Knurled Leatherman Screws made easy
-
So I have been taking apart a few Leathermans, and I found a pretty easy way of dealing with everyone's favorite screws.
The only hardware required would be a medium locking plier and a spare needle nose plier (I used a leatherman kick.
This Rebar Head was apart in 4 minutes, and that includes taking pictures. I reassemble them the same way.
Since pics are worth a thousand words:




-
The last picture compares the screw and post. The post is a little thinner, which makes it a little easier to grip and turn the screw with your needle nose pliers. Obviously, the locking pliers keep the post from turning while you undo the screw.
-
@Jfowler1 said:
The last picture compares the screw and post. The post is a little thinner, which makes it a little easier to grip and turn the screw with your needle nose pliers. Obviously, the locking pliers keep the post from turning while you undo the screw.That is interesting. All the ones I have done were the opposite. Random.
-
Yeah ... I thought I was taking crazy pills too because I was pretty sure that I had read the thin sides were the screws.
The big point to remember is that the screw should turn easily.
-
Why didn't I think of that!
Well done much easier now.
-
Very cool. Thanks for sharing.
-
Great post man thanks.
So you come at the screw at a 90 degree angle with the needlenose pliers?
When reassembling do you guys use some loctite?
-
Yeah - the 90 degree angle works really well. It is effective because it doesn't really grab the post at all - it just holds the post in place while you unscrew the fitting from the other side. It also gives you a nice big surface to clamp down on rather than trying to clamp down on the tiny post head.
I have a bottle of red loctite, but I have not used it yet. I'll get back to you if I find the screws loosen with use.
-
Oops - I did not read your question correctly. I hold the needle nose pliers on the same plane as the screw head - I found it easier to apply torque that way.
-
I use blue loctite for the final assembly of my mods.

-
Nail polish works in a pinch if you don't have any loctite.
-
Not sure they have army issue nail polish in Afghan.

Maybe they do in UCP, never know. -
Neat, I just did something like this but pretty differently. I twisted my bench vise down on the head of some lineman's pliers that were in turn gripping one end of the knurled pivot. I then used another pair of pliers to turn the other end of the screw. Before my eventual success with the bench vise, I had tried a pair of vise grips and got nowhere, I never figured on your solution. I also had no luck with that one guy's way of pounding a slightly smaller socket onto the screw. Just kinda neat how different and numerous all the solutions are for this annoying little problem.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
