Leatherman PST chronology project
-
Is it the same small driver on the OG wave? I'll check latter.
-
This week I've had a (small) invasion by LM's "hollow men" (but I don't mind) :D
#701 USA PST v2 hollow knurled screws
#706 JPST v3 hollow rivets
#705 JPST v4 hollow rivets ( & "large" lanyard, 4238862, knife tang: "Japan, Leatherman" )
#697 JPST v5 hollow rivetsIt will be some time before I actually get to handle these, but I'm looking forward to the arrival down-under of the invasion force :)
-
PST date stamp 11/94 on one handle and 12/94 on the other. I've had this one since I bought it new in 1995.



PST date stamp 07/94 . I got this one recently from E-bay.



-
Nice PST Steve.
-
-
A couple of golden oldies

-
Cool PSTs Steve

Also, congrats to Greg for 2K posts

-
-
Thanks Guys :-[
While I'm here I might as well tell you about my latest odd-ball PST ( I do like the unusual ones :D )
This looks just like a regular v7 PST except for the pliers, which only have "Leatherman" on them (no "USA" like you'd expect).
They look like the standard rounded USA made pliers (ie not Japanese pliers), and the whole tool looks totally unused and unmarked, so I don't think it is a parts bin special or repair job. The casting for the word "Leatherman" is different (slightly smaller font) to that on my really early PSTs (the other USA PSTs that I have that don't have "USA" on the pliers), and they have been ground slightly rounder on the outside of the jaws.
All in all it is a bit of a puzzle to me. Anyone else have one or seen one like this ?
-
Posts 389, 405 and 465 of this thread.
-
Yes that looks like it (and I'm very impressed that you both knew of them AND exactly where to look
)Would you agree that the pliers are a bit different to the "Leatherman" only pliers on the really early PSTs ? I wonder why they later made (an obviously small number of) pliers without the "USA" on them.
It is almost like Leatherman were anticipating the kerfuffle they had years later about putting "USA" on pliers that weren't 100% made in the USA (when they had to grind out the "USA" on a whole lot of made but unsold MTs after they lost a court case).
-
I'll have to go dig mine out and look at it and compare it to some others. I always figured Leatherman was just using up old parts. :) Leatherman might have had different vendors supplying them and machines wear so there can be small differences very easily.
-
These four PSTs left to right:
1 blank handles except for US Pat #, no USA plier head, etched knife blade
2 POCKET SURVIVAL TOOL, no USA plier head, etched knife blade
3 late 80's PST, no USA plier head
4 POCKET SURVIVAL TOOL, US Pat #, USA plier headThe plier head stampings on 1 and 2 are different than 3 and 4. There was a change of tooling or vendors. It seems to me there was a transition from one to the other. Plier heads 1 and 2 are more blocky than the rounder 3 and 4. I'm still of the opinion that Leatherman was using up old plier heads on PST #3. There you have it. Let the discussion begin. :D
-
@David said:
These four PSTs left to right:1 blank handles except for US Pat #, no USA plier head, etched knife blade
2 POCKET SURVIVAL TOOL, no USA plier head, etched knife blade
3 late 80's PST, no USA plier head
4 POCKET SURVIVAL TOOL, US Pat #, USA plier headThe plier head stampings on 1 and 2 are different than 3 and 4. There was a change of tooling or vendors. It seems to me there was a transition from one to the other. Plier heads 1 and 2 are more blocky than the rounder 3 and 4. I'm still of the opinion that Leatherman was using up old plier heads on PST #3. There you have it. Let the discussion begin. :D
That's my guess as well. The different vendors (mentioned here... </topic/6065) would explain the slight differences in the font.
When they received a box of plier heads in, they probably just dumped them in a big bin and grabed the ones on top to assemble the tools. Maybe a few of the older plier heads remained in the bin when it was nearly empty and they dumped in a new batch to fill it up. A couple years later when they finally got to the bottom of the bin, there lies the old plier heads. Just a theory :D.
-
Has anyone ever seen a PST marked POCKET SURVIVAL TOOL with a lanyard ring?
How about black oxide... does anybody know when Leatherman started making BO PSTs?
Just curious

