Fishing Multi Tool?
-
What type of fishing...
I live in Florida so I've done almost everything.
Bottom Bouncing, Fly fishing, Kite fishing, Cobia Fishing, Flounder Gigging, Bowfishing, etc.....
I have also pondered this thought.
My skeletool CX as my EDC will undoubtedly make the trip with me.
I wish there were companies out there that would make a very high quality plastic plier. With a knife in the handle.
Like a plastic LM with just a knife....and maybe a file. But that's it.
-
While I'm here....pictures I enjoy :)

First bass on my New Shimano CI4+

First SheepHead of 2014 caught by my Little Bro.
-
Those are some nice looking fish

Mostly I fish in the sea from jetties or wharves, using mono on a light weight spin combo. Sometimes I use soft plastic lures, sometimes I use regular bait.
Every now and then I'll fish in a river or lake but those times are few and far between as the sea is closer to home.
I have a $20 LM sidekick with wingman scissors on the way so that will probably be going in the tackle box. I prob won't bother attaching a lanyard to that one cos if it's lost or broken it's really no biggie!
-
Being on jetties I would still use a lanyard!
And I would vote against scissors and towards pliers. I'm not sure what your main catch is but there is nothing worse than digging a stinger out of a kingfish or a Sabiki out of a pinfish without pliers!
-
@NKlamerus said:
Being on jetties I would still use a lanyard!And I would vote against scissors and towards pliers. I'm not sure what your main catch is but there is nothing worse than digging a stinger out of a kingfish or a Sabiki out of a pinfish without pliers!
The Sidekick still has pliers, just swapped out the wood saw for Outside opening scissors.
-
Being on jetties I would still use a lanyard!
And I would vote against scissors and towards pliers. I'm not sure what your main catch is but there is nothing worse than digging a stinger out of a kingfish or a Sabiki out of a pinfish without pliers!
The Sidekick still has pliers, just swapped out the wood saw for Outside opening scissors.
Gotcha.
You plan on protecting it with anything? Mineral oil? WD?
-
Probably just some WD 40 but I've heard that it can put off fish when handling bait and such. I wonder if just a light spray after a good wipe down on the MT would be enough to transfer on to the bait though

