What Did You Use Your Multitool For Today?
-
What's up with the eloquent language today OG? Do you like the spirit more than the Wave?
-
@Monrogue said:
I also used the Spirit's scissors to cut up a depleted gift card. I'm not a huge fan of these scissors in comparison to the 91mm Vic scissors, but they are tougher, and cut that card up but good without any struggle
What in the world was Vic thinking with this?
You have what are arguably the best scissors in the MT world and decide to put out a pliers based MT with some scissors. Well I got prolly a million of the best ones around but instead of using them lets go through the hassle of making a new model and throw them in there?
-
@Higgins617 said:
What's up with the eloquent language today OG? Do you like the spirit more than the Wave?Lol, didn't know I was being all eloquent and such

I'm on the fence about the Spirit vs G1 Wave vs other MTs. I've found that I have been missing the Wave since I started with Spirit, but that could just be the fact I'd been carrying it the last couple weeks and became used to having the OHO blades. I do prefer the Wave's pliers though, as I like the more needlenosed shape. Both would be just fine for stand alone carry for me, but the Spirit has the advantage there due to all outside accessible tools. I would likely prefer the Wave's scissors, but the Spirit's scissors are better than I initially gave them credit for. They're just oddly shaped to me, but they're tough and work well.
Overall though, if OHO weren't a major factor for me (which it normally isn't) then I'd give the Spirit the edge due to its versatility.
-
What's up with the eloquent language today OG? Do you like the spirit more than the Wave?
Lol, didn't know I was being all eloquent and such

I'm on the fence about the Spirit vs G1 Wave vs other MTs. I've found that I have been missing the Wave since I started with Spirit, but that could just be the fact I'd been carrying it the last couple weeks and became used to having the OHO blades. I do prefer the Wave's pliers though, as I like the more needlenosed shape. Both would be just fine for stand alone carry for me, but the Spirit has the advantage there due to all outside accessible tools. I would likely prefer the Wave's scissors, but the Spirit's scissors are better than I initially gave them credit for. They're just oddly shaped to me, but they're tough and work well.
Overall though, if OHO weren't a major factor for me (which it normally isn't) then I'd give the Spirit the edge due to its versatility.
No pocket clip on the Spirit right?
-
I also used the Spirit's scissors to cut up a depleted gift card. I'm not a huge fan of these scissors in comparison to the 91mm Vic scissors, but they are tougher, and cut that card up but good without any struggle

What in the world was Vic thinking with this?
You have what are arguably the best scissors in the MT world and decide to put out a pliers based MT with some scissors. Well I got prolly a million of the best ones around but instead of using them lets go through the hassle of making a new model and throw them in there?
Yeah, I'm not sure what the thinking was there. Maybe a size/shape conflict for the design of the Spirit
Since the good Vic scissors are in one of the larger Swisstool models, I'm thinking they're too much for the smaller Spirit. Someone else may know better than I, but that's all I can come up with. -
What's up with the eloquent language today OG? Do you like the spirit more than the Wave?
Lol, didn't know I was being all eloquent and such

I'm on the fence about the Spirit vs G1 Wave vs other MTs. I've found that I have been missing the Wave since I started with Spirit, but that could just be the fact I'd been carrying it the last couple weeks and became used to having the OHO blades. I do prefer the Wave's pliers though, as I like the more needlenosed shape. Both would be just fine for stand alone carry for me, but the Spirit has the advantage there due to all outside accessible tools. I would likely prefer the Wave's scissors, but the Spirit's scissors are better than I initially gave them credit for. They're just oddly shaped to me, but they're tough and work well.
Overall though, if OHO weren't a major factor for me (which it normally isn't) then I'd give the Spirit the edge due to its versatility.
No pocket clip on the Spirit right?
That is correct. I should have mentioned that, as the G1 Wave doesn't either. I did put a Nite Ize clip on it though, which improves the likelihood of me carrying it. The Spirit will not be marred by a pocket clip. It's just too nice looking, and smooth, so it slides right down next to my wallet without any interference. Still, I prefer a pocket clip as it almost completely negates the weight.
-
Mini Bucktool 360 for removing tags from new clothes. Never really reckoned much to the scissors before, but they did a good job this evening. The fine pliers were also good for getting out the little nest of threads where the tags were sewn on
-
After the initial excitement had worn off from setting my leg on fire :ahhh :ahhh :ahhh, and ensuring that I wasn't going to blister, I cut my jeans down to make shorts with my DEsTroyer Mod.
Impressive shears those Paul Chen ones. They cut through both trouser legs (including the seams of the jeans) at the same time. I really am going to have to come up with some decent handle fillers after I rob this tool to build the Knifeless BO Diesel so I can keep it in circulation
-
I decided to permanently mount the LED lights on our family room tv, like I did with the tv/ monitor on my desk. I used my Pulse

-
@stealth007s said:
I decided to permanently mount the LED lights on our family room tv, like I did with the tv/ monitor on my desk. I used my Pulse
LED lights?
-
I decided to permanently mount the LED lights on our family room tv, like I did with the tv/ monitor on my desk. I used my Pulse

LED lights?
LED light strips from IKEA that I mounted behind the tv
-
Not a heavy duty task but I used the awl on my Surge to dig out the wick on a really big candle that got stuck in there.
-
Last night, I used my no-name MT to cut a bunch of tie-wire, then bent the bottle opener/large screwdriver doing some very light prying... D'oh. I guess it's time to step it up.
-
While shrink wrapping a boat after I repaired I used my CS4 to hold tension on a Truckers knot while I tied it. Shrink wrapping boats while cold is no fun !
-
HA HA , you're funny
Hopefully this weekend, I cant take it much longer -
Opened the mail.
Used my skeletool on a few brake line bleeders.
-
Cutting the christmas tree into bits so it'll fit in the compost bin. The wood was a bit wet and sappy and gummed the saw on my Spirit up, so I had to break out the big guns, my 11" Silky pruning saw. 8)
<a href="https://flic.kr/p/qt3Bs4" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7542/16058617299_1c5b206720_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="https://flic.kr/p/qt3Bei" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7505/16058616559_bb09acd1b4_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
I cut my tree with Swisschamp last week with same results. Tree glogged teeth of the saw..
Today i had to use my Spirit to get in my car trunk. God damn ice freezed my vagons trunk shut. Opened electrick lock, took good grip of the handle, and teared the handle off of that door. Smurfing winter. I had to cut two wires, pull three wires off with plier, and pry that door open with bottle opener/prytool.
-
Used my Style CS to cut multiple lures on multiple line types.
I've still never owned a pair of scissors that you didn't have to "squeeze" the blades together to cut fishing braid.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login