-
@bdAmmo said:
Has anyone ever seen a PST marked POCKET SURVIVAL TOOL with a lanyard ring?How about black oxide... does anybody know when Leatherman started making BO PSTs?
Just curious
In the late 80's from what I've seen. I have several no date BO PST's. Never seen or heard of one before then. While we are on the no date late 80's PST one way to date them a little is that the ones with the single cut file to the outside are older than the ones with the double cut to the outside.
-
@bdAmmo said:
Has anyone ever seen a PST marked POCKET SURVIVAL TOOL with a lanyard ring?Well I've got one, but I'm a bit suspicious of my particular PST (#644) because it has a saber-clip point blade which I understood weren't made until later.
The screws on the component end of the handles show definite signs of being opened using pliers or similar (the knurling is slightly "chewed").
However the screws on the plier & lanyard end show no signs of ever having been opened (but that doesn't mean they weren't).
This tool has "LEATHERMAN TOOL" with no (R) and also "US PAT 4138862" and "PORTLAND OR" stamped on the bottom handle.
@bdAmmo said:
How about black oxide... does anybody know when Leatherman started making BO PSTs?Just curious

Hmm, I'm guessing you are referring to that rarity you just won on the bay of fleas

Extra good find

I've never seen such an early PST with a BO finish. My guess it is either a prototype/pre-production tool made by Leatherman, or else it is an after-market BO treatment. It may be worth asking CJ Goodrich if he knows anything about it ?
-
Has anyone ever seen a PST marked POCKET SURVIVAL TOOL with a lanyard ring?
How about black oxide... does anybody know when Leatherman started making BO PSTs?
Just curious
In the late 80's from what I've seen. I have several no date BO PST's. Never seen or heard of one before then. While we are on the no date late 80's PST one way to date them a little is that the ones with the single cut file to the outside are older than the ones with the double cut to the outside.
Good to know, thanks David

-
Has anyone ever seen a PST marked POCKET SURVIVAL TOOL with a lanyard ring?
Well I've got one, but I'm a bit suspicious of my particular PST (#644) because it has a saber-clip point blade which I understood weren't made until later.
The screws on the component end of the handles show definite signs of being opened using pliers or similar (the knurling is slightly "chewed").
However the screws on the plier & lanyard end show no signs of ever having been opened (but that doesn't mean they weren't).
This tool has "LEATHERMAN TOOL" with no (R) and also "US PAT 4138862" and "PORTLAND OR" stamped on the bottom handle.
@bdAmmo said:
How about black oxide... does anybody know when Leatherman started making BO PSTs?Just curious

Hmm, I'm guessing you are referring to that rarity you just won on the bay of fleas

Extra good find

I've never seen such an early PST with a BO finish. My guess it is either a prototype/pre-production tool made by Leatherman, or else it is an after-market BO treatment. It may be worth asking CJ Goodrich if he knows anything about it ?
Thanks again Greg

The PST you mentioned does sound a bit pieced together unfortunately.
I'm hoping the one I have on the way doesn't give me the same impressions. It does have all the correct parts (blade, old style can opener, milled awl) but that lanyard ring has me suspicious.
-
The details on my latest:
Rivets or knurled screws? Thick knurled screws
• Lanyard attachment? Yes
• (Old) small diameter or (new) large diameter plier pivot? Small
• LEATHERMAN alone cast into plier pivot? Or with USA? Or TOOL? LEATHERMAN USA
• A hard wire cutter notch? No
• Handles stamped with what? "Upper" LEATHERMAN TOOL PORTLAND OR "Lower" POCKET SURVIVAL TOOL
• Inch ruler only, or inch/metric? Inch only
• Date codes? No
• Drop point knife blade or clip point? (saber?) Old drop point
• Knife blade tang stamped LEATHERMAN alone? Or with USA? Or JAPAN? LEATHERMAN USA
• Screwdrivers: pivot-in or pivot-out? Pivot inOh, I almost forgot to mention.... it's a black oxide PST :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login