Any love for Wenger?
-
Lot of references, but finaly only 2 knives : 1 with Corkscrew and 1 with Phillips
And I'm not sure that 1 76 51 02 is the good reference
**********
1 76 51 02 is the Wenger number printed on the box that came w/the SwissGrip. -
I will have a look tomorrow in my catalogs for the correct catalog numbers
-
I had a quick look at the catalogs available, and I think I now understand what happened here.
The names Wengergrip 51 and Wengergrip 76 were first used on this discussion probably because they were found on this website (it is the the well known us branch of the danish suppliers of the colored Victorinox cadets)
http://thegoodstuffshop.com/swissarmyknives.aspxThe 2005 and 2006 european catalogs do use the same names

But, as you can see, there is no visual confirmation if the model "51" had corkscrew or phillips driver.
I believe, based on some web research, that the model 51 was just the same as model 76 (so with corkscrew). The only difference is that it was offered with the plastic box and kit.The more clear image comes from the european 2007 catalog

which uses the same names as referred by Jean Claude.
Model 76 with corkscrew and model 76.02 with phillips.The 2008 catalog only shows model 76.02 (with phillips)

So the bottom line is: the wiki is probably confusing, and, in my opinion, these should be the identifiers to show:
**1.76.01.02 Wengergrip 76 (corkscrew)
1.76.02.02 Wewngergrip 76.02 (phillips)
**
and then mentioning this, but only as a subvariant of model 76
1.76.51.02 Wengergrip 51 (same as Wengergrip 76, only changing the packaging).
What do you think? -
I believe your explanation is right on the money.
Those photos I received in my email look identical.
**Wengergrip 51 Multitool
**
Super heavy tool with 12 functions
In hard gift box
Contains:
Flat-nose plier
Locking blade
Bottleopener
Can Opener
Screwdriver with safety lock
Wire bender
Saw for wood
Small screwdriver
Toolholder
Corkscrew
Metal file
Hacksaw blade**Wengergrip 76
**
measure: 6,1 x 1,7 x 1 inches - 155 x 42 x 23 mm
knife blade: 3,8 x 0,7 x 0,1 inches - 96 x 17 x 2 mm
weight: 10,8 oz - 305 gramSuper heavy tool with 12 functions
Contains:
Flat-nose plier
Locking blade
Bottleopener
Can Opener
Screwdriver with safety lock
Wire bender
Saw for wood
Small screwdriver
Toolholder
Screwdriver [I'm assuming this is the phillips driver]
Metal file
Hacksaw blade -
@basilio said:
I had a quick look at the catalogs available, and I think I now understand what happened here.
The names Wengergrip 51 and Wengergrip 76 were first used on this discussion probably because they were found on this website (it is the the well known us branch of the danish suppliers of the colored Victorinox cadets)
http://thegoodstuffshop.com/swissarmyknives.aspxThe 2005 and 2006 european catalogs do use the same names

But, as you can see, there is no visual confirmation if the model "51" had corkscrew or phillips driver.
I believe, based on some web research, that the model 51 was just the same as model 76 (so with corkscrew). The only difference is that it was offered with the plastic box and kit.The more clear image comes from the european 2007 catalog

which uses the same names as referred by Jean Claude.
Model 76 with corkscrew and model 76.02 with phillips.The 2008 catalog only shows model 76.02 (with phillips)

So the bottom line is: the wiki is probably confusing, and, in my opinion, these should be the identifiers to show:
**1.76.01.02 Wengergrip 76 (corkscrew)
1.76.02.02 Wewngergrip 76.02 (phillips)
**
and then mentioning this, but only as a subvariant of model 76
1.76.51.02 Wengergrip 51 (same as Wengergrip 76, only changing the packaging).
What do you think?Thanks Basilio !
It's difficult to know exactly what reference for what Wenger Grip ! And I think lot of references are like "knife with pouch" or "with case" or "with pouch and with case", speclial series like the Multitool one, etc...
Merry Christmas to all !
-
Some new Wengers!!!
1940 Wenger




I wish they made these today, I would definitely use one! I love the clip point blade and how thick it is. The weight and heft behind this knife is great! I even used the old can opener. Once it got started it actually worked great! It did leave a dangerous jagged metal edge though.Two phillips? Wenger you sillies!!!!! :D

I love the Matterhorn. It's going to be a great hiking knife. With a perfect width, no keyring, classic scales, no blade lock tab sticking out, and flush backsprings (catch on victorinox!) this is the most comfortable sak to use ever!
2D Phillips!


