What's your latest Leatherman?
-
My latest is a pair of BO Rebar handles with pliers removed, and a BO CC head from a Fuse or Wave or something. To be honest I got these a while back but have only just fitted the CC head this weekend. Now I just have to decide what I'm doing with the loadout in the handles

-
@50ft-trad said:
My latest is a pair of BO Rebar handles with pliers removed, and a BO CC head from a Fuse or Wave or something. To be honest I got these a while back but have only just fitted the CC head this weekend. Now I just have to decide what I'm doing with the loadout in the handles
Knifeless, with scissors, large bit driver, no saw and 7/8/10/13mm wrenches. 8) And a pocket clip.

-
@50ft-trad said:
My latest is a pair of BO Rebar handles with pliers removed, and a BO CC head from a Fuse or Wave or something. To be honest I got these a while back but have only just fitted the CC head this weekend. Now I just have to decide what I'm doing with the loadout in the handles

Knifeless, with scissors, large bit driver, no saw and 7/8/10/13mm wrenches. 8) And a pocket clip.

Knifeless with scissors is certainly tempting. Who's got a spare pair of BO Wave/Fuse/Blast scissors? Anyone?
I have got a BO small flat driver from a Blast which is better than the stock Rebar one for electrical work, so they might get swapped over. I'll prob keep saw and file, but transfer them over to the knife blade positions if I go knifeless. However, every time I pick it up I keep thinking "If I'm going to carry this, why not carry my BO Spirit S instead", so I don't know how much time and effort I'll spend on this to be honest -
@Lynn LeFey said:
I picked up a Squirt E4 in pretty much new condition today at a gun and knife show.
I was a little shocked to see the full 3d philips head on it. It's very nice. I was expecting the flat phillips that I've seen on all the other Squirts.
It's a red Radio Shack branded one.
That one is the scissor model right?
E4 has wire strippers in place of the pliers/scissors.

Are there folks out here who are not electricians who do so much wire stripping they have to carry a tool like this all the time?
I keep this one with my CT Lite in my laptop bag, takes up less space compared to full sized wire strippers. I keep a Squirt ES4 (adds scissors, drops 3D phillips) in my guitar bag in case I need to fix any guitar pedals when I'm out. And honestly, I used these around the house more than regular wire strippers, well, because I like them :) But no, they don't get carried around all the time.
-
@50ft-trad said:
However, every time I pick it up I keep thinking "If I'm going to carry this, why not carry my BO Spirit S instead", so I don't know how much time and effort I'll spend on this to be honestI get that too. Pick up my Wave or Rebar, end up with my Spirit. Super Tool 300, Swisstool. :-\ I like the customisable nature of the Leatherman tools, and appreciate the tool loads, design and history; I just prefer the Victorinoxes.
-
Just received my bo mut,looks good to me
-
@50ft-trad said:
However, every time I pick it up I keep thinking "If I'm going to carry this, why not carry my BO Spirit S instead", so I don't know how much time and effort I'll spend on this to be honest
I get that too. Pick up my Wave or Rebar, end up with my Spirit. Super Tool 300, Swisstool. :-\ I like the customisable nature of the Leatherman tools, and appreciate the tool loads, design and history; I just prefer the Victorinoxes.
I mean if you do not dig you Rebar and it is stainless I could find it a new home for the right price.
Well parts of it anyhow.

