Charge tti
-
[quote author=zoidberg link=topic=56419.msg1007702#msg1007702 date=1418625751]
[quote author=HarleyXJGuy link=topic=56419.msg1007697#msg1007697 date=1418624701]
The regular Wave style is the best.
Not into paying more for the same tool.
It's not the same tool, it's a better one.

Oh yeah I forgot, it has the same tools but costs more so it has to be better.

Cutting hook, crimper and s30v blade. I've never bought a brand new MT so could care less re price.
Actually that's not true, I just bought a Gerber Fisherman recently but that will be broken down for parts.My Wave has all that stuff.
Cutting hook, I call it a knife.
Crimper also known as pliers.
S30V blades are for sale everywhere for a few dollars.
@babola said:
Oh the venerable MUT...there's simply nothing like it! 8)Well except the ST 300 and Surge which are both better.

Just messing with you and I hope you like your MUT.
[/quote]Harley and his over-simplistic view of the World, eh?
;)
[/quote]Guilty.
It is an Army thing. Either you are tying to kill me or you are not.
-
Some posts before i read about the hacked leatherman Recharge; is it anything for you americans only, or is it possible also to buy from here? (Italy)
-
@balvenie said:
Some posts before i read about the hacked leatherman Recharge; is it anything for you americans only, or is it possible also to buy from here? (Italy)Texas Tool Crafters sell through their ebay page, direct link to a listing here.
-
This has a sense if you use the wire cutters on hard wire a lot. I use it rarely and mostly cut thin/soft wire or cables, so I never felt the need for that. I wonder how much it is used in other cases, from people that made the mod or bought the new Surge, Rebar etc.
-
@kkokkolis said:
This has a sense if you use the wire cutters on hard wire a lot. I use it rarely and mostly cut thin/soft wire or cables, so I never felt the need for that. I wonder how much it is used in other cases, from people that made the mod or bought the new Surge, Rebar etc.I use the replaceable wire cutters all the time. I carry the tools with them far more than those without.
-
@kkokkolis said:
This has a sense if you use the wire cutters on hard wire a lot. I use it rarely and mostly cut thin/soft wire or cables, so I never felt the need for that. I wonder how much it is used in other cases, from people that made the mod or bought the new Surge, Rebar etc.I use it enough that my Surge needs new cutters soon.
-
This has a sense if you use the wire cutters on hard wire a lot. I use it rarely and mostly cut thin/soft wire or cables, so I never felt the need for that. I wonder how much it is used in other cases, from people that made the mod or bought the new Surge, Rebar etc.
I use it enough that my Surge needs new cutters soon.
I'll have to order some in soon for my Charge, fish hooks were super tough.
-
This has a sense if you use the wire cutters on hard wire a lot. I use it rarely and mostly cut thin/soft wire or cables, so I never felt the need for that. I wonder how much it is used in other cases, from people that made the mod or bought the new Surge, Rebar etc.
I use it enough that my Surge needs new cutters soon.
I'll have to order some in soon for my Charge, fish hooks were super tough.
The thing I've dealt with that is a total killer is bike spokes, I only ever go after them with my Tough Tool as the thing is already beat to smurf.
-
This has a sense if you use the wire cutters on hard wire a lot. I use it rarely and mostly cut thin/soft wire or cables, so I never felt the need for that. I wonder how much it is used in other cases, from people that made the mod or bought the new Surge, Rebar etc.
I use it enough that my Surge needs new cutters soon.
I'll have to order some in soon for my Charge, fish hooks were super tough.
The thing I've dealt with that is a total killer is bike spokes, I only ever go after them with my Tough Tool as the thing is already beat to smurf.
Noted, thank you.

