Single-wing Wingman
-
With some work you could probably have two saws on those pliers.
-
or a saw and scissors ::)
-
Buy 2 get 1 free! Nice! You can never have too many pliers in your or family's vehicle
-
My contribution - the Leatherman Bantam.
I like the look and feel of this mod, but I don't love the drivers, package opener, etc. Besides, I encounter more beer bottles than loose screws.

-
@50ft-trad said:
@Lynn LeFey said:
@Kampfer said:
Agree, it is cheaper than Lego's and more fun.Ain't THAT the truth! Lego's are crazy expensive.
Also... Sidekick's are down to $18 at Home Depot!
Except in the UK Wingman is £30 and Sidekick £45 :ahhh. Must be an expensive karibiner. Too expensive to experiment with. Who here would buy Sidekick at £45 when Rebar is available for £50?
Agreed! a Rebar is several times as good as a Sidekick, and at very little cost difference over here
:ahhh
I'd never realised they were that much! I've bought all of mine second hand, thankfully. I've spent about £55 total for 3.
-
@Romanoat said:
Silly wingmen and sidekicks. How about a surge???I'll drill out the pivot holes on the Phillips and small flathead after I get some sleep. >:D
I like this one. I don't need pliers, but would very much like to have a folder with blade exchanger.
So here is my question:
Is there enough room to have the bit-holder with bit-extender in there? -
@Etherealicer said:
I like this one. I don't need pliers, but would very much like to have a folder with blade exchanger.So here is my question:
Is there enough room to have the bit-holder with bit-extender in there?The end of the bit extender is too wide.
-
I like this one. I don't need pliers, but would very much like to have a folder with blade exchanger.
So here is my question:
Is there enough room to have the bit-holder with bit-extender in there?The end of the bit extender is too wide.
Thats what I thought after looking at images again and realizing that its probably not wider than a Wave. Thanks for the info though.
I think I will have to slaughter my unloved Wave for some experimenting... >:D
-
Going of this picture by Kampfer it looks like the Sidekick tang for the outside tool is pretty similar to the one from the Wave.
Can someone tell me if they are the same size? Outside diameter like in the image below.

-
@Etherealicer said:
Going of this picture by Kampfer it looks like the Sidekick tang for the outside tool is pretty similar to the one from the Wave.
Can someone tell me if they are the same size? Outside diameter like in the image below.
They are pretty much identical width. However, the tool 'stop' cutout at the top is deeper on Wave/Charge blades. This means that when you open the blade/tool completely, it will extend past the straight line and will point a little upwards. I tested this on my S-Wingman with the spare Wave PE blade and while it fitted width and thickness wise, it didn't work for me as my OCD prevented me from having blade opened in upward facing direction, rather than straight line. Oh and there's the issue with the shim/spacer as the Wave/Charge blades come with 7/32" (5.5mm) hole and the Wingman pivots are all 3/16" (4.75mm).
OCD is a bitch...Wave blade mod will work for some but for us affected with the disorder, it wont :(
-
Going of this picture by Kampfer it looks like the Sidekick tang for the outside tool is pretty similar to the one from the Wave.
Can someone tell me if they are the same size? Outside diameter like in the image below.
They are pretty much identical width. However, the tool 'stop' cutout at the top is deeper on Wave/Charge blades. This means that when you open the blade/tool completely, it will extend past the straight line and will point a little upwards. I tested this on my S-Wingman with the spare Wave PE blade and while it fitted width and thickness wise, it didn't work for me as my OCD prevented me from having blade opened in upward facing direction, rather than straight line. Oh and there's the issue with the shim/spacer as the Wave/Charge blades come with 7/32" (5.5mm) hole and the Wingman pivots are all 3/16" (4.75mm).
OCD is a bitch...Wave blade mod will work for some but for us affected with the disorder, it wont :(
Thanks, I also noticed that the flat at the back is slightly at an angle with the Wingman...
Anyways, I intended to add a unrelated tool (scalpel), but it doesn't have enough metal, so I was hoping that the Wingman/Sidekick would be smaller and it would therefore be a better fit...
-
It looks so nicer than the regular Wingman! Unbelievable.
-
@kkokkolis said:
It looks so nicer than the regular Wingman! Unbelievable.I must confess, that yes, it does. It doesn't give me what I'd want from a tool (the wrong things lock), but seeing as I bought a Wingman ages ago just for the scissors, I suppose it gives me a project to build and trade away to get some value back rather than just chucking it in a drawer
-
SO need a $18 Sidekick so I can make one of these when I get home. Or make Kampfer do it.
Could not wait till the end of the thread to reply so there will be more to add I bet.
Well done everyone.
Edit: Good news I got through the thread.
Bad news is they are still on sale at Home Depot.

-
I bought another wingman just for this, one question, will the wingman scissors work with this mod or does it have to be the sidekick scissors.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:D
No tools inside, everything is gutted out. That is why I said it is a set of folding pliers.
