[image: dJMaLK7lQpqunT3IF9O9D40rKbPkv7goc1QSw22Z.jpg]
Kakuri Sangyo Sundry SDR-B02 mini ratchet set
(Sundry is a product line of the Kakuri Sangyo brand.
The ratchet can also be found branded by Ares, SabreCut, Sealey)
Max torque rating: 58 Nm / 43 ft lb
Weight: 58g
Bit set: 46g
Socket set: 60g
Set weight: 164g
Length: 85mm
Head width: 21mm
Head clearance with standard bit: 25mm (adds no length)
Teeth count: 72
Minimum swing arc: 5°
Bit retention: Ball detent
In-line driver retention: Ball detent
Bit material: S2 steel
Handle material: Chromium-Vanadium steel
Ratchet gear material: Chromium-Molybdenum steel
Price: $14 with 8 bits and 6 sockets
Bits: Phillips 1, 2, Flat 4, 6, Allen 4, 5, 6, Square Socket adapter
Sockets: 4, 5, 5.5, 6, 8, 10
Accessories
The Sundry mini ratchet comes with seven standard bits, a socket adapter, and six sockets.
The bits are stored in a plastic, modular bit holder that consists of three pieces. This allows users to carry three, five, six, or eight bits, depending on configuration. It has a loop that allows more bit holder pieces to be added, or can be used to attach the bit holder to something with a carabiner or clip.
The sockets are stored in a plastic rail and are held by friction. It has a hole that fits small split-rings, so it can also be attached to a carabiner.
[image: N8F3IGCsNDNq9nWBG6dEzSZ9bztkCQ43G7GsVoxb.jpg]
Dimensions
The Sundry is the exact same ratchet as the Ares, except painted black. It is short, at 85mm. It has a stocky, robust body, with a somewhat wide head. The Sundry adds no length to the inserted bit.
[image: cmzgCrtg6mjXDLRL6led1fKK2CD7cAjC4I5GHJR4.jpg]
Bottom right: CROM, Vessel 4mm, Sundry, Ares, Wera, Tone, Railer, Blue-Point, WorkPro, Victorinox
Teeth Count
The Sundry has a very high teeth count, at 72, which gives a very low swing arc, at 5 degrees. This is just excellent for an inexpensive ratchet like this.
Bit Retention
The Sundry has ball detents for both slots. This allows the bits to be removed easily, even stubby bits. For a little more retention, have the ball detent rest on the marked side of bits, for more traction.
Bit compatibility
Stubby bits can be removed very easily. Standard double-ended bits and Leatherman proprietary bits will fit the ratchet end, if one end is slim enough to clear the hole. They do not work in the in-line driving socket, as it is too shallow for them to engage and turn properly.
Impact bits and extensions work beautifully in both ends, as the ball detents are at the perfect height to hold them in place.
[image: JGfAbdtkMbbifL6txZfLJ4x8Sm2KLFhJdC0NMCKH.jpg]
Switch action
The Sundry has a sliding switch. This has better detent than the Ares. It does not move accidentally. As it is a slider, it sits flush against the body and does not catch on anything. It is knurled in two opposite directions, to make it easy to operate.
Ease of use
The Sundry has an in-line bit driver slot, and both slots have ball detents, making it easy to swap bits. The weight is not enough to cause concern. When using the in-line driver slot, the neck flanges provide enough traction for the tool to turn even stubborn screws. The high teeth count allows for very little swing to turn a bit, so even with almost no space to move the tool, it will still turn fasteners. The ratcheting end also adds no length to a bit, allowing for very low clearance, especially paired with stubby bits.
It does not have a knurled finger wheel. The in-line bit socket is not funnelled, which is unusual, although bits are still easy to insert.
[image: zHV88rKXg6sHIYoTdhpgGsyo2JLIFVpjILmor82T.jpg]
Construction Quality
The Sundry is decently finished. The slider's channel and neck flange channels may look just a tiny bit unpolished, but the black paint does a good job of masking any imperfections. The paint itself has held up nicely. The ratcheting action is smooth and consistent. The bits fit the slots well with little wobble. The ball detents work as they should, providing adequate retention.
Portability
The Sundry may seem heavy, but it is also very short. If it comes down to length but not weight, it will do well. With wide ends and a thin body, it fits well in edc pouches and multi-tool case side-sleeves, even pen sleeves. The ratcheting head has a hole, which allows the tool to be clipped to a pack or key-chain with a quick release clip or carabiner.
The bit holder and socket rail can be attached to a clip.
[image: rMwjcV7dvPLEan5PctE9wIlC2dkwRkjypDsQFpez.jpg]
Value
At $14, it is already a good value for money, considering its pros and that it comes with eight bits and six sockets. But it gets even better, when compared to the Ares mini ratchet set.
Conclusion
The exact same ratchet as the Ares, the Sundry has high teeth count, high bit compatibility, an in-line driver, and adds no length to a bit's clearance. It also comes with six sockets, and eight S2 steel bits, compared to the eight Chromium-Vanadium the Ares comes with. It also is less expensive than the Ares.
This is truly an amazing deal, considering the accessories and all that the ratchet has to offer. It may be an elusive deal, though, as the set is not readily available. It does appear in Amazon Japan and Amazon AU, so not impossible to find.
The Ares ratchet has remained a staple in the recommendations of this thread, and the Sundry is no different. If you happen upon it, and the price has not changed much, this is a capable little set and excellent value for money.
[image: hpTc6gbFt4f7aZvwbcr13IwaGrhlLJ42hg98FCeq.jpg]
Pros
-Heavy duty.
-Flanged neck for easier in-line driving.
-High teeth count.
-Ratcheting end adds no length to inserted bit.
-Good but not overly strong bit retention.
-Ratchet end compatible with many double-ended bits.
-Better value than the Ares ratchet set.
Cons
-Not readily available.
If you liked this ratchet, also check out:
[image: 5QccL3y.png] [image: aXGV6hd.png] [image: XQh1yeg.png] [image: oY60Ldk.png] [image: aDXqTy9.png] [image: uNmSjg5.png] [image: 6dBVzup.png]