Skip to content
  • Categories
  • Recent
  • Popular
  • World
Skins
  • Light
  • Dark

Collapse

NodeBB

The KEBOOP : KEyring BOx OPener

Scheduled Pinned Locked Moved Keychain and One Piece Tools
23 Posts 1 Posters 8.0k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • m47mu74ntM
    m47mu74ntM
    m47mu74nt
    wrote on last edited by
    #1

    I had a spare part of Ti 55252mm and wanted to make something like a keyring tool out of it.
    Here is the KEBOOP : KEyring BOx OPener
    It's main purpose is to open boxes (break tape mostly) so it has a corner that is sharp enough for the job, but dull enough not to accidentally cut the user.
    Secondary functions are : cap lifter, belt cutter and wire bender
    *Vic Sentry (84mm) for scale ๐Ÿ™‚
    *

    Ti has been anodized at 57V, but this time i could achieve a light blue that even has some yellow accents (in the very right side) ๐Ÿ‘ผ

    Hope you like it ๐Ÿ™‚
    Feel free to build one based on this and improve my simple design

    Here my main limitations were the material: the Belt cutter can't be used many times as the Ti grade 2 can't be hardened enough to hold sharpness for long, and the 2mm thickness prevent the tool to be used as pry bar. But, it is extremely lightweight!!
    The main hole took me ages to drill (needed to use 2, 4, 6, 8, 10mm drill bits one after the other!!)

    1 Reply Last reply
    0
    • BoazB
      BoazB
      Boaz
      wrote on last edited by
      #2

      Very nice, a simple clean design.

      1 Reply Last reply
      0
      • rdub934R
        rdub934R
        rdub934
        wrote on last edited by
        #3

        Great job!

        1 Reply Last reply
        0
        • Y
          Y
          yourbadneighbor
          wrote on last edited by
          #4

          Great job, looks handy.

          Sent from my SPH-L720 using Tapatalk

          1 Reply Last reply
          0
          • FortytwoF
            FortytwoF
            Fortytwo
            wrote on last edited by
            #5

            That looks like a neat little piece, good job!

            1 Reply Last reply
            0
            • m47mu74ntM
              m47mu74ntM
              m47mu74nt
              wrote on last edited by
              #6

              Thanks guys ๐Ÿ˜„

              1 Reply Last reply
              0
              • m47mu74ntM
                m47mu74ntM
                m47mu74nt
                wrote on last edited by
                #7

                I've just noticed i forgot the WIP pictures:
                Raw material:

                It took me ages to drill that hole, to prevent the piece from spinning and ruin my hand i fixed it with an home made ghetto clamp:

                Testing the belt cutter (before anodizing):

                Usage feedback:

                • Box opener works extremely well to break tape seals
                • Belt cutter works better than expected to cut the PET packing belts (no wearing signs after a few days of intense usage)
                • I didn't even tried the cap lifter btw...
                1 Reply Last reply
                0
                • Syph007S
                  Syph007S
                  Syph007
                  Global Moderators
                  wrote on last edited by
                  #8

                  Ti-6-4 can be used ok for a cutting edge if you lay down some carbide on one side, and do a chisel grind. It ends up being like a beaver tooth and self sharpens. It never is as sharp as a steel edge, but perpetually maintains a good enough edge and it good for things like a utility knife, for box breakdown etc.

                  1 Reply Last reply
                  0
                  • m47mu74ntM
                    m47mu74ntM
                    m47mu74nt
                    wrote on last edited by
                    #9

                    @Syph007 said:
                    Ti-6-4 can be used ok for a cutting edge if you lay down some carbide on one side, and do a chisel grind. It ends up being like a beaver tooth and self sharpens. It never is as sharp as a steel edge, but perpetually maintains a good enough edge and it good for things like a utility knife, for box breakdown etc.

                    hmmm, my Ti material is SPEC TI-P99002 ABS5142A aka T-40 (which i think is a grade 2 Ti) so i don't know if it can be done with it (and i don't have anything to carbidize it, or do i? no idea the tools needed for DIY)
                    Here it is only anodized, the edge is anodized to light blue (ฮป ~ 530nm) which gives something like 0.2ยตm of oxide (approximated from here)

                    1 Reply Last reply
                    0
                    • Syph007S
                      Syph007S
                      Syph007
                      Global Moderators
                      wrote on last edited by
                      #10

                      @m47mu74nt said:

                      @Syph007 said:

                      Ti-6-4 can be used ok for a cutting edge if you lay down some carbide on one side, and do a chisel grind. It ends up being like a beaver tooth and self sharpens. It never is as sharp as a steel edge, but perpetually maintains a good enough edge and it good for things like a utility knife, for box breakdown etc.

                      hmmm, my Ti material is SPEC TI-P99002 ABS5142A aka T-40 (which i think is a grade 2 Ti) so i don't know if it can be done with it (and i don't have anything to carbidize it, or do i? no idea the tools needed for DIY)
                      Here it is only anodized, the edge is anodized to light blue (ฮป ~ 530nm) which gives something like 0.2ยตm of oxide (approximated from here)

                      To DIY carbidize you need a dremel engraver or similar, a carbide mill bit (broken ones work great) and a power source that can do around 50v up to 2 amps.

