My newest tool, the Mega Pry!
-
So here is the prototype of my latest tool and the object of my soon to launch Kickstarter project, the "Mega Pry"! This is a modular tool made of two tools that can be used independently but join together for bigger jobs. One has a normal pry tip and the other has a 90 degree offset tip which enhances leverage by four times (verified by independent structural engineer) and can be used in situations where working space is an issue. Both are 6" x 1/4" (handle sections are 3/4" wide) made of 440c stainless steel treated to HRc54. I chose this material and hardness to give the tools a balanced blend of strength, toughness and corrosion resistance.
The U shaped notch at one end of each tool is 1/2" deep so that when joined the tool is 11", nearly doubling its length. The CNC machined ball grooves reduce weight while simultaneously increasing the tool's structural strength. I designed this tool with active duty military and fire rescue professionals in mind however I am sure everyone will enjoy the power, convenience and versatility of this tool. I will take many more photos and some video once they come back from heat treat and before the project launches. Any questions or comments are welcome, let me know what you think and thanks for looking!
-
I like it but I think the two halfs should lock together somehow
Also if you chisel ground the u shaped end it would be a good pry end .
Good luck and keep up the good work.
-
Might I suggest you PM Grant Lamontagne and enquire about R&D membership.
There's a section of the forum assigned to such as this
-
JAfromMn- If I did that then it wouldn't have a joint with no moving parts which is what I'm going for so that it doesn't wear out. The U shaped end is there only for the purpose of connecting them so I can't grind that as it would weaken it.
Sorry 50ft-trad, I'll get to that soon
-
I really like it.
Although....instead of she's the carry only, a lanyard carry hole would be awesome
-
I could do some like that after they come back from the fab shop, no problem.
-
I've been talking with Olaf about his new tool going to kick start and I like it, it's very different than anything else on the market. There's many tools available for serviceman out there like the coptool from Wilson, CRKT pry bar for firefighters, etc. they are all great but they are job specific tool that we're designed for the job those people do.
One piece tools;this could be consider one even though the two independent halves can become one; have all been pretty cookie cutter over the years. All designers copying each other and no one really infusing any major changes that make you go, wow, why didn't someone else think of that.
This tool can most certainly be a tool that an officer, firefighter, or