I love this knife. It's going to be used on many fishing trips. Look at the last picture closely though. I wonder if anything might be missing? Perhaps a way to dislodge debris from teeth, or tweeze? Nah that can't be it. :D -
@Nhoj said:
Some new Wengers!!!1940 Wenger
...I wish they made these today, I would definitely use one! I love the clip point blade and how thick it is. The weight and heft behind this knife is great! I even used the old can opener. Once it got started it actually worked great! It did leave a dangerous jagged metal edge though.
...
Your 1940 Wenger has carbon steel blades or stainless steel blades ?
-
Some new Wengers!!!
1940 Wenger
...I wish they made these today, I would definitely use one! I love the clip point blade and how thick it is. The weight and heft behind this knife is great! I even used the old can opener. Once it got started it actually worked great! It did leave a dangerous jagged metal edge though.
...
Your 1940 Wenger has carbon steel blades or stainless steel blades ?
They look like stainless but I'm not entirely sure.
-
Some new Wengers!!!
1940 Wenger
...I wish they made these today, I would definitely use one! I love the clip point blade and how thick it is. The weight and heft behind this knife is great! I even used the old can opener. Once it got started it actually worked great! It did leave a dangerous jagged metal edge though.
...
Your 1940 Wenger has carbon steel blades or stainless steel blades ?
They look like stainless but I'm not entirely sure.
You must know some thing :
Soldiers knives betteen 1908 and 1950 are allways carbon steel blades and you must find a "waffen kontrole" stamp on the scale side of the can opener.
If no "waffen kontrole" stamp or no year stamp on the blade or the blade is stainless steel, it's a civilian version of soldier knife.
You have more informations here : http://www.couteaux-du-soldat-suisse.ch/J01/index.php/en/autres-couteaux/couteaux-civils at the end of the page. -
Some new Wengers!!!
1940 Wenger
...I wish they made these today, I would definitely use one! I love the clip point blade and how thick it is. The weight and heft behind this knife is great! I even used the old can opener. Once it got started it actually worked great! It did leave a dangerous jagged metal edge though.
...
Your 1940 Wenger has carbon steel blades or stainless steel blades ?
They look like stainless but I'm not entirely sure.
You must know some thing :
Soldiers knives betteen 1908 and 1950 are allways carbon steel blades and you must find a "waffen kontrole" stamp on the scale side of the can opener.
If no "waffen kontrole" stamp or no year stamp on the blade or the blade is stainless steel, it's a civilian version of soldier knife.
You have more informations here : http://www.couteaux-du-soldat-suisse.ch/J01/index.php/en/autres-couteaux/couteaux-civils at the end of the page.Yes mine is a civilian one. It has no stamp on the scale. Now I know it's stainless. Merci
-
@Nhoj said:
Some new Wengers!!!1940 Wenger




I wish they made these today, I would definitely use one! I love the clip point blade and how thick it is. The weight and heft behind this knife is great! I even used the old can opener. Once it got started it actually worked great! It did leave a dangerous jagged metal edge though.Two phillips? Wenger you sillies!!!!! :D

I love the Matterhorn. It's going to be a great hiking knife. With a perfect width, no keyring, classic scales, no blade lock tab sticking out, and flush backsprings (catch on victorinox!) this is the most comfortable sak to use ever!
2D Phillips!


I love this knife. It's going to be used on many fishing trips. Look at the last picture closely though. I wonder if anything might be missing? Perhaps a way to dislodge debris from teeth, or tweeze? Nah that can't be it. :D

-
In case anyone is after one of these.
-
Ho no ! Too big for me !!!
:D -
My new Camo Wenger Ranger 05.


-
A neat looking display piece, but apparently originally for Wenger watches. Holders for the watches fit into the holes in the top of the display.
-
My Standard Issue.

It needs a tiny fedora and bullwhip.I've been carrying it for a year. In case anyone's keeping score, it has passed the Hammered Like a Chisel test.
-
Couple of Wengers in the mail today! :D
Tradesman & another Journeyman

-
Wenger Grip 74.822




-
@victor7000 said:
Wenger Grip 74.822Nice.
Did you order from Eastern Europe, or was it available locally?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