-
@50ft-trad said:
However, every time I pick it up I keep thinking "If I'm going to carry this, why not carry my BO Spirit S instead", so I don't know how much time and effort I'll spend on this to be honest
I get that too. Pick up my Wave or Rebar, end up with my Spirit. Super Tool 300, Swisstool. :-\ I like the customisable nature of the Leatherman tools, and appreciate the tool loads, design and history; I just prefer the Victorinoxes.
As I see it ...
<u>Reasons to carry Rebar instead of Spirit S:</u>
Supremely better for cutting stranded wire
Better lanyard for working at heights and such
Cheaper<u>Reasons to carry Spirit S instead of Rebar:</u>
Much better ergonomics
Outboard tools - easier access and better orientated knives/saw
Pry tool
Chisel/scraper
More flat drivers
Better awl especially for narrower holes sizesBoth are good tools though, subject to user preferences. I can't see me choosing it as pocket tool of the day, even if I was to make it knifeless, so I might chuck it in my bike bag. It'll get very little (if any) use in there, but at least there's a half decent tool in the bag should I ever need one anywhere
-
@50ft-trad said:
@50ft-trad said:
However, every time I pick it up I keep thinking "If I'm going to carry this, why not carry my BO Spirit S instead", so I don't know how much time and effort I'll spend on this to be honest
I get that too. Pick up my Wave or Rebar, end up with my Spirit. Super Tool 300, Swisstool. :-\ I like the customisable nature of the Leatherman tools, and appreciate the tool loads, design and history; I just prefer the Victorinoxes.
As I see it ...
<u>Reasons to carry Rebar instead of Spirit S:</u>
Supremely better for cutting stranded wire
Better lanyard for working at heights and such
Cheaper<u>Reasons to carry Spirit S instead of Rebar:</u>
Much better ergonomics
Outboard tools - easier access and better orientated knives/saw
Pry tool
Chisel/scraper
More flat drivers
Better awl especially for narrower holes sizesBoth are good tools though, subject to user preferences. I can't see me choosing it as pocket tool of the day, even if I was to make it knifeless, so I might chuck it in my bike bag. It'll get very little (if any) use in there, but at least there's a half decent tool in the bag should I ever need one anywhere
Does the Spirit S have a bit driver like the Rebar? If not I would put that as a Rebar plus.
Sigh I am really looking hard at the Spirit so I am going to need you to talk me out of it now.
-
The Sprits (all versions) don't have the bit driver, but the Rebar doesn't either. The Rebar does have a very good phillips screwdriver - IMO better than the one on the Spirit. The Leatherman removeable bit driver fits the Rebar, but also fits the Spirit too. Win-win.

-
@hiraethus said:
The Sprits (all versions) don't have the bit driver, but the Rebar doesn't either. The Rebar does have a very good phillips screwdriver - IMO better than the one on the Spirit. The Leatherman removeable bit driver fits the Rebar, but also fits the Spirit too. Win-win.
That answers my question, thanks.
-
The Sprits (all versions) don't have the bit driver, but the Rebar doesn't either. The Rebar does have a very good phillips screwdriver - IMO better than the one on the Spirit. The Leatherman removeable bit driver fits the Rebar, but also fits the Spirit too. Win-win.

That answers my question, thanks.
Answers it in that you now want a Spirit as well?

-
The Sprits (all versions) don't have the bit driver, but the Rebar doesn't either. The Rebar does have a very good phillips screwdriver - IMO better than the one on the Spirit. The Leatherman removeable bit driver fits the Rebar, but also fits the Spirit too. Win-win.

That answers my question, thanks.
Answers it in that you now want a Spirit as well?

I think we all know the answer to that one already.
-
The Sprits (all versions) don't have the bit driver, but the Rebar doesn't either. The Rebar does have a very good phillips screwdriver - IMO better than the one on the Spirit. The Leatherman removeable bit driver fits the Rebar, but also fits the Spirit too. Win-win.

That answers my question, thanks.
I think the Phillips comparison may depend on the screws you encounter, so is a bit subjective really. I've never had an issue with the Phillips on the Spirit that I can recall, although I've never done a side by side comparison over a range of screws. Plus if you count the bit adaptor for the LM Phillips, you need to count the bit wrench or ratchet from Vic. I consider the bit wrench vastly superior, and it's great for high torque work and for where access is extremely limited and there isn't the clearance to get a full multitool in.
Similar comparisons could also be personal preference such as the Rebar has a wider faced file, which may mean quicker working for some, or less able to get in narrow spaces for others. The LM saw cuts on the pull stroke but is a thinner section and therefore has to remove less material than the bidirectional saw on the Spirit ... and so on
-
Not really mine... but I did pick this up for a friend in the Army today, had his name laser-engraved on the blade:
-
I'd have to say that the E4 or ES4 haven't been on my MT radar until viewing this thread the past few days. I haven't bought a MT in a while so it may be in order soon.
-
Just bought a Surge and an AL
-
@Irishgrouch said:
Just bought a Surge and an ALYou should join Lichbote and babolas club.
Also welcome.
-
Just bought a Surge and an AL
You should join Lichbote and babolas club.
Also welcome.
We don't welcome members who own tools with lesser grade metals, so peeps with AL and ALX Charges are out :D
Only joking, Iroshgrouch...AL is one sweet piece.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login