Is there
-
@micky d said:
@micky d said:
Uh, the link doesn't like me
Bugger, I take it your not a member of sosak then :-\
I joined that forum. Where do I pledge to sosak?
It's a hidden forum, but if you go to the forum marked SOSAK, and just leave a post there, then Def or one of the other Mod's will let you in :)
Just did that.
-
Ok it's just a waiting game now I'm affraid :-, shouldn't take too long though hopefully, but I uploaded the pictures in the link a few posts back :)
-
Of course my other "concept SAK" is a essentially an "all-screw driver" SAK using all the current drivers available along with the bit driver from the cybertool. Is it feasible to put a back spring philips and corkscrew on the same knife?
I take a lot of stuff apart. I like my screwdrivers.
-
Yes, but... its a bit of a kludge with a lot of wasted space. Here's a link to one to one of SporK60's rainy afternoon adventures ;)
http://www.knifeforums.com/forums/showpost.php?post/1554054/Me, I went with the simpler option...
... the NKB DL CT or Dinky Little CyberTool :)
Neil
-
@NKB said:
Me, I went with the simpler option...... the NKB DL CT or Dinky Little CyberTool :)
Neil
I didn't know you made one of those! I can't count the number of times I posted that someone should do exactly that. Great minds think alike! :)
Now that I have actually seen one, I have one word: "alox".... Heh? Heh? Make it a little skinnier and you can use it to compliment any other SAK you might want to pocket carry. Like a "Porta-Layer".
-
@micky d said:
But the can opener on the pioneer/soldier series makes a great phillips driver, unless the screw's really recessed :)
I haven't had too much luck with that. :-\ I'd rather have a "proper" phillips.
On smaller screws, my experience is the exact opposite. On my Explorer, I have started using the can opener philips head more than the actual inline philips.
The proper philips slips a lot more on smaller screws, because the very tip is squared off due to the way they are manufactured. The back-mounted philips don't have this problem and are normal philips heads, but you need more clearance because of their placement.
The can opener philips, on the other hand, has fits small philips perfectly and is also inline. It's no good for recessed screws though...
-
I think it was Terry (NutSAK) that said he used it like that a lot as well. I just don't feel it works as well for me.
Perhaps more testing is in order.

-
@gafftapegreenia said:
A Vic with an end mounted philips, and a top mounted awl like on the Farmer?You mean like this?

I am not aware of any non-alox top awls.
-
That has the phillips, but not the awl that is described.
Like you said, that specific awl is for the ALOX models only and there are no models in ALOX that include that specific phillips.
-
@Benner said:
I think it was Terry (NutSAK) that said he used it like that a lot as well. I just don't feel it works as well for me.Perhaps more testing is in order.

Perhaps it is because we all use the driver primarily for different types of work?
For example, I mainly work with small M3 and 6-32 screws for computers and electronics, etc. Those are the screws where the Vic inline philips tends to slip on me.
I became very used to using the can opener driver because of this, so I just use it all the time now. It did feel very weird at first, but it was primarily just a cognitive mismatch. :D
The slipping problem doesn't happen nearly as much when I use the inline driver on larger philips screws though, so I would likely prefer the inline philips now if I had been primarily dealing with larger screws all this time - especially if they were stiff too.
Different tools for different situations and people... :)
-
@max6166 said:
Different tools for different situations and people... :)Ain't that what it's all about!
That knife is still sitting on my workbench unpeened. There are 2 layers that don't behave well with blade rubbing and the like. I may have to remove 1 layer to make it all work correctly.
There are also 2 alox tools I don't have (sacking needle and the long skinny screwdriver) that aren't going to make it on the knife.
I've messed around with trying to get the Cybertool in the alox frame, but it ain't gonna happen from my bench anytime soon. Some tools just don't belong in alox i'm afraid...
I haven't really tried to get the alox awl on the cellidor knives, but that may work and allow the endmounted phillips to go with the awl on a cellidor model.
-
That DLCT is pretty neat!
So, anything to mate with the inline philips besides a magnifying glass?
-
@gafftapegreenia said:
That DLCT is pretty neat!So, anything to mate with the inline philips besides a magnifying glass?
The philips is sometimes paired with the flashlight, but I think the magnifying glass is a better option for most people. Much better to just throw a fauxton on your keychain if you want a light...
-
That's really what I figured.
And yet another question, what else pairs well with the alox awl besides the knife, or, conversely, what pairs well with the small blade beside the large blade. If I were to get a custom knife made I'd want the large and small knife blades. I'm amazed at how handy that little blade is.
-
What tool combination or goal are you are shooting for, and what SAKs do you currently have?
Is it that you currently have a Soldier or Farmer, etc. and are unsatisfied with the can opener/philips head?
-
It's basically that I'd like to take, say, a Farmer, and add an inline philips and the small blade. With that it seems there would be available space open that could be used for other implements. In my experience the can opener seems to work for some philips screw but not all.
-
Ah, I understand now. That's a very clear description.
I can't help you since I don't even have any alox yet and so have no idea what can go where, etc.
But there are definitely many in this thread and on SOSAK who know this stuff literally inside out, so I'll step aside and leave it to them. :D
-
Love the DLCT Neil :)
-
Cheers, its so small its almost cute :D ..... did I really
saywrite that out loud.
The reason it's named called Dinky Little is because of the inlay on the scale. I needed a solid 91mm scale with no slot to fit mirror to normal and my options were limited. I've no idea who's company logo that actually is

Anyone got an idea?
Neil
-
I'd never seen it before

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

