... :-\
;) (That's how I feel about my modding skills when looking at the work of a master.)
-
@Mr. Whippy said:
Unbelievable! :oThat is beautiful!
I guess I won't post up my pictures of my popsicle stick SAK with Bent nails as pins... :-\
;) (That's how I feel about my modding skills when looking at the work of a master.)
Well about the only thing I seem to be a master at is "starting" projects. ::) We'll see what happens when and IF it ever gets finished! :P :D
-
WOWSERS Bob , that is looking Brilliant

I have been wondering about how hard it would be to put a thumb stud on a Buck110 I have on the way. Sounds a bit tricky :(
Bob GREAT work mate

-
@MultiMat said:
WOWSERS Bob , that is looking Brilliant

I have been wondering about how hard it would be to put a thumb stud on a Buck110 I have on the way. Sounds a bit tricky :(
Bob GREAT work mate

I remember there being a third-party thumbstud kit you could purchase to add to a THO blade, but I forget the name of it. :/
-
That is simply genious work!

Do you run a machine shop?
-
How about countersinking the other side of the blade and riveting the thumbstud in place...like a Victorinox bushing?
-
I'll trade my silver 2xAAA Maglite for one. Do we have deal?
:D
-
You are the man Bob.

-
Nice! Curious about the end result

-
That's amazing work Bob.. :o :o

-
Great job Bob
can't wait to see it complete
:D 
-
What do you mean by getting rid of the saw >:(
Bloody impressive work again there Bob

-
:( i want bobs skills :P
awesome work

-
Skills to pay the bills. This is why I have mad respect for machinists.

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login