-
I never handled a Wave but its scales are similar to a Surge's that cut into the palm unless treated with a Dremmel. The Charge has better scales, not in the way the Spirit has, but they are good. I use the hook, although a knife can do similar work and used the crimper a couple of times but I haven't experienced the way TTi's steel is better than regular 4## steels. I agree that all these shouldn't double the price but this is a Multitoolmaniacs forum and people here are prepared to pay. Still, multitools and SAKs are much cheaper than accessories of other hobbies such as optics, guns, electronics, vehicles etc. I think one can afford the "best" multitool much easier than the "best" telescope, carbine, HiFi etc. If not, the Wave or even the PST will do the job fine anyway.
Agree. Wave is no match to a Charge when it comes to fit and finish of handles/scales at least, let alone extra features and materials.
Wave handles dig into the palm of your hand (older pre 2010 runs even more, as their handles flare out) and this is where Charge is a Godsend.I always maintained that if you get the Charge TTi, tune it up so all tools open/close smoothly (polish the washers and spacers, oil the pivots) there isn't anything quite like it in MT world. No Swisstools, no Spirits...nothing. 8)
Not being very clear, you are trying to say you like the Charge TTI or?
Wave handles dig into your hands? I have not noticed that but I do work so my hands are tough.

-
Regarding the replacable cutters on the Recharge. Multitools are not very good at doing heavy jobs all the time. If I had to fence a field you bet I'll have a proper pair of wire cutters with me.
But that one time when you have no choice but to cut through some barbed wire, chain link fence or big game snares. You will cry with each cut knowing (and observing) your MT is getting damaged.I like to have replacable cutters so if I have to use my Rechage hard, I know it won't cause irreversible damage.
-
Wave handles dig into your hands? I have not noticed that but I do work so my hands are tough.

I do a mental job, the same I was doing in the army (Army Medical Corps, served Army Air Wing and Special Forces Training Center). My mind is hard, too hard for your poking stick.

-
Wave handles dig into your hands? I have not noticed that but I do work so my hands are tough.

I do a mental job, the same I was doing in the army (Army Medical Corps, served Army Air Wing and Special Forces Training Center). My mind is hard, too hard for your poking stick.


-
Wave handles dig into your hands? I have not noticed that but I do work so my hands are tough.

I do a mental job, the same I was doing in the army (Army Medical Corps, served Army Air Wing and Special Forces Training Center). My mind is hard, too hard for your poking stick.

Mind yes, girl hands not so much.

Just messing with you, someone has to do the thinking around here.
-
I never handled a Wave but its scales are similar to a Surge's that cut into the palm unless treated with a Dremmel. The Charge has better scales, not in the way the Spirit has, but they are good. I use the hook, although a knife can do similar work and used the crimper a couple of times but I haven't experienced the way TTi's steel is better than regular 4## steels. I agree that all these shouldn't double the price but this is a Multitoolmaniacs forum and people here are prepared to pay. Still, multitools and SAKs are much cheaper than accessories of other hobbies such as optics, guns, electronics, vehicles etc. I think one can afford the "best" multitool much easier than the "best" telescope, carbine, HiFi etc. If not, the Wave or even the PST will do the job fine anyway.
Agree. Wave is no match to a Charge when it comes to fit and finish of handles/scales at least, let alone extra features and materials.
Wave handles dig into the palm of your hand (older pre 2010 runs even more, as their handles flare out) and this is where Charge is a Godsend.I always maintained that if you get the Charge TTi, tune it up so all tools open/close smoothly (polish the washers and spacers, oil the pivots) there isn't anything quite like it in MT world. No Swisstools, no Spirits...nothing. 8)
Not being very clear, you are trying to say you like the Charge TTI or?
Wave handles dig into your hands? I have not noticed that but I do work so my hands are tough.

I thought my post was self-explanatory, sorry.
Is it the 'army thing', once again?

