Babola's Acid Wave project
-
@HarleyXJGuy said:
The awl has to be messed with for it to fit on a Wave?Yes, by about 1mm that needs to be 'shaved' off the top arch. Otherwise the pliers head interferes with it on closing the handles leaving an unsightly gap between the handles.
Strangely enough, I prefer this thin-profile awl look to the original one. ::)
-
The awl has to be messed with for it to fit on a Wave?
Yes, by about 1mm that needs to be 'shaved' off the top arch. Otherwise the pliers head interferes with it on closing the handles leaving an unsightly gap between the handles.
Strangely enough, I prefer this thin-profile awl look to the original one. ::)
So you do not need to mess with the sharp part, you can shave it off the back?
-
The awl has to be messed with for it to fit on a Wave?
Yes, by about 1mm that needs to be 'shaved' off the top arch. Otherwise the pliers head interferes with it on closing the handles leaving an unsightly gap between the handles.
Strangely enough, I prefer this thin-profile awl look to the original one. ::)
So you do not need to mess with the sharp part, you can shave it off the back?
Correct. The total awl's length is unchanged.
-
The awl has to be messed with for it to fit on a Wave?
Yes, by about 1mm that needs to be 'shaved' off the top arch. Otherwise the pliers head interferes with it on closing the handles leaving an unsightly gap between the handles.
Strangely enough, I prefer this thin-profile awl look to the original one. ::)
So you do not need to mess with the sharp part, you can shave it off the back?
Correct. The total awl's length is unchanged.
Thanks.
-
The awl has to be messed with for it to fit on a Wave?
Yes, by about 1mm that needs to be 'shaved' off the top arch. Otherwise the pliers head interferes with it on closing the handles leaving an unsightly gap between the handles.
Strangely enough, I prefer this thin-profile awl look to the original one. ::)
I like the slimmer version of the awl too! :D and there's certainly some satisfaction to be had when you do another test fit and the handles close nicely without that gap. ;)
really nice work on this mod... I love the way it turned out!

just out of curiosity -- do the handles have a different texture to them now? I had the handles cerakoted for one of my Wave mods, and I really liked the feel of the handles after cerakoting.
-
The awl has to be messed with for it to fit on a Wave?
Yes, by about 1mm that needs to be 'shaved' off the top arch. Otherwise the pliers head interferes with it on closing the handles leaving an unsightly gap between the handles.
Strangely enough, I prefer this thin-profile awl look to the original one. ::)
I like the slimmer version of the awl too! :D and there's certainly some satisfaction to be had when you do another test fit and the handles close nicely without that gap. ;)
really nice work on this mod... I love the way it turned out!

just out of curiosity -- do the handles have a different texture to them now? I had the handles cerakoted for one of my Wave mods, and I really liked the feel of the handles after cerakoting.
Thanks M

The awl now reminds me of the SAK awl a little bit, not that I was going for that look but it turned out that way in the end.
The texture is now actually very smooth, silky even. After the initial acid treatment the feel is rough, almost sandpaper 1000 grit like. However, stone washing process de-burrs the edges a little and smooths out the surface, so it's almost slippery on touch now :)
-
The awl has to be messed with for it to fit on a Wave?
Yes, by about 1mm that needs to be 'shaved' off the top arch. Otherwise the pliers head interferes with it on closing the handles leaving an unsightly gap between the handles.
Strangely enough, I prefer this thin-profile awl look to the original one. ::)
I like the slimmer version of the awl too! :D and there's certainly some satisfaction to be had when you do another test fit and the handles close nicely without that gap. ;)
really nice work on this mod... I love the way it turned out!

just out of curiosity -- do the handles have a different texture to them now? I had the handles cerakoted for one of my Wave mods, and I really liked the feel of the handles after cerakoting.
Breeze you have any extra Rebars laying around?

