Restoration Projects
-
@Saluki said:
I thought it would be interesting to see some pics and stories of SAKs that you found in rough shape and that needed a little TLC to get them back to usable shape.I purchased this old cross Pioneer from an auction site. The lady who was selling it had it labeled as a "Swiss Army Huntsman Knife". From her other items for sale it appeared she was having an online garage sale and knew nothing about knives. She did divulge that it had a name engraved on the blade, but from the pictures, it appeared very faint. I figured that I could polish it out. In the pictures, it appeared to have really good color, so I took a gamble hoping to add an old cross Pioneer to my collection at a reasonable price.
The knife was in much rougher shape than I had hoped when it arrived. The blade tip was bent. In addition to the engraving on the blade, it also had someone's initials on the cap lifter. The brass liners had green oxidation in places, and the knife was very dirty. There was very little snap on the blades or tools. The awl had some light surface rust, and many of the tools had some slight nicks and burrs from use. It didn't appear that the knife had been sharpened much, however the edge had been pretty much worn off. The knife was basically a butter knife. The blade was also scratched up pretty good.
I tried to straighten the tip, but broke about 2mm of it off in the process. Not a big deal, as it probably needed to be amputated anyway. I used a file to reshape the blade and form a new tip.
I used sandpaper to sand out out the engravings and scratches, and then repolished the blade using increasingly finer grits of automotive sandpaper followed by polishing compound. I filed off some of the burrs and rough spots on the tools. I also polished the awl to remove the surface rust.
I soaked the knife in WD40 for a couple of days, followed by a week long soak in mineral oil to remove the corrosion. The snap returned nicely after that. I then resharpened the blade, which was harder than I anticipated, since all semblance of an edge was missing. I started using my Sharpmaker with medium grit rods, but had to invest in some diamond rods when I realized that I wasn't making much headway.
After several hours of TLC, the knife is now in good functional shape, and looks pretty good too. It will never have serious collectable value due to the slightly shorter and reshaped blade and some of the small nicks and dings. For that reason, I have added it to my EDC rotation. I enjoy carrying knives that are a little out of the ordinary, so a vintage Pioneer with brass liners makes a fun carry knife.
Would love to see some other pics of refurbished SAKs.
Sent from my iPad using Tapatalk
Can you share more on the process to reshape the blade? Thanks
-
I just used an ordinary hand file to reshape the blade and fix the tip. I traced an outline of a good SAK blade onto a piece of paper to make myself a template in order to get the angle as close to original as possible. I cut out the template, and laid it up against my knife blade. I then used a Sharpie marker to color on the knife blade where I needed to remove metal to return to the original blade shape.
I then put the blade in a vise. I used some rubber strips to prevent the vise from marring the blade. I then began filing away with a hand file until all of the area marked with the Sharpie was gone and I had a sharp tip again.
This process left the spine rough, so then I used some fine grit automotive sandpaper to smooth out where I had filed on the spine. I think I started with 500 grit sandpaper and went up to 2500 grit or so as I progressed. I then used some polishing compound to complete the repolish of the spine.
After resharpening the blade on my Sharpmaker, the job to fix the tip was complete.
Sent from my iPad using Tapatalk
-
So what's the best method for blades that are very stuck... extremely hard to open? I've done the warm soapy water to clean out some of the gunk and that helped, but not enough. I've flossed out the pliers and that works a lot better, but the other blades... especially the screwdriver, on this knife are really, really hard to open.
-
@Saluki said:
I just used an ordinary hand file to reshape the blade and fix the tip. I traced an outline of a good SAK blade onto a piece of paper to make myself a template in order to get the angle as close to original as possible. I cut out the template, and laid it up against my knife blade. I then used a Sharpie marker to color on the knife blade where I needed to remove metal to return to the original blade shape.I then put the blade in a vise. I used some rubber strips to prevent the vise from marring the blade. I then began filing away with a hand file until all of the area marked with the Sharpie was gone and I had a sharp tip again.
This process left the spine rough, so then I used some fine grit automotive sandpaper to smooth out where I had filed on the spine. I think I started with 500 grit sandpaper and went up to 2500 grit or so as I progressed. I then used some polishing compound to complete the repolish of the spine.
After resharpening the blade on my Sharpmaker, the job to fix the tip was complete.
Sent from my iPad using Tapatalk
I've reprofiled several blades on SAK's. Usually it has been necessary after failed attempts to straighten the tip, and the blade snapped (I get almost all my SAK's from the TSA-confiscation-and-resale-bins). In my case I simply grind a new tip to the blade using a Dremel and a reinforced Parting-Off Disc. I do mine freehand, without even a template to guide me. I go slow, and quench any heat buildup frequently so the temper of the steel stays unaffected.
After that, it's a simple, but painstaking finishing using various grades of wet-and-dry paper. I go up to 1500 grit, then sharpening on a Lansky, then a final Simichrome buffing.
Here's an example of a "saved" main blade. In this case the blade is from the early 1950's, difficult to even find a replacement now.
Here's the before:
http://blogericious.blogspot.com/2014/01/beat-up-40s-victorinox.htmlAnd here's the after: (unfortunately no pic of the reprofiled blade) http://blogericious.blogspot.com/2014/01/old-40s-vicnow.html
-
@RedRamage said:
So what's the best method for blades that are very stuck... extremely hard to open? I've done the warm soapy water to clean out some of the gunk and that helped, but not enough. I've flossed out the pliers and that works a lot better, but the other blades... especially the screwdriver, on this knife are really, really hard to open.I use PB Blaster, and let it soak in for a while. Then keep working the stuck blade(s) back and forth. Even really stuck blades respond this way. Afterwards a soapy bath, then lube with a decent oil.
Oh, and I try not to break my Thumbnails on the blade, I use another knife, maybe the broad screwdriver tip, to start moving the stuck blade. -
Great thread sir!! It is amazing what a bit of scrubbing and an oily rag can do.
-
Great work on these restorations.
-
@RedRamage said:
So what's the best method for blades that are very stuck... extremely hard to open? I've done the warm soapy water to clean out some of the gunk and that helped, but not enough. I've flossed out the pliers and that works a lot better, but the other blades... especially the screwdriver, on this knife are really, really hard to open.Iv'e had good results with taking off the scales and soaking it in WD-40 for 48 hours. Should do the trick.
-

thread necro, just because
before

after

-

Good Bump
Great work Peter

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login