What's your latest Leatherman?
-
-
[quote author=Monrogue link=topic=33794.msg998276#msg998276 date=1417790944]
Dmac is Monrogue's top Archnemesis, but Harley may have just dethroned him with this stunt

Monrogue suggests Dmac and Harley do battle over who is Monrogue's top Archnemesis

DANCE OFF!

I'd pay good money to watch that

[/quote]
That would be quite a site I bet ;) -
My latest is a Surge.
I've also got a Micra, Blast and Fuse.
The Micra gets used the most. -
[quote author=derekmac link=topic=33794.msg998414#msg998414 date=1417794729]
[quote author=Monrogue link=topic=33794.msg998276#msg998276 date=1417790944]
Dmac is Monrogue's top Archnemesis, but Harley may have just dethroned him with this stunt

Monrogue suggests Dmac and Harley do battle over who is Monrogue's top Archnemesis

DANCE OFF!

I'd pay good money to watch that

[/quote]
That would be quite a site I bet ;)
[/quote]Don't be hating my skillz!
-
[quote author=Monrogue link=topic=33794.msg998711#msg998711 date=1417804823]
[quote author=derekmac link=topic=33794.msg998414#msg998414 date=1417794729]
[quote author=Monrogue link=topic=33794.msg998276#msg998276 date=1417790944]
Dmac is Monrogue's top Archnemesis, but Harley may have just dethroned him with this stunt

Monrogue suggests Dmac and Harley do battle over who is Monrogue's top Archnemesis

DANCE OFF!

I'd pay good money to watch that

[/quote]
That would be quite a site I bet ;)
[/quote]Don't be hating my skillz!
[/quote]
I bet you do a mean breakdance routine.... -
[quote author=HarleyXJGuy link=topic=33794.msg999302#msg999302 date=1417833729]
[quote author=Monrogue link=topic=33794.msg998711#msg998711 date=1417804823]
[quote author=derekmac link=topic=33794.msg998414#msg998414 date=1417794729]
[quote author=Monrogue link=topic=33794.msg998276#msg998276 date=1417790944]
Dmac is Monrogue's top Archnemesis, but Harley may have just dethroned him with this stunt

Monrogue suggests Dmac and Harley do battle over who is Monrogue's top Archnemesis

DANCE OFF!

I'd pay good money to watch that

[/quote]
That would be quite a site I bet ;)
[/quote]Don't be hating my skillz!
[/quote]
I bet you do a mean breakdance routine....
[/quote]Finally!
My wife would disagree with you and asks that you not give me any ideas. Her words.
-
[quote author=kirk13 link=topic=33794.msg999933#msg999933 date=1417897105]
[quote author=HarleyXJGuy link=topic=33794.msg999302#msg999302 date=1417833729]
[quote author=Monrogue link=topic=33794.msg998711#msg998711 date=1417804823]
[quote author=derekmac link=topic=33794.msg998414#msg998414 date=1417794729]
[quote author=Monrogue link=topic=33794.msg998276#msg998276 date=1417790944]
Dmac is Monrogue's top Archnemesis, but Harley may have just dethroned him with this stunt

Monrogue suggests Dmac and Harley do battle over who is Monrogue's top Archnemesis

DANCE OFF!

I'd pay good money to watch that

[/quote]
That would be quite a site I bet ;)
[/quote]Don't be hating my skillz!
[/quote]
I bet you do a mean breakdance routine....
[/quote]Finally!
My wife would disagree with you and asks that you not give me any ideas. Her words.
[/quote]
As long as you don't pull or sprain anything, there shouldn't be anything for her to worry about ;) -
[quote author=Monrogue link=topic=33794.msg1000004#msg1000004 date=1417898823]
[quote author=kirk13 link=topic=33794.msg999933#msg999933 date=1417897105]
[quote author=HarleyXJGuy link=topic=33794.msg999302#msg999302 date=1417833729]
[quote author=Monrogue link=topic=33794.msg998711#msg998711 date=1417804823]
[quote author=derekmac link=topic=33794.msg998414#msg998414 date=1417794729]
[quote author=Monrogue link=topic=33794.msg998276#msg998276 date=1417790944]
Dmac is Monrogue's top Archnemesis, but Harley may have just dethroned him with this stunt

Monrogue suggests Dmac and Harley do battle over who is Monrogue's top Archnemesis

DANCE OFF!

