The Knifeless Charge.
-
Did you break the scissors? I thought you had just broken the drill bit.
No, the tang broke, cobalt drill 1, Wingman scissors tang 0.
Should have opened up the hole more first, always necessary with a thicker tool but didn't bother with the thin tool
. Lesson learned.That's not good. Will you get another Wingman? How about 91mm SAK scissors?
-
Did you break the scissors? I thought you had just broken the drill bit.
No, the tang broke, cobalt drill 1, Wingman scissors tang 0.
Should have opened up the hole more first, always necessary with a thicker tool but didn't bother with the thin tool
. Lesson learned.That's not good. Will you get another Wingman? How about 91mm SAK scissors?
Maybe, because I will not be defeated. I put 91mm SAK scissors in my Rebar once but didn't like the self-deployment caused by the spring. Not so much Mr Pinchy as Mr Jabby :ahhh . Not seen the scissors for a while.
Anyway I'm so pleased with my Knifeless Fuse I might cut my losses on Wave. Just ordered a BN MP600 so that's funds for a while and another knifeless mod first on, bum, a scissorless MT.
-
Very nice. Prefer the looks of the Charge (esp. the Ti) over the Wave, and the skinny knifeless variant would be good for the UK.
-
That's a great mod!
-
I had a feeling you were working on something like this when I saw the pic of you grinding down the titanium scales. ;) I really like the way this one turned out... looks nice and streamlined, but still sturdy.

@zoidberg said:
No, I only took the raised washer parts off the scales.I did flatten out the fasteners though making the skinny total approx 16mm.
A regular Charge TTi is approx 19mm across the scales and 21mm across the fasteners.
did you check the weight difference at all? my Skinny ReCharge weighs in at 207g without the clip, and 211 with the clip (which is how I carry it). I don't have a stock Charge AL or ALX to compare, but they are both listed at 235g on Leatherman's website, so it's a savings of 28g, which is a full ounce for us Americans.

-
In the last couple weeks my minions and I hacked up a sweet Knifeless Charge.
Fixed.
I actually call my boys "minions" on a daily basis. ever since I took them to see the first Despicable Me movie, the best way for me to get their attention is to call out, "ASSEMBLE THE MINIONS!!" and they come running. :D
-
In the last couple weeks my minions and I hacked up a sweet Knifeless Charge.
Fixed.
I actually call my boys "minions" on a daily basis. ever since I took them to see the first Despicable Me movie, the best way for me to get their attention is to call out, "ASSEMBLE THE MINIONS!!" and they come running. :D

So Lobster Boy what did you do with the blade that came on your Charge?
-
@hiraethus said:
Very nice. Prefer the looks of the Charge (esp. the Ti) over the Wave, and the skinny knifeless variant would be good for the UK.Thanks.
I did make it with you guys in mind. ;) -
@Breezy12 said:
I had a feeling you were working on something like this when I saw the pic of you grinding down the titanium scales. ;) I really like the way this one turned out... looks nice and streamlined, but still sturdy.
No, I only took the raised washer parts off the scales.
I did flatten out the fasteners though making the skinny total approx 16mm.
A regular Charge TTi is approx 19mm across the scales and 21mm across the fasteners.
did you check the weight difference at all? my Skinny ReCharge weighs in at 207g without the clip, and 211 with the clip (which is how I carry it). I don't have a stock Charge AL or ALX to compare, but they are both listed at 235g on Leatherman's website, so it's a savings of 28g, which is a full ounce for us Americans.

Thanks.

Non digital 5kg scales puts it just over 200g and my larger hacked Charge with clip just over 240g.
I'll try to remember to weigh them properly next time I go past the post office.
-
In the last couple weeks my minions and I hacked up a sweet Knifeless Charge.
Fixed.
I actually call my boys "minions" on a daily basis. ever since I took them to see the first Despicable Me movie, the best way for me to get their attention is to call out, "ASSEMBLE THE MINIONS!!" and they come running. :D

So Lobster Boy what did you do with the blade that came on your Charge?
It is sitting here doing nothing atm.
-
Nice work Zman

-
-
Thanks.
I did make it with you guys in mind. ;)
send it to me for testing.You will have to win it first.

-
I had a feeling you were working on something like this when I saw the pic of you grinding down the titanium scales. ;) I really like the way this one turned out... looks nice and streamlined, but still sturdy.

No, I only took the raised washer parts off the scales.
I did flatten out the fasteners though making the skinny total approx 16mm.
A regular Charge TTi is approx 19mm across the scales and 21mm across the fasteners.
did you check the weight difference at all? my Skinny ReCharge weighs in at 207g without the clip, and 211 with the clip (which is how I carry it). I don't have a stock Charge AL or ALX to compare, but they are both listed at 235g on Leatherman's website, so it's a savings of 28g, which is a full ounce for us Americans.

Thanks.

Non digital 5kg scales puts it just over 200g and my larger hacked Charge with clip just over 240g.
I'll try to remember to weigh them properly next time I go past the post office.
nice!

I used an ALX when I made mine because I was too chicken to try grinding down the titanium scales with a Dremel, but now you have me reconsidering.

-
Thanks for the idea of having file and saw side by side
. Has helped me get my head round the Wingman scissors into Wave mod. Abandoning that and now going for the much more useful large driver and opener side by side on the other side. Feels right. Some work to do on the large tool deployment and small tool locking
before pics. -
Thanks for the idea of having file and saw side by side
. Has helped me get my head round the Wingman scissors into Wave mod. Abandoning that and now going for the much more useful large driver and opener side by side on the other side. Feels right. Some work to do on the large tool deployment and small tool locking
before pics.It was easy to do it because I happened to get an unfinished file.
But with some care and minimal work you should get it locking up ok.
-
Nice job Zoid! Now...what was that about the chance to win it?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

