Go Buck yourself!
-
@dks said:
the consent seems to be that they do not make them like they used to, but they are still good for the money.also, until a couple of years ago they use to mark seconds, but now they just sell them with no distinguishing mark, so it is easier to get a slightly faulty one
About them not making them like they used to. I was under that impression as well and it is a shame as it is a trend I see in almost every single manufactured product made today. From Buck to Leatherman, to cars, and kids toys. Literally anything you can think of is of lesser quality than it was in the past. Not to mention more expensive. Its all about mass production at the lowest cost to yield the highest profit. It really is a shame.
As far as them not marking the seconds. I assume you mean products they find to not be up to par. My question is why would they even acknowledge them as seconds if they just sell them along with the rest. Makes no sense to me.
-
Basically, they used to mark seconds and sell them cheaply.
I got a couple and they have a marking on the blade showing that. The price was lower than the regular ones.
For some reason (There was a thread/mention in BF) they decided that if these seconds were good enough to sell (minor, non safety related issue), then they would not mark them, but still sell them cheaper. So the 1st buyer will know that they are not 100% but whoever buys them next will not, unless the problem is obvious.
On mine I think the finish on the handles is not perfect, but then I think the same about nearly all knives.. :D
-
@dks said:
Basically, they used to mark seconds and sell them cheaply.I got a couple and they have a marking on the blade showing that. The price was lower than the regular ones.
For some reason (There was a thread/mention in BF) they decided that if these seconds were good enough to sell (minor, non safety related issue), then they would not mark them, but still sell them cheaper. So the 1st buyer will know that they are not 100% but whoever buys them next will not, unless the problem is obvious.
On mine I think the finish on the handles is not perfect, but then I think the same about nearly all knives.. :D
Ah ok. If they sold them cheaper then that is alright with me (Not that it matters).
-
Here is what I noticed last night. If you close the blade and let it snap closed this is what happens every single time.
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Knife and MT 2/DSC03221_zps3c65817e.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife and MT 2/DSC03221_zps3c65817e.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
@captain spaulding said:
Here is what I noticed last night. If you close the blade and let it snap closed this is what happens every single time.<a href="http://s927.photobucket.com/user/ChadV_2010/media/Knife and MT 2/DSC03221_zps3c65817e.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife and MT 2/DSC03221_zps3c65817e.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
:o That is not good...
Can you push it further in (and will it stay)?
-
@captain spaulding said:
Here is what I noticed last night. If you close the blade and let it snap closed this is what happens every single time.<a href="http://s927.photobucket.com/user/ChadV_2010/media/Knife and MT 2/DSC03221_zps3c65817e.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife and MT 2/DSC03221_zps3c65817e.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
:ahhh :ahhh :ahhh
I don't generally care that much about cosmetic issues such as gaps along backspring, slight scale defects, steps between scales and bolsters, raised rivets, minor chips and scratches .... but that there is inexcusable and a complete deal breaker for me. That would be going back if it were mine
-
@50ft-trad said:
@captain spaulding said:
Here is what I noticed last night. If you close the blade and let it snap closed this is what happens every single time.
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Knife and MT 2/DSC03221_zps3c65817e.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife and MT 2/DSC03221_zps3c65817e.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
:ahhh :ahhh :ahhh
I don't generally care that much about cosmetic issues such as gaps along backspring, slight scale defects, steps between scales and bolsters, raised rivets, minor chips and scratches .... but that there is inexcusable and a complete deal breaker for me. That would be going back if it were mine
It will rest lower than that, but I have to manually push it in every time. :(
-
@captain spaulding said:
@50ft-trad said:
@captain spaulding said:
Here is what I noticed last night. If you close the blade and let it snap closed this is what happens every single time.
<a href="http://s927.photobucket.com/user/ChadV_2010/media/Knife and MT 2/DSC03221_zps3c65817e.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i927.photobucket.com/albums/ad112/ChadV_2010/Knife and MT 2/DSC03221_zps3c65817e.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
:ahhh :ahhh :ahhh
I don't generally care that much about cosmetic issues such as gaps along backspring, slight scale defects, steps between scales and bolsters, raised rivets, minor chips and scratches .... but that there is inexcusable and a complete deal breaker for me. That would be going back if it were mine
It will rest lower than that, but I have to manually push it in every time. :(
I had this exact same problem on my paperstone 112, which granted is made a little differently, but after a while it worked itself out. Maybe the pivot loosened up a little or something. I kept mine in the belt sheath, so safety wasn't really an issue. If I had carried it in my pocket, that would have made me uneasy.
Sent from a very small screen.
-
Regarding quality going down, you're right that it's everywhere. I have my moms pressure cooker she bought for herself when she graduated high school in 1968. It's still going strong when other various appliances have died or turned faulty in only a few years.
Great photos, as always Cap'n.

-
Another disappointing folder, I'd surely return or exchange that one. Darn the luck there Capt.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