                      1 Reply Last reply
                      0
                      • Grant LamontagneG
                        Grant LamontagneG
                        Grant Lamontagne
                        administrators
                        wrote on last edited by
                        #11

                        This seems like a very handy little tool, and a lot more functional/better designed than a lot of One Piece Tools out there.

                        If they ever hit production, let me know- I'd be down for one for sure.

                        Def


                        1 Reply Last reply
                        0
                        • m47mu74ntM
                          m47mu74ntM
                          m47mu74nt
                          wrote on last edited by
                          #12

                          @Syph007 said:
                          To DIY carbidize you need a dremel engraver or similar, a carbide mill bit (broken ones work great) and a power source that can do around 50v up to 2 amps.

                          my PC PSUs can give me quite a lot of amps but at 3.3, 5, and 12V, but my other PSUs i have under hand hardly give me half an amp at 50V xD, looks like DIY carbidizing is not for today here ๐Ÿ™‚

                          @Grant Lamontagne said:
                          This seems like a very handy little tool, and a lot more functional/better designed than a lot of One Piece Tools out there.

                          If they ever hit production, let me know- I'd be down for one for sure.

                          Def

                          My design is totally unprotected -say open-source if you wish-, so anybody can adapt and produce it ๐Ÿ™‚
                          Another feedback for today: i noticed that the angle of the belt cutter isn't good, it needs a lot more force to cut than traditional ones (because on the others the edge is nearly in the axis of the arm when slicing, here user wrist needs to be bent downwards to get the right cut angle)

                          1 Reply Last reply
                          0
                          • m47mu74ntM
                            m47mu74ntM
                            m47mu74nt
                            wrote on last edited by
                            #13

                            i made a 3D preview of it (with enhanced belt cutter angle) :
                            i can push it to github when finished ๐Ÿ™‚

                            Preview.jpg

                            1 Reply Last reply
                            0
                            • H
                              H
                              Humppa
                              wrote on last edited by
                              #14

                              I really like this tool. And the idea!

                              Just a great one. That would work rather well on my keychain. Almost thought about a small series? :pok: :pok:

                              1 Reply Last reply
                              0
                              • WeaselW
                                WeaselW
                                Weasel
                                wrote on last edited by
                                #15

                                Looks good :salute:

                                1 Reply Last reply
                                0
                                • m47mu74ntM
                                  m47mu74ntM
                                  m47mu74nt
                                  wrote on last edited by
                                  #16

                                  4 months later, using the tool daily:

                                  • The box opener works still great, i resharpened it twice on a flat metal surface to keep it's edge
                                  • The belt cutter needed a few more resharpening (a few passes on a cardboard box angle once in a while -like you can do on leather for straight razors-, and voilร ! lots of PET packing belts died since the tool was made)
                                  • Ti anodizing didn't wear much -only sharpening scares-
                                  • I din't use the cap lifter enough to say anything about it

                                  This build is far from being something that could be sold or anything, but i'm extremely happy with it for personal usage : It fits my needs very well and i don't think i would change anything but the material (stronger Ti or Steel)

                                  1 Reply Last reply
                                  0
                                  • zoidbergZ
                                    zoidbergZ
                                    zoidberg
                                    wrote on last edited by
                                    #17

                                    Keep the updates coming mate. :cheers:

                                    1 Reply Last reply
                                    0
                                    • m47mu74ntM
                                      m47mu74ntM
                                      m47mu74nt
                                      wrote on last edited by
                                      #18

                                      Six months later: first time I use the cap lifter IRL:
                                      It works, But could have been better if I did keep the lifting part squared and "sharp angled" instead of sanding it round .... :facepalm:

                                      keyboop_schweppes0.jpg

                                      keyboop_swheppes1.jpg

                                      1 Reply Last reply
                                      0
                                      • ddoguD
                                        ddoguD
                                        ddogu
                                        wrote on last edited by
                                        #19

                                        @m47mu74nt said:
                                        Six months later: first time I use the cap lifter IRL:
                                        It works, But could have been better if I did keep the lifting part squared and "sharp angled" instead of sanding it round .... :facepalm:

                                        No problem. As long as the one you wanna give away has a sharper angled bottle opener we won't complain ๐Ÿ˜„ :gimme:

                                        1 Reply Last reply
                                        0
                                        • pfrsantosP
                                          pfrsantosP
                                          pfrsantos
                                          wrote on last edited by
                                          #20

                                          @m47mu74nt said:
                                          Thanks guys ๐Ÿ˜„

                                          Pretty cool idea and execution.

                                          :salute: :tu:

                                          Those inserts on the Sentinel are original or made by you? What is the other SAK?

                                          :think:

                                          1 Reply Last reply
                                          0

                                          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                          With your input, this post could be even better ๐Ÿ’—

                                          Register Login

                                          • Login

                                          • Don't have an account? Register

                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Popular
                                          • World