Which 58?
-
@Lynn LeFey said:
@HarleyXJGuy. All you have to do is swap scales. Grab a used Rambler Manager M. Manager whatever and just swap around the scales. You can find used SAKs all over EBAY. If you like the idea of the LED then get one with the white LED (red ones suck) then swap out the pen with a standard scale. Easy and you get exactly what you want.
Huh? Are you saying the light is in the scales? Or?

Yes. The light is built into the scale of the 58mm line. The victorinox logo is the activation button. I've considered doing a scale swap, since they don't do one T&T slot and the light on any tool but the swisslight. I find a toothpick really useful, and the pen really... not. swapping a single scale would solve this problem, but would also require buying two tools. And for that cost, I'd rather just carry a 50 cent fauxton flashlight, and keep the scale with tweezers in it.
I hope this pic illustrates it clearly.

So the lite scale is just a little thicker?
Pretty sure I will not buy a lite SAK just to build another one but it is nice to know in case I find one cheap someday.
Just stick with my way more better Olight I3.
-
@HarleyXJGuy said:
So the lite scale is just a little thicker?It's about twice as thick as the standard scale. I don't know if you consider that 'just a little thicker'.
@HarleyXJGuy said:
Just stick with my way more better Olight I3.And that's about how I feel about it too. The light is a neat idea, and maybe useful when all else fails, but I think a dedicated light is a better way to go personally.
That means... like I said... get a Rambler. :D
-
@Lynn LeFey said:
It's about twice as thick as the standard scale. I don't know if you consider that 'just a little thicker'.Lame and umm no thanks.
@Lynn LeFey said:
And that's about how I feel about it too. The light is a neat idea, and maybe useful when all else fails, but I think a dedicated light is a better way to go personally.That means... like I said... get a Rambler. :D
Feels like talking to my wife sometimes with Lynn. Spend three hours getting to the point she made at the start of the conversation.

-
-
Looked through my 58's....a bunch of Classics, a 3M logo Bijou SD and these:
Signature II, Signature Lite and a Rambler.
-
I carry a Rambler :D
-
It's served me well the last couple years

-
Looked through my 58's....a bunch of Classics, a 3M logo Bijou SD and these:
Signature II, Signature Lite and a Rambler.
Do not think I have ever heard you talk about carrying a 58.
Just collectors?
The grandkids have dibs on them and my RA limits me to 84mm and larger knives so yes, just collect.
-
There is The One and The Only - MiniChamp :D Scale tools at your choice ... >:D


-
I never leave home without my Midnite Rogue: </topic/55347

But since you don't want pen or light, get a Rogue or a Rambler.
I actually prefer a Rogue:- NailCleaner - big Plus
- No Philips - medium Minus
- NailCleaner tip works on small Philips screws - small Plus
- Flat Screwdriver works pretty well on medium Philips screws - small Plus
+++--++=+++ for the Rogue :P
-
Looked through my 58's....a bunch of Classics, a 3M logo Bijou SD and these:
Signature II, Signature Lite and a Rambler.
Do not think I have ever heard you talk about carrying a 58.
Just collectors?
The grandkids have dibs on them and my RA limits me to 84mm and larger knives so yes, just collect.
OK then.
@Corwyn said:
I never leave home without my Midnite RogueBut since you don't want pen or light, get a Rogue or a Rambler.
I actually prefer a Rogue:- NailCleaner - big Plus
- No Philips - medium Minus
- NailCleaner tip works on small Philips screws - small Plus
- Flat Screwdriver works pretty well on medium Philips screws - small Plus
+++--++=+++ for the Rogue :P
Once I get home I might check out the light scale. Just want to be able to see them in person.
Good points on the Rogue vs. Rambler issue. Still undecided but the small phillips is by far the tool I need the most so Rambler is ahead by a nose or three.
-
Not carrying one of my cellidor SAKs because of SKTC and was wondering something.
Lets say I buy a Manager and do not want the tweezers. Could I put the toothpick in that slot?
-
@HarleyXJGuy said:
Not carrying one of my cellidor SAKs because of SKTC and was wondering something.Lets say I buy a Manager and do not want the tweezers. Could I put the toothpick in that slot?
Yep, it's interchangeable.
-
Not carrying one of my cellidor SAKs because of SKTC and was wondering something.
Lets say I buy a Manager and do not want the tweezers. Could I put the toothpick in that slot?
Yep, it's interchangeable.
So I need to switch the scale or just the toothpick in the tweezer spot?
So Manager it is for Harley.

-
Not carrying one of my cellidor SAKs because of SKTC and was wondering something.
Lets say I buy a Manager and do not want the tweezers. Could I put the toothpick in that slot?
**
Yep, it's interchangeable.**So I need to switch the scale or just the toothpick in the tweezer spot?
So Manager it is for Harley.


-
Not carrying one of my cellidor SAKs because of SKTC and was wondering something.
Lets say I buy a Manager and do not want the tweezers. Could I put the toothpick in that slot?
**
Yep, it's interchangeable.**So I need to switch the scale or just the toothpick in the tweezer spot?
So Manager it is for Harley.


Looks like the list got one more member.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
