Survival candle
-
I saw this on youtube
Its a bit like Sporks corrugated cardboard dipped in wax fire starter, hes probably made one of these in the past knowing how he likes making outdoor gear
As you know I have a garage full of
crapstuff so decided to have a go at making one ;)They are not as elegant as the little penny burners but very robust and you don't have to worry about spilling meths or evaporation over time

I found what I think is an old film tin and some candles that have been kicking around here for 20 years (I think I got them from the Army surplus store)





Wick insertion tool in action :D




That works

-
I bet it smells though :P
Its a good idea though. I've got a bunch of candles, I might make one just to pop at the back of the pantry for emergencies.
-
Its not too bad ;)

-
Good stuff Sparky...that's a classic "Hobo" burner (aka Buddy Burner)...they are stinky though (the burner...well maybe the Hobo too :P )
Have you tried them as a cooker yet? They do work, but be prepared for very sooty pots.
-
...you can keep them going by adding chunks of wax as they are burning.
-
That looks good mate, might just have a go at making one myself.
-
I have only lit it to see what it looked like, I think I will save it until the warm weather gets here

Rp, Very easy to do

The hardest thing is cleaning the wax off the top of the cooker afterwards :-[ ::)No one has noticed the 'Wick insertion tool' yet
:D -
I saw it! Just thought you were a little hard on your tableware...or it was a brain hook for your other hobby of preparing Egyptian Mummies...

-
Same as Spork :-[ :D
-
Very cool Tony. I especially like the wick insertion tool. :D
-
Now I'm wondering which SAK tool I can modify into a wick insertion tool...

-
I had a go at making one of these myself. Works a treat :). I didn't use a special wick insertion tool though :(
Took about 5 candles to make the thing. Mini homegrown hobo stove. Cheers mate :)
-
I am not sure if the wicks will work when I relight it but as I had them floating around in the wax I thought 'why not'
Then I thought how do I get the wicks in and don't want to get my long nosed pliers covered with wax :-\Spork, I think its use would be a bit limited, Unless you are getting in to the whole taxidermy/mummification thing >:D
Mine took five x 41/2 inch candles

-
I thought I had a round Altoids tin that I could use. Just went hunting to find my youngest has nicked it to make a robot head ::)
-
At least it went to a good cause. :D -
I experimented with mini burners using teacandle cups a while back. The first burn test was a bit of a disaster...the wax overheated and actually boiled over. I put a plain cotton ball on top as a wick for the second test...that's the one burning in the photo.
Also you can see how much the mug is blackened with soot in the photo.

-
This one looked like fun but I'm not sure how practical it is

-
Very cool. 8) I agree that it doesn't look that practical, that's a pretty small amount of water he's boiled.
-
Where do you guys get wax? Buying pre-made candle is fine for small stuff but for things like this it's gets expensive.
-
I buy household paraffin wax...found with the canning supplies at the grocery store.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login