And so it begins.... (My adventures into Alox!)
-
@HarleyXJGuy said:
Ok last question. I know when you are answering my noob questions you are not building sweet Alox SAKs.So the bottle opener on the above SAK could be replaced with a combo tool?
Combo tool / phillips on one layer could work. The combo tool is VERY thin though and not a good replacement for the normal openers. It bends very easy so I would only recommend that IF you only want to use it for can and bottle opener, and not a screwdriver/pry tool. That is why the phillips and dual opener mod is so popular.
-
Will your 91 ti scales be milled for the toothpick and tweezer?
-
@glorn said:
Will your 91 ti scales be milled for the toothpick and tweezer?I'll for sure try a set to see how it goes. It'll be a manual operation so I'll have to make a jig to make it repeatable. Tweezers are easy as the slot is actually pretty thin, and since tweezers want to spring open, then hold themselves in well. The toothpick is more annoying as the slot is much deeper and retention relies more on friction and if it was up to me I think I'd skip it for those reasons.
-
I got a nice surprise today in the mail. My prototype 91mm alox showed up today. I had a shop make me up 10 sets as a test. Wide alox pattern to ruduce the machining cost a bit. They need some hand finish work before I send off for hard anodize, but they should be interesting at least. :D


-
Dibs fools!
Oh and is it just me or is it like a mini Christmas feeling everytime I see a reply to this thread?
Forgot to ask what color you gonna ano these Robert?
-
@Syph007 said:
I got a nice surprise today in the mail. My prototype 91mm alox showed up today. I had a shop make me up 10 sets as a test. Wide alox pattern to ruduce the machining cost a bit. They need some hand finish work before I send off for hard anodize, but they should be interesting at least. :D

Ahh first ti and now these. Ugh you making it hard on me lol
-
Not hard on you Steve cause as you see I called dibs.

-
@tattoosteve99 said:
Ahh first ti and now these. Ugh you making it hard on me lol:D
Ive got 2 more secret batches of parts being made still too... wont be ready until january though. The waterjet guy has the nerve to shut down for 2 weeks! :D
-
Looking good Syph...cannot wait to see the other two batches.
-
Please keep it coming. :)
-
@HarleyXJGuy said:
Not hard on you Steve cause as you see I called dibs.
Not a chance. You need to read way down in the mod squad. There's a few of mine about this very thing. So I've got a least a year dibs on you :P
-
Not hard on you Steve cause as you see I called dibs.

Not a chance. You need to read way down in the mod squad. There's a few of mine about this very thing. So I've got a least a year dibs on you :P
Except I am almost a day ahead of you here onthis side of the world.
So still DIBS!
-
Not hard on you Steve cause as you see I called dibs.

Not a chance. You need to read way down in the mod squad. There's a few of mine about this very thing. So I've got a least a year dibs on you :P
Except I am almost a day ahead of you here onthis side of the world.
So still DIBS!
Haha your still a NOOB. But I can share :)
-
Finally a Ti 91mm is born!!! Super tinker with black alox liners. :D
The countersink on the screws I do with my mill so they are precise. Its a critical step to making a high end fit and finish to make sure each screw looks the same. They are all perfectly flush with the scale. Also with all Ti mods I do the inside wear points are carbidized.
It was starting to snow when I was taking pics, so these are the best I have for now.




-
That is stunning work A+, as always

-
Beautiful!
-
I like it!
I´d take one like this without the hook and the cross cutout, if I was to decide. -
Very nice!!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
