Show off your Sak mod's!
-
My first mod with so many layers and tools.
-
Nice one ALM

-
After I saw Syph's work on the 84mm scissors, I had to try this as well. :D

Really nice!
Nice! The screw in the set I had were so loose the scissors wouldnt even cut, so I didnt have much to lose and was very happy with the upgrade.

I like it. Guess this would also work with a bunch of 58mm scissors I have with screw pivots
-
@ALM said:
My first mod with so many layers and tools.Black with Red Shield Alox with a very nice tool selection, good job man.
After I saw Syph's work on the 84mm scissors, I had to try this as well. :D

Really nice!
Nice! The screw in the set I had were so loose the scissors wouldnt even cut, so I didnt have much to lose and was very happy with the upgrade.

I like it. Guess this would also work with a bunch of 58mm scissors I have with screw pivots
I do not understand what is going on here. Why are you replacing the pivot?
-
@HarleyXJGuy said:
I do not understand what is going on here. Why are you replacing the pivot?84mm scissors all feature a screwed down construction. Sometimes the screw loosens itself after every cut. I even tried Loctite, but it didn't help.
-
I do not understand what is going on here. Why are you replacing the pivot?
84mm scissors all feature a screwed down construction. Sometimes the screw loosens itself after every cut. I even tried Loctite, but it didn't help.
Did you try red or green loctite?
-
I do not understand what is going on here. Why are you replacing the pivot?
84mm scissors all feature a screwed down construction. Sometimes the screw loosens itself after every cut. I even tried Loctite, but it didn't help.
Ah ok I see.
-
I've had several pairs of 84mm with screws and never had a problem

-
In the past I have tightened the pivot screw by centrepunching the back side of it. Or lightly peening.
-
In the past I have tightened the pivot screw by centrepunching the back side of it. Or lightly peening.
"center punching the back side" sounds dirty.
And fun.
No as dirty sounding as "dot punching the backside" which was the first draft...
-
@tattoosteve99 said:
I've had several pairs of 84mm with screws and never had a problem
I've stonewashed several pairs and never had a problem after. I do like the look of the brass over the screw.
-
In the past I have tightened the pivot screw by centrepunching the back side of it. Or lightly peening.
"center punching the back side" sounds dirty.
And fun.
No as dirty sounding as "dot punching the backside" which was the first draft...
Lol. You are right.
PTR do you make custom SAKs for other people or just yourself as a hobby?
-
In the past I have tightened the pivot screw by centrepunching the back side of it. Or lightly peening.
"center punching the back side" sounds dirty.
And fun.
No as dirty sounding as "dot punching the backside" which was the first draft...
Lol. You are right.
PTR do you make custom SAKs for other people or just yourself as a hobby?
I've done a few jobs for people, but poor availability of good price donors combined with high postage rates generally make it economically in-viable.
-
PTR do you make custom SAKs for other people or just yourself as a hobby?
I've done a few jobs for people, but poor availability of good price donors combined with high postage rates generally make it economically in-viable.
Australia Post is a bloody rip off. However, if someone sends you donor knives and/or parts and is happy to pay labour and return postage, then you are happy to do the mods?
-
I am a proud owner of quite a few PTR Originals (but missed out on his custom Damascus solo :( ). His work is highly recommended, especially his scale mods and more creative models. He did originate the Wenger tools in 84mm Vic after all!
-
PTR do you make custom SAKs for other people or just yourself as a hobby?
I've done a few jobs for people, but poor availability of good price donors combined with high postage rates generally make it economically in-viable.
Australia Post is a bloody rip off. However, if someone sends you donor knives and/or parts and is happy to pay labour and return postage, then you are happy to do the mods?
It depends on the mod. I'll try all kinds of crazy smurf on my own gear, but want to be sure of doing a high quality job for "customers". I'm not too worried about things like semi obscured nail nicks or slightly soft snap if it's on a FrankenSAK that I have thrown together for S&Gs. But tend to worry about things not being up to scratch for other people.
Case in point (albeit on a larger scale) I made this table for some friends and even if it is in a "rustic" style I was totally stressed that it wasn't good enough.


okay, they love it and paid me more than I asked for, but I still stress along the way.
-
I sympathise with you PTRSAK, after many stressful years of carpentry, with many happy customers, I decided to leave the job and I'm now an estate manager at a retirement complex and lo and behold, no more stress. I still love doing woodwork at home though.
The table looks beautiful by the way! If there was only a way to silence that pesky internal critic......
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login