Hello!... and help, please...
-
BTW, I see you're looking to buy a Charge in the For Sale forum.
It's worth noting that the Charge is thicker, and the pocketclip won't ride as low as on the way due to the thickness of the scales.
Pictue borrowed from Zoidbergs thread:

-

When you think you have it all sorted out, comes another comment and makes a mess...
Now the question was wave vs charge... Used charge, new wave, same price...
I was into the charge because of the S30V, as I intend to use it as my main blade, and don´t carry 2 tools. Maybe the 420HC is too soft for everyday use...
Now you come and say it´s bulkier and not low ride??
If it wasn´t for the postage I´d get an S30V blade and swap for the original on the wave, but in Portugal is impossible to find, in Europe is rare, and from the US is expensive...
Need help, again... -
@enki_ck said:
It's worth noting that the Charge is thicker, and the pocketclip won't ride as low as on the way due to the thickness of the scales.So how much thinner is the Wave?
In JBW1's pic above it seems to have the same problem as a Charge.
Can anyone get a pic of them side by side with pocket clips? -
It's worth noting that the Charge is thicker, and the pocketclip won't ride as low as on the way due to the thickness of the scales.
So how much thinner is the Wave?
In JBW1's pic above it seems to have the same problem as a Charge.
Can anyone get a pic of them side by side with pocket clips?Not very, I think it's just a millimeter or two. But the screws add to it too. I never had a problem with the pocketclip on the Wave, always enough room for it to ride low. Charge on the other hand, not so much. I don't have the Wave anymore so can't take pics. :-\
Here's a comparison between the Charge ALX and Wave that might help.
</topic/29135
If your main reason for getting the Charge is the S30V blade, you can get one here on the forum. Got one just recently for $15 shipped.
</post/1000339>
-
@VAXCO said:

When you think you have it all sorted out, comes another comment and makes a mess...
Now the question was wave vs charge... Used charge, new wave, same price...
I was into the charge because of the S30V, as I intend to use it as my main blade, and don´t carry 2 tools. Maybe the 420HC is too soft for everyday use...
Now you come and say it´s bulkier and not low ride??
If it wasn´t for the postage I´d get an S30V blade and swap for the original on the wave, but in Portugal is impossible to find, in Europe is rare, and from the US is expensive...
Need help, again...The Charge has a cutting hook and pliers crimper if that helps you decide.
-
@zoidberg said:
The Charge has a cutting hook and pliers crimper if that helps you decide.I know, thank´s, but that´s not a deal maker or breaker to me. What made me push in the charge was the blade and the supposed "more comfortable" handles.
In all the rest, I thought it was just a wave!By the way, enki_ck, why are the screws of the pic you posted different from the ones on the comparison listed below?
edit:
(the picture is from a charge, right?) -
Different model Charge. The screws in the picture with the pocketclip are from a TTi. The comparison is ALX
Charge models: AL - TTi - ALX

They all add scale slabs to the frame that add extra thickness to the tool.
-
Major Spyderco loving steel snob here.
That said there was a time not to long ago when 420HC was the greatest thing since sliced bread and beer.
I suggest you grab the Wave and down the road if you feel the need to upgrade the blade just keep your eyes open for one on the forums. Willing to bet other then coolness factor it will not be needed.
-
I want to chime in on the Tool logic MT you are thinking about.
I had one and while the Idea was quite good, it is really lacking in fit and finish, compared to LM or Gerber.
The plier head is really small and the drivers are not nicely finished and rather small, too.
It is a knife with added functions, but I would guess the Pliers on a Victorinox 111 mm knife will be more rigid than those, while being even smaller.The Wave seems to fit your bill quite nicely. But I fear you will own a few more tools soon, anyways...
Welcome aboard!
-
No OHO - But if size and pocketability is a real concern - How about a nice little Juice S2? I just acquired one and it's a really nice package
-
Oh yeah I agree with what Thomas said.
Get them all.
-
You won't know what you want, need, or like till you try them all. That's my plan :D
-
Welcome!
You'll be amazed at the upgrade from gerber to Leatherman.
I have not find a single Gerber design is supior to leatherman counterpart.
Whaa? I'm trying to say that leatherman > Gerber in every way.
Welcome!
You'll be amazed at the upgrade from gerber to Leatherman.
I have not find a single Gerber design is supior to leatherman counterpart.
It's a good thing you don't use blunt nose pliers then eh. [emoji14]ok:
I totally disagree with this. Give me any variant of the Gerber MP600 over a Leatherman OHT any day. The OHT is overly bulky and awkward to find the right tool and which hand you need to open it with. Given that few people are truly ambidextrous, some tools are more likely to get worn out faster than others.
Def
-
So much agree with this.
One of the guys here has an OHT and it is miles behind the Gerber MP 600. Like if you were to compare Monrogue as the OHT and Harley as the much improved and more handsome Gerber MP 600.
-
I think the OHT looks better though.
So which one are you gonna be, the better-looking one or the better-performing one?
-
@HarleyXJGuy said:
So much agree with this.One of the guys here has an OHT and it is miles behind the Gerber MP 600. Like if you were to compare Monrogue as the OHT and Harley as the much improved and more handsome Gerber MP 600.
Such modesty
-
So much agree with this.
One of the guys here has an OHT and it is miles behind the Gerber MP 600. Like if you were to compare Monrogue as the OHT and Harley as the much improved and more handsome Gerber MP 600.
Such modesty
Not only that but I am brave, strong and quite the ladies man.
-
Is the guy that started this thread even reading this anymore? Hope they figured it out.... ;)
If nothing else, he learned Harley likens himself to the ugly sister of the MT world. Everyone has had it, really tried to love it, but..... moved on, but it still looks at you from the bottom of the pile, wondering why, why not the ugly sister?? At least she can cook, saves her money, is happy with just going to the dollar movie. You can even just bring your own can of coke to share and she's happy,..... wait what? -
Are we calling the OHT the ugly sister?
I think we have lost our way...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login