-
@DazMechanical said:
Probably just some WD 40 but I've heard that it can put off fish when handling bait and such. I wonder if just a light spray after a good wipe down on the MT would be enough to transfer on to the bait though
I wouldn't worry about it. I've heard of people sending bass worms with WD....
-
*senting
-
I am not known to much fishing multitools. I only know much about the multitools which we can use for everyday carry.
-
My favorite is the Wingman. I like the outside scissors and spring loaded pliers. Of course the fact my wife works for a large retailer (think red, not blue)and told me they had them on closeout a few months back, did not hurt. After the employee discount it cost me $9. At that price I can afford to lose it!
-
My primary fishing tool is my wave, I've used it so much I can easily flick the pliers out with one hand. I also like to use my pstii for fishing and have brought that on a bunch of trips. Knife wise I usually bring my buck x-tract essential or a sak.
-
Wait, I'm confused. Why does Zoid carry a screwdriver salt fishing?
-
@Higgins617 said:
Wait, I'm confused. Why does Zoid carry a screwdriver salt fishing?Adjusting reels maybe?
I know the bail-less penn 706z reels always need adjusting. They are absolute tanks though, they are loud, ugly, heavy, and simple. But the only maitenece we've ever done was tighten the bail screw and replace the drag washers once every 5 years
-
Wait, I'm confused. Why does Zoid carry a screwdriver salt fishing?
Adjusting reels maybe?
I know the bail-less penn 706z reels always need adjusting. They are absolute tanks though, they are loud, ugly, heavy, and simple. But the only maitenece we've ever done was tighten the bail screw and replace the drag washers once every 5 years
I'm bad, all I do is oil slightly
Though I have had to fully disassemble a few second hand reels to get them straightened out. -
Wait, I'm confused. Why does Zoid carry a screwdriver salt fishing?
Adjusting reels maybe?
I know the bail-less penn 706z reels always need adjusting. They are absolute tanks though, they are loud, ugly, heavy, and simple. But the only maitenece we've ever done was tighten the bail screw and replace the drag washers once every 5 years
I'm bad, all I do is oil slightly
Though I have had to fully disassemble a few second hand reels to get them straightened out.Same here. My freshwater reels almost never get oiled. Especially the Shimano Stradics. They are built sealed so I'm not worried about them
The Salsmurfer reels are a WHOLE different ball game. I'd say the drags get done pretty often, but oiling and greasing is a monthly chore. Salsmurfer eats stainless like it's rebar
-
Wait, I'm confused. Why does Zoid carry a screwdriver salt fishing?
Adjusting reels maybe?
I know the bail-less penn 706z reels always need adjusting. They are absolute tanks though, they are loud, ugly, heavy, and simple. But the only maitenece we've ever done was tighten the bail screw and replace the drag washers once every 5 years
I'm bad, all I do is oil slightly
Though I have had to fully disassemble a few second hand reels to get them straightened out.Same here. My freshwater reels almost never get oiled. Especially the Shimano Stradics. They are built sealed so I'm not worried about them
The Salsmurfer reels are a WHOLE different ball game. I'd say the drags get done pretty often, but oiling and greasing is a monthly chore. Salsmurfer eats stainless like it's rebar
Just had me a bowl of rebar this morning :D I feel you though, I have a basic Penn Fierce as I don't get out there very much, probably 5 times a year. But you have me ready to go oil it now.
My freshwater is a Shimano Sahara, my first higher quality reel, and I love it.
-
[quote author=Higgins617 link=topic=55869.msg1022894#msg1022894 date=1421003761]
Wait, I'm confused. Why does Zoid carry a screwdriver salt fishing?Adjusting reels maybe?
I know the bail-less penn 706z reels always need adjusting. They are absolute tanks though, they are loud, ugly, heavy, and simple. But the only maitenece we've ever done was tighten the bail screw and replace the drag washers once every 5 years
I'm bad, all I do is oil slightly
Though I have had to fully disassemble a few second hand reels to get them straightened out.Same here. My freshwater reels almost never get oiled. Especially the Shimano Stradics. They are built sealed so I'm not worried about them
The Salsmurfer reels are a WHOLE different ball game. I'd say the drags get done pretty often, but oiling and greasing is a monthly chore. Salsmurfer eats stainless like it's rebar
Just had me a bowl of rebar this morning :D I feel you though, I have a basic Penn Fierce as I don't get out there very much, probably 5 times a year. But you have me ready to go oil it now.
My freshwater is a Shimano Sahara, my first higher quality reel, and I love it.
[/quote]
I've always wanted a Sahara for a travel reel.All my freshwater spinning reels are the Shimano Stradic CI4+ models.
They are 275 a peice, just way to much to trust everyone when your camping or leaving in a truck bed!
I've never owned a fierce penn either, all the salsmurfer rods are either 550s, spinfisher Vs, or the original 706z and 704s.
Unless we head out on the boat, in which case it's Penn Internationals and Senators
-
[quote author=NKlamerus link=topic=55869.msg1022897#msg1022897 date=1421004095]
[quote author=Higgins617 link=topic=55869.msg1022894#msg1022894 date=1421003761]
Wait, I'm confused. Why does Zoid carry a screwdriver salt fishing?Adjusting reels maybe?
I know the bail-less penn 706z reels always need adjusting. They are absolute tanks though, they are loud, ugly, heavy, and simple. But the only maitenece we've ever done was tighten the bail screw and replace the drag washers once every 5 years
I'm bad, all I do is oil slightly
Though I have had to fully disassemble a few second hand reels to get them straightened out.Same here. My freshwater reels almost never get oiled. Especially the Shimano Stradics. They are built sealed so I'm not worried about them
The Salsmurfer reels are a WHOLE different ball game. I'd say the drags get done pretty often, but oiling and greasing is a monthly chore. Salsmurfer eats stainless like it's rebar
Just had me a bowl of rebar this morning :D I feel you though, I have a basic Penn Fierce as I don't get out there very much, probably 5 times a year. But you have me ready to go oil it now.
My freshwater is a Shimano Sahara, my first higher quality reel, and I love it.
[/quote]
I've always wanted a Sahara for a travel reel.All my freshwater spinning reels are the Shimano Stradic CI4+ models.
They are 275 a peice, just way to much to trust everyone when your camping or leaving in a truck bed!
I've never owned a fierce penn either, all the salsmurfer rods are either 550s, spinfisher Vs, or the original 706z and 704s.
Unless we head out on the boat, in which case it's Penn Internationals and Senators
[/quote]Heck, rounding up 275 for much of anything would be very hard for me, but I spread myself thin with hobbies :D. My bike was the most I've ever spent on myself, fishing is more of my wind-down at the end of the day. Gimme an Ugly Stik and any half decent spinning reel and you won't hear a complaint out of me. Bikes are a different story, unfortunately due to my size and riding style, cheaper parts tend not to live long lives under my command.
-
[quote author=Higgins617 link=topic=55869.msg1022903#msg1022903 date=1421005144]
[quote author=NKlamerus link=topic=55869.msg1022897#msg1022897 date=1421004095]
[quote author=Higgins617 link=topic=55869.msg1022894#msg1022894 date=1421003761]
Wait, I'm confused. Why does Zoid carry a screwdriver salt fishing?Adjusting reels maybe?
I know the bail-less penn 706z reels always need adjusting. They are absolute tanks though, they are loud, ugly, heavy, and simple. But the only maitenece we've ever done was tighten the bail screw and replace the drag washers once every 5 years
I'm bad, all I do is oil slightly
Though I have had to fully disassemble a few second hand reels to get them straightened out.Same here. My freshwater reels almost never get oiled. Especially the Shimano Stradics. They are built sealed so I'm not worried about them
The Salsmurfer reels are a WHOLE different ball game. I'd say the drags get done pretty often, but oiling and greasing is a monthly chore. Salsmurfer eats stainless like it's rebar
Just had me a bowl of rebar this morning :D I feel you though, I have a basic Penn Fierce as I don't get out there very much, probably 5 times a year. But you have me ready to go oil it now.
My freshwater is a Shimano Sahara, my first higher quality reel, and I love it.
[/quote]
I've always wanted a Sahara for a travel reel.All my freshwater spinning reels are the Shimano Stradic CI4+ models.
They are 275 a peice, just way to much to trust everyone when your camping or leaving in a truck bed!
I've never owned a fierce penn either, all the salsmurfer rods are either 550s, spinfisher Vs, or the original 706z and 704s.
Unless we head out on the boat, in which case it's Penn Internationals and Senators
[/quote]Heck, rounding up 275 for much of anything would be very hard for me, but I spread myself thin with hobbies :D. My bike was the most I've ever spent on myself, fishing is more of my wind-down at the end of the day. Gimme an Ugly Stik and any half decent spinning reel and you won't hear a complaint out of me. Bikes are a different story, unfortunately due to my size and riding style, cheaper parts tend not to live long lives under my command.
[/quote]
That's one thing I've never got into, biking!For me it's the opposite. I'm always battling myself too.
"I spent 275 bucks on a reel, I can't destroy it"
But on the other hand "it costs so much because it's built to handle abuse"
I guess bikes kinda HAVE to be used though
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