I'd pay good money to watch that

[/quote]
That would be quite a site I bet ;)
[/quote]Don't be hating my skillz!
[/quote]
I bet you do a mean breakdance routine....
[/quote]Finally!
My wife would disagree with you and asks that you not give me any ideas. Her words.
[/quote]
As long as you don't pull or sprain anything, there shouldn't be anything for her to worry about ;)
[/quote]Yeah something about never showing her face around her friends and boss again.
Something about last years work Christmas party.
-
Lol
-
I reclaim this thread in the name of acquired Leatherman tools!
I got a Style today. Not a Style PS or CS, just a Style. Tiny Multitool POWER!!!
-
I picked up a Squirt E4 in pretty much new condition today at a gun and knife show.
I was a little shocked to see the full 3d philips head on it. It's very nice. I was expecting the flat phillips that I've seen on all the other Squirts.
It's a red Radio Shack branded one.
-
@Lynn LeFey said:
I picked up a Squirt E4 in pretty much new condition today at a gun and knife show.I was a little shocked to see the full 3d philips head on it. It's very nice. I was expecting the flat phillips that I've seen on all the other Squirts.
It's a red Radio Shack branded one.
That one is the scissor model right?
-
@Lynn LeFey said:
I picked up a Squirt E4 in pretty much new condition today at a gun and knife show.I was a little shocked to see the full 3d philips head on it. It's very nice. I was expecting the flat phillips that I've seen on all the other Squirts.
It's a red Radio Shack branded one.
Surprisingly I had no idea the E4 had a 3D Philips. I must have one now!

-
@Lynn LeFey said:
I picked up a Squirt E4 in pretty much new condition today at a gun and knife show.
I was a little shocked to see the full 3d philips head on it. It's very nice. I was expecting the flat phillips that I've seen on all the other Squirts.
It's a red Radio Shack branded one.
That one is the scissor model right?
E4 has wire strippers in place of the pliers/scissors.

-
@Lynn LeFey said:
I picked up a Squirt E4 in pretty much new condition today at a gun and knife show.
I was a little shocked to see the full 3d philips head on it. It's very nice. I was expecting the flat phillips that I've seen on all the other Squirts.
It's a red Radio Shack branded one.
That one is the scissor model right?
E4 has wire strippers in place of the pliers/scissors.

Are there folks out here who are not electricians who do so much wire stripping they have to carry a tool like this all the time?
-
@Lynn LeFey said:
I picked up a Squirt E4 in pretty much new condition today at a gun and knife show.
I was a little shocked to see the full 3d philips head on it. It's very nice. I was expecting the flat phillips that I've seen on all the other Squirts.
It's a red Radio Shack branded one.
That one is the scissor model right?
E4 has wire strippers in place of the pliers/scissors.

Are there folks out here who are not electricians who do so much wire stripping they have to carry a tool like this all the time?
I doubt it, but one can never be to prepared I guess. In all honesty I only really use the tip of the pliers on the small tools like this anyways so if I had one it would not be much of a problem having wire strippers for the rest of the length.
-
My latest is a pair of BO Rebar handles with pliers removed, and a BO CC head from a Fuse or Wave or something. To be honest I got these a while back but have only just fitted the CC head this weekend. Now I just have to decide what I'm doing with the loadout in the handles

-
@50ft-trad said:
My latest is a pair of BO Rebar handles with pliers removed, and a BO CC head from a Fuse or Wave or something. To be honest I got these a while back but have only just fitted the CC head this weekend. Now I just have to decide what I'm doing with the loadout in the handles
Knifeless, with scissors, large bit driver, no saw and 7/8/10/13mm wrenches. 8) And a pocket clip.

-
@50ft-trad said:
My latest is a pair of BO Rebar handles with pliers removed, and a BO CC head from a Fuse or Wave or something. To be honest I got these a while back but have only just fitted the CC head this weekend. Now I just have to decide what I'm doing with the loadout in the handles

Knifeless, with scissors, large bit driver, no saw and 7/8/10/13mm wrenches. 8) And a pocket clip.

Knifeless with scissors is certainly tempting. Who's got a spare pair of BO Wave/Fuse/Blast scissors? Anyone?
I have got a BO small flat driver from a Blast which is better than the stock Rebar one for electrical work, so they might get swapped over. I'll prob keep saw and file, but transfer them over to the knife blade positions if I go knifeless. However, every time I pick it up I keep thinking "If I'm going to carry this, why not carry my BO Spirit S instead", so I don't know how much time and effort I'll spend on this to be honest
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login