-
The awl has to be messed with for it to fit on a Wave?
Yes, by about 1mm that needs to be 'shaved' off the top arch. Otherwise the pliers head interferes with it on closing the handles leaving an unsightly gap between the handles.
Strangely enough, I prefer this thin-profile awl look to the original one. ::)
I like the slimmer version of the awl too! :D and there's certainly some satisfaction to be had when you do another test fit and the handles close nicely without that gap. ;)
really nice work on this mod... I love the way it turned out!

just out of curiosity -- do the handles have a different texture to them now? I had the handles cerakoted for one of my Wave mods, and I really liked the feel of the handles after cerakoting.
Thanks M

The awl now reminds me of the SAK awl a little bit, not that I was going for that look but it turned out that way in the end.
The texture is now actually very smooth, silky even. After the initial acid treatment the feel is rough, almost sandpaper 1000 grit like. However, stone washing process de-burrs the edges a little and smooths out the surface, so it's almost slippery on touch now :)
very cool.
hopefully it doesn't slip right out of your hands... it would be a shame to lose that beauty. :) -
The awl has to be messed with for it to fit on a Wave?
Yes, by about 1mm that needs to be 'shaved' off the top arch. Otherwise the pliers head interferes with it on closing the handles leaving an unsightly gap between the handles.
Strangely enough, I prefer this thin-profile awl look to the original one. ::)
I like the slimmer version of the awl too! :D and there's certainly some satisfaction to be had when you do another test fit and the handles close nicely without that gap. ;)
really nice work on this mod... I love the way it turned out!

just out of curiosity -- do the handles have a different texture to them now? I had the handles cerakoted for one of my Wave mods, and I really liked the feel of the handles after cerakoting.
Breeze you have any extra Rebars laying around?

are you after the head or the guts? ;) I have several Rebar corpses around here in various stages of disassembly. :D
I try to stock up on Rebars whenever I see them at a discounted price, but I don't think I have any extras right now.
-
[quote author=HarleyXJGuy link=topic=56530.msg1012173#msg1012173 date=1419215062]
The awl has to be messed with for it to fit on a Wave?Yes, by about 1mm that needs to be 'shaved' off the top arch. Otherwise the pliers head interferes with it on closing the handles leaving an unsightly gap between the handles.
Strangely enough, I prefer this thin-profile awl look to the original one. ::)
I like the slimmer version of the awl too! :D and there's certainly some satisfaction to be had when you do another test fit and the handles close nicely without that gap. ;)
really nice work on this mod... I love the way it turned out!

just out of curiosity -- do the handles have a different texture to them now? I had the handles cerakoted for one of my Wave mods, and I really liked the feel of the handles after cerakoting.
Breeze you have any extra Rebars laying around?

are you after the head or the guts? ;) I have several Rebar corpses around here in various stages of disassembly. :D
I try to stock up on Rebars whenever I see them at a discounted price, but I don't think I have any extras right now.
[/quote]You know the usual suspects, head and awl.
Looking to have someone cough you do the conversion when I get back to the states early next year. Just getting the parts together for now so no rush on it.
-
[quote author=babola link=topic=56530.msg1012187#msg1012187 date=1419216539]
[quote author=HarleyXJGuy link=topic=56530.msg1012173#msg1012173 date=1419215062]
The awl has to be messed with for it to fit on a Wave?Yes, by about 1mm that needs to be 'shaved' off the top arch. Otherwise the pliers head interferes with it on closing the handles leaving an unsightly gap between the handles.
Strangely enough, I prefer this thin-profile awl look to the original one. ::)
I like the slimmer version of the awl too! :D and there's certainly some satisfaction to be had when you do another test fit and the handles close nicely without that gap. ;)
really nice work on this mod... I love the way it turned out!

just out of curiosity -- do the handles have a different texture to them now? I had the handles cerakoted for one of my Wave mods, and I really liked the feel of the handles after cerakoting.
Breeze you have any extra Rebars laying around?

are you after the head or the guts? ;) I have several Rebar corpses around here in various stages of disassembly. :D
I try to stock up on Rebars whenever I see them at a discounted price, but I don't think I have any extras right now.
[/quote]You know the usual suspects, head and awl.
Looking to have someone cough you do the conversion when I get back to the states early next year. Just getting the parts together for now so no rush on it.
[/quote]I'll keep an eye out for you.

-
Added the pocket clip in matching acid-wash finish. :)

-
Looks good!
Nate
-
Thanks guys

-
Congrats babola, i love you're project.

-
Very nice

What's the effect of skipping the acid bit and just chucking the wave into a rumbler machine?
We have 4 at work each with different sized stones.Am I correct in thinking it will just come out flat matt grey??
-
That really came out nice. Not a fan of the tool load out, but that look is spectacular.
Sent from my iPad using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




