kkokkolis' EDC & SDC
-
I just read from start to finish. You have mastered the transferring and carrying aspect of EDC. Even though it's always a work in progress. I really really like how your always on the hunt for additions and improvements! I'll be buying a few pencil grips now for my screwdrivers and extensions.
-
I enjoyed it a lot in the way. The secret to success is the bag in bag concept. I just move from bag to bag that open black bag in bag with some essentials and my Skinth with my tools (toys). Just two things to remember. Both items are recent, purchased during my MTO era.
I even have two bags in bag into my Skinth. One is a clear congress namecard holder with a first aid kit for cuts (bandaids, alcohol pads etc) and the second a but for all small items. The second is in its 4th generation already. After trying my army days sewing kit holder, a small leather change wallet and a small EU plastic holder I now use a see through dense white mesh wallet that is bigger, thinner and permits me to see the contents and therefore retrieve them easier. I'll post some pics soon. -
kkokkolis, I enjoyed reading your EDC thread. You are using the Skinth in a way that is different from the way most other people use their Skinths.
Good job!

-
(Bad) Pics.


-
Do things ever snag on eachother as you pull 1 item out?
-
No. Most items are in their respective pocket (of the Pentapocket system) and the material has memory, meaning that it adapts to its contents and stays that way until you put the tool back again.
The only tools that are side by side are the Crunch, BiC, XLT and Vic sharpener but they all have smooth sides/scales (I put the Crunch with the protruding pliers piece resting in a fold of the material). The only thing that happens is that when I remove the Crunch or XLT then the BiC or Vic might fell in the side at an angle and I have to put it in it's place, no big deal. -
After reaching top load with the Skinth CatchAll, I now consider a lighter EDC, built around a SAK and Multitool. I think that my new Alox SAK with scissors hiraethus made for me will pair perfectly my scissorless Spirit. Another option is the XLT with a Crunch or Skeletool and the Charge TTi with hobbit scissors can replace the Spirit.
I ordered a Skinth Shield 2XL (and a Toolet M7 by the way) for this setup but it occurred to me that the unsang Victorinox OD Nylon seath that I EDCed before the Skinth might be able to accommodate this setup.
Guess what? It does.
Here it is, loaded.

Look how smaller it is compared with the Skinth CatchAll and the Victorinox Swisstool Plus seath.

And here the full load.

Maybe I'll start using it, while I wait for the Shield. -
@kkokkolis said:
Watches? I always carry one and have just a few. I have an eye for two specific watches I might get someday. Just one of the two. My No 1 is Tissot T- Touch

And my No 2 is Suunto Core

Until then I EDC the last year a Sector that's very EDC friendly.

For outdoors (and right now) I use a Casio Protek

And I exchange them from time to time with my previous EDCs, an automatic mechanical watch called Follie Follie


A Swiss Military (very nice)

A watch my mother gave me

And a Reymond Weill, present of my wife 23 years ago

Rarely I carried this Soviet chain watch, mechanical and stainless steel with hunting engraving. Might EDC it when I grow older.

Ha, My watch collection is as bad as my knife collection also :D
-
Before my Skinth CatchAll, 10 months ago, I EDC'd both this OD seath with Spirit, ratchet, extender and 6mm bits AND a Victorinox SOS leather sheath with an XLT and stuff. So this is going to be my lightest EDC since I joined here and the first without some kind of Swisschamp in 27-28 years. Let's see if I'll survive this. I will feel some inconvenience, that's for sure.
Today I tried to finalize the setup (a temporary, pre Skinth 2XL setup) and the outcome is this.

You can see that I sewed a black ribbon on the left side (as seen) for a Minimag LED. The material wasn't very good, I might redo it with some elastic ribbon in the future, but it works.
I replaced the 6mm bit kit and philips adapter with a Leatherman bit kit. I choose all the metric Hex and Torx bits and a PZ3/0 bit. I don't know if I will prefer it over the hexagonal bits but it saves space. So the Pocketwrench II fits nicely with it.

You can see the full contents here. I have put in the Leatherman extender since I choose the flat bits. I also used the same black paracord with OD dots everywhere. I don't like much the three paracords, it is too much, so I might remove the one from the SAK since it is easy to retrieve it from the case without the lanyard. I'm still testing.
I like the option of a corkscrew and it is a holder for the mini driver I use all the time (I wear glasses).

The testing already started, so I used the Spirit to pass the needle through the many layers of nylon, the corkscrew to untie the paracord until I was content with the result, the SAK scissors to cut the paracord. But I had to use the BiC from my Skinth to burn the paracord edges.
If the spirit had the 91mm scissors and blade (doable if they don't mind the tools not following completely the curves of the handles, as Leatherman chooses to do, they might make the blades OHO this way) I wouldn't need the SAK at all. The Spirit has all the over a century field tested tools a man needs, even a hook, and they all lock! My keychain Minichamp completes the setup with the more delicate tools for personal care and opening of smaller screws, a pen and a choice of toothpick or tweezers.
So the blades now are just three, with the SAK's the best of the three.
I think it is going to be fine, as long as I pass the withdrawal stage unharmed. -
Awesome setup, and I'm very glad the Pioneer is getting used.

