Inline phillips + pliers?
-
Well, besides the pliers and inline phillips, mainly the scissors and the combo tool. I've been trying to build a custom sak for a while now, but all my possible variations and compromises end up requiring me to chop up 2+ knives or carve custom tools beyond my skillset. This was just my latest attempt. The inline phillips and pliers are the only things I really NEED, so I was hoping maybe there was a model out there not listed on sakwiki I could settle for.
-
@Quartz said:
Well, besides the<u>** pliers and inline phillips, mainly the scissors and the combo tool**</u>... ... so I was hoping maybe there was a model out there not listed on sakwiki I could settle for.Yeoman Mechanic. But either option of tracking a +B one down or getting one built is "gonna cost ya".
-
Yeah, I already know all about that :/ If they were easier to get a hold of I'd probably just go with that even though it's not exactly what I'm looking for.
Explorer / Outdoorsman / Champion Plus / etc
The problem with doing it that way is buying two or three knives ends up being more expensive than just chopping up a SwissChamp.
-
Chopping up a Swisschamp won't get you a Combotool.
-
What exactly are you looking for, if a Yeoman Mechanic isn't it?
How about a Wenger S557?
-
Well, besides the<u>** pliers and inline phillips, mainly the scissors and the combo tool**</u>... ... so I was hoping maybe there was a model out there not listed on sakwiki I could settle for.
Yeoman Mechanic. But either option of tracking a +B one down or getting one built is "gonna cost ya".
Non-+B ones also exist:

-
I've actually been using a chopped up / remodeled s557 as my EDC for several years now, but I've come the conclusion that Wenger slipjoint pliers are more annoying then they're worth (and I miss the hook).
As for the combo tool, that was a pseudo-typo; I should've written "and maybe the combo tool". What I'm really looking for is some kind of flat screwdriver that can double as a prybar. I've never used a sak can opener once in my entire life, so I kinda want to ditch the standard opener layer. I know the combo tool isn't quite as strong as the bottle opener, but I was thinking about giving it a shot anyway maybe.
Honestly, neither the inline philips or combo tool are exactly what I'm looking for, but doing it 'right' means custom tools, so I was trying to see if there was a way I could build something with standard parts but not have it be stupid expensive.
-
@hiraethus said:
What exactly are you looking for, if a Yeoman Mechanic isn't it?Ideally I'd like something with:
- 3/4 scalloped main blade
- Wenger-style serrated scissors with no godforsaken leaf spring
- Vic-style pliers
- #1 & #2 phillips screwdrivers with a long reach
- large flat screwdriver
- small/precision flat screwdriver
- prybar
- marlin spike / general purpose poking stick
- hook
- industrial tweezers with long reach
- maybe a reamer?
== all this in a package 3-5 layers thick
Obviously a lot of these can be doubled up, like the large flathead screwdriver + prybar, long #1 phillips screwdriver + marlin spike, industrial tweezers + pliers, etc. You can also double up some of the screwdriver tips with something along the lines of the nail file tip on a classic SD.
In my mind what I envision is a 4 layer knife of roughly the following construction:
- main blade + prybar/flathead screwdriver thing + maybe a heavy duty phillips screwdriver on the back
- scissors + backside hook
- two butterfly fold screwdrivers =OR= one long saw-length screwdriver with a perfect combo tip + something on the back
- pliers
The screwdriver layer would be towards the middle so it's close to the natural center of rotation, and the pliers would be on an outside layer so they can be as flush as possible to the scales (holding the pliers at a steep angle makes it hard to work with thin washer nuts).
Neither Vic nor Wenger make anything like this out of the box, I can't assemble one out of parts, I don't have the skill/equipment to make custom tools properly, and I don't have the money to get someone to do it for me.... so I've been kinda wandering around trying to see if I can do something "good enough" for cheap.
-
Also, since I know someone is going to mention it, no the Cybertool bit driver doesn't work for me: it's WAAAY off center and I kept crossthreading screws trying to use it. It's also super thick and can't double as a marlin spike.
-
I´m overstepping the 91 mm limit by a full cm, but you could combine the linerlocking blade and can opener layer of any linerlocking 111 Vic with the plier and scissor layer off of a 111 slidelock (Hercules, for example) this would give you 2 different inline Phillips drivers, a locking screwdriver officially called "box opener" which is far better at prying than the Combo tool and a selection of blades (OHO, serrated and non serrated or PE non-OHO).
Just a thought. -
I bought a Hercules years ago thinking it would be my perfect knife, but it didn't really work out. I found the overall size and weight to be too much, and the closed height of the main blade and pliers (along with the overall body shape) was just too awkward, especially when doing anything with the screwdrivers. The smaller lozenge shape of the 91's is much more comfortable in my hands.
Besides that, liner-lock and slide-lock 111's use different pin sizes so I can't mix and match tools without messing around, and I don't have the equipment to do that properly.
As for the Troubleshooter, I've thought about trying to cut down a file or saw and turning it into my long-screwdriver thing, but I'm pretty sure the file would be too brittle to work as a screwdriver and the saw too flexy.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
