Which Skinth?
-
@kkokkolis said:
I would like it to house up to a Multitool (Spirit or Charge probably, it would be nice to afford a Surge or a Swisstool) and a Swisschamp (or Harvester, or Mountaineer), plus some bits, driver extension and a Minimag Lite.Which one would you suggest?
Is it more difficult than I imagined?

-
Well, the point is, there's quite the size difference between a Swisschamp and a Harvester, it would be hard to find one that fits either comfortably. Same, though less severe, goes for the MT's you're naming..
For a Swisschamp and a Surge, you'd need a significantly larger Skinth than for, say, a Charge and a Harvester.
I'd say, just from the top of my head, if you get a Plus or XL, you **might **be able to fit a Harvester in a sidetube.
-
I should keep it small.
Say, a Spirit OR Charge, a Mountaineer OR Harvester, a LM bit kit AND driver extension AND a Minimag lite.
Forget anything else. -
I'm afraid if you get a Skinth for a 4" MT (like the Charge/Spirit), the side pockets won't be long enough for a SAK, I have an OG Skinth and that only fits 2-layer 84mm SAK's.
If you go for a 4,5"- class Skinth, you might be able to fit a normal-sized (though not too wide) SAK in the side pockets.
The Magnum might work (link), as you could put your main MT in the main pocket, and the SAK besides it, also in the main pocket.
Same goes for the 2XL Shield (link), Shields are build a lot more compact than the "normal" Skinths, so that might not be a bad choice in the end

-
Thank you.
I guess that one of the Shields might do it.
But I have to consider funcionality. When I go with my Teardrop Monosling I take my Swisschamp with me, as I did for 25 years. I have to see if I win in functionality with any shield combination, without getting so big that I would simply change to my older Monosling that houses the CatchAll with ease. -
Still thinking about it.
Let's see it again.- Victorinox Spirit (or Charge)
- 6mm normal Bit set (or Leatherman bitset)
- Victorinox Ratchet
- 6mm bit holder (Victorinox or Leatherman)
- Minimag Lite LED
- Something small with scissors (I have Mountaineer, Juice Pro, Squirt S4)
The Squirt is fine with me. It is small and has what is missing from the Spirit.
-
@bmot said:
I'm afraid if you get a Skinth for a 4" MT (like the Charge/Spirit), the side pockets won't be long enough for a SAK, I have an OG Skinth and that only fits 2-layer 84mm SAK's.If you go for a 4,5"- class Skinth, you might be able to fit a normal-sized (though not too wide) SAK in the side pockets.
The Magnum might work (link), as you could put your main MT in the main pocket, and the SAK besides it, also in the main pocket.
Same goes for the 2XL Shield (link), Shields are build a lot more compact than the "normal" Skinths, so that might not be a bad choice in the end

I don't like the sideburns of the Magnum, the 2XL looks fine.
Now I know my final setup.
- Victorinox Spirit (or Charge)
- 6mm normal Bit set (or Leatherman bitset)
- Victorinox Ratchet
- 6mm bit holder (Victorinox or Leatherman)
- Minimag Lite LED
- 2 layer Alox 93mm (blade, combo and scissors)
- Pocketwrench II
In the 2XL I think they all fit.

I think I'm going to hit it, to enjoy it around Easter!
-
Ordered a 2XL Shield and a M7 Toolet in black.
-
I have quite a few shields from Eric :D here is my Mondo Shield. The biggest issue I can see is your flashlight thats a 2x AA light correct? Here is a Ebay UltraFire AA lights that works well in this case but most use small AAA lights with shields becase they fit so well. The Victorinox wrench is kind of tall so it fits well in the Mondo but you might have a problem with the 2XL shield. Also if you get one pay a little extra for the brass buttons. They age so much better then the black painted ones that tend to get chipped.


-
I meant the Minimag lite that's 1xAAA.
About the buttons, I already ordered, can I change now?
And I use the ratchet from Victorinox, did I say wrench?
Anyway, I'll fit what fits, I have the CatchAll for all the rest. -
I am sure if you email them it might not be to late to make a little change to your order.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login