-
Thanks hiraethus. Yes, the Animus was going to be used, I changed setup to use it and it permitted me to change setup. It was used already since it replaced my Squirt as my general purpose scissors in home. I don't know if the Victorinox 91mm is the best pair of scissors but it is the one I prefer and I am considerably accustomed to their qualities. A lightweight frame makes their use easier. Since they were not included in their masterpiece, the Spirit, the rational thing to do was carry a lightweight SAK that sports them.
I was going to ask Syph007 to make me one sooner or later so your gift was spot on and valuable. These are the scales I prefer and the only change would be an awl or pruner blade in place of the combo tool. I love them both. Since the Spirit has an awl, the pruner would add one more special blade to the setup, mainly for box opening. The Cadet's file would be another option but I have it on the Minichamp. I'm just giving you ideas for future projects.
Stay assured that it is already loved and used. -
Now the whole setup fits in my bag in bag, so I win in weight, space and manoevrability, just one thing to move from bag to bag, apart from my Pentax binoculars.
I will be taking the CatchAll with me though when I'm goimg to our summerhouse or to my daughter's house, since there's a lot of tinkering there all the time. And when stargazing, telescopes and mounts have all the extremes of different screwheads.

-
I emptied my Victorinox Trevi and my wife put it in the laundry a couple of days ago. When I refilled it there were many items I could throw away (documents, pieces of paper with notes, expired stuff, paperclips, bookmarks, a forgotten book etc). Now it is about 2-3 kgr lighter and it shows on my shoulder. But I still have the withdrawals. Today my hand searched subconsciously for my Charge, for the only tool I really used, the serrated blade's strap cutter. I realized it wasn't there and I used my Opinel instead, no big deal.
The CatchAll permitted me to test side by side various pieces for almost a year. What I really used?
Spirit 90% - Charge 10% (almost everyday)
Vic Ratchet 70% - Other drivers 30% (2-3 times a week)
Hex bits 90% - LM bits 10% (but LMs save space)
Spyderco Endura 90% - Opinel 10% but Endura frightened people and the last month I left the Spyderco home and used Opinel 100% (it does the same with a less fancy way)
Sewing materials, twice in 10 months (I keep a kit in my bag elsewhere)
Bandaids, three times in 10 months (I keep a couple and some alcohol pads inside my wallet)
Compass, pens, pencils and stuff almost never
Minimaglite almost never (I use my iPhone or the LED on my keychain instead)
Pocketwrench II or Crunch or adjustabe wrench several times, but PWII is the lightest/smallest
Need of two pliers simultaneously 3-4 times, so I might try to fit the Crunch in my new Skinth for those times
Swisschamp XLT* every other day, but I used the scissors 80% so I would be good
Sharpeners 5-6 times (half of them I sharpened other people's knives) so I might try to fit just one bit (instead of ceramic & diamond & stone I had in the CatchAll)
Lighter once a week or more but I keep a small BiC in my bag anyway
Blue Tak 3-4 times but I keep some in my work bag elsewhere*What I will miss from the XLT: I used some tools like the fish dischorger (for poking without harming things), the hook (the hook on the spirit has the awl closeby and is more dangerous) and the coke spoon (for my tea, but a knife can do the same), the needle (I can fit a needle somewhere though), the cubertool (but I have the LM bits instead). I also used the small blade or the runing blade for some jobs (like removing safety caps, but a larger blade can do that also). I won't miss all the similar tools the Spirit Plus and the alox have, corkscrew and minidriveer included. And the Minichamp will keep my hands tidy as I like them.
So I would say that with this lighter setup I have 85-90% of the functionality at a fraction of the weight. Still, playing doesn't follow logic, it is an animal instict and it has its own rules. I miss my toys but I expect things to go better with time.
-
@kkokkolis said:
....
The CatchAll permitted me to test side by side various pieces for almost a year. What I really used?
Spirit 90% - Charge 10% (almost everyday) ...Your quantified analysis is impressive.
-
Victorinox tools are more familiar to me. I got my first Victorinox in 1986 and my first Leatherman in 2012. That might br the main reason for this phenomenon.
-
New additions. A Skinth Shield 2XL and a Toolet P7

I'm going to EDC the Shield as I said, and I'm going to see what I'll do with the toolet (because most tools that fit to it are going in the Shieldl.
-
I tried some EDC combinations and this is my choice at the moment.
Front (it closes easily)

Back (he he he he he [emoji4] )

In (bad focus)

Out

-
Just moments after this picture I added the Victorinox Compass/Thermometer (I have a soft spot for that in my heart, don't blame me) a couple of big needles, a bit of cable wire and some blue tak (always useful). I guess it is almost full, just a pack of hotel matches to add the fire element (or some magnesium).
I can fit the Swisschamp XLT or the regular inside but then the multitool becomes problematic. A Spirit and a Crunch fit side by side but then I loose the SAK. The problem is the plierhead bit that protrudes and the big lock at a lesser extent. A Mountaineer fits instead of an Alox but it closes marginally. Two bit kits or a Hex bit kit fit but you need force to close it. You can fit many small items but the main one is just one and I couldn't choose any other than the Spirit.
Oh, I forgot to add a Vic pair of tweezers! -
This is your "Light carry"?

-
No, I added some items, look the last posts.
Oh, don't make me make an ultralight carry too.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login