-
I never handled a Wave but its scales are similar to a Surge's that cut into the palm unless treated with a Dremmel. The Charge has better scales, not in the way the Spirit has, but they are good. I use the hook, although a knife can do similar work and used the crimper a couple of times but I haven't experienced the way TTi's steel is better than regular 4## steels. I agree that all these shouldn't double the price but this is a Multitoolmaniacs forum and people here are prepared to pay. Still, multitools and SAKs are much cheaper than accessories of other hobbies such as optics, guns, electronics, vehicles etc. I think one can afford the "best" multitool much easier than the "best" telescope, carbine, HiFi etc. If not, the Wave or even the PST will do the job fine anyway.
Agree. Wave is no match to a Charge when it comes to fit and finish of handles/scales at least, let alone extra features and materials.
Wave handles dig into the palm of your hand (older pre 2010 runs even more, as their handles flare out) and this is where Charge is a Godsend.I always maintained that if you get the Charge TTi, tune it up so all tools open/close smoothly (polish the washers and spacers, oil the pivots) there isn't anything quite like it in MT world. No Swisstools, no Spirits...nothing. 8)
Not being very clear, you are trying to say you like the Charge TTI or?
Wave handles dig into your hands? I have not noticed that but I do work so my hands are tough.

I thought my post was self-explanatory, sorry.
Don't be sorry just do better next time.
-
[quote author=kkokkolis link=topic=56419.msg1008211#msg1008211 date=1418680417]
I never handled a Wave but its scales are similar to a Surge's that cut into the palm unless treated with a Dremmel. The Charge has better scales, not in the way the Spirit has, but they are good. I use the hook, although a knife can do similar work and used the crimper a couple of times but I haven't experienced the way TTi's steel is better than regular 4## steels. I agree that all these shouldn't double the price but this is a Multitoolmaniacs forum and people here are prepared to pay. Still, multitools and SAKs are much cheaper than accessories of other hobbies such as optics, guns, electronics, vehicles etc. I think one can afford the "best" multitool much easier than the "best" telescope, carbine, HiFi etc. If not, the Wave or even the PST will do the job fine anyway.Agree. Wave is no match to a Charge when it comes to fit and finish of handles/scales at least, let alone extra features and materials.
Wave handles dig into the palm of your hand (older pre 2010 runs even more, as their handles flare out) and this is where Charge is a Godsend.I always maintained that if you get the Charge TTi, tune it up so all tools open/close smoothly (polish the washers and spacers, oil the pivots) there isn't anything quite like it in MT world. No Swisstools, no Spirits...nothing. 8)
Not being very clear, you are trying to say you like the Charge TTI or?
Wave handles dig into your hands? I have not noticed that but I do work so my hands are tough.

I thought my post was self-explanatory, sorry.
Don't be sorry just do better next time.
[/quote]Cool, no probs. I'll make sure I go slow next time.
-
[quote author=babola link=topic=56419.msg1008347#msg1008347 date=1418695965]
[quote author=kkokkolis link=topic=56419.msg1008211#msg1008211 date=1418680417]
I never handled a Wave but its scales are similar to a Surge's that cut into the palm unless treated with a Dremmel. The Charge has better scales, not in the way the Spirit has, but they are good. I use the hook, although a knife can do similar work and used the crimper a couple of times but I haven't experienced the way TTi's steel is better than regular 4## steels. I agree that all these shouldn't double the price but this is a Multitoolmaniacs forum and people here are prepared to pay. Still, multitools and SAKs are much cheaper than accessories of other hobbies such as optics, guns, electronics, vehicles etc. I think one can afford the "best" multitool much easier than the "best" telescope, carbine, HiFi etc. If not, the Wave or even the PST will do the job fine anyway.Agree. Wave is no match to a Charge when it comes to fit and finish of handles/scales at least, let alone extra features and materials.
Wave handles dig into the palm of your hand (older pre 2010 runs even more, as their handles flare out) and this is where Charge is a Godsend.I always maintained that if you get the Charge TTi, tune it up so all tools open/close smoothly (polish the washers and spacers, oil the pivots) there isn't anything quite like it in MT world. No Swisstools, no Spirits...nothing. 8)
Not being very clear, you are trying to say you like the Charge TTI or?
Wave handles dig into your hands? I have not noticed that but I do work so my hands are tough.

I thought my post was self-explanatory, sorry.
Don't be sorry just do better next time.
[/quote]Cool, no probs. I'll make sure I go slow next time.
[/quote]Wait did you just imply that I am slo......what was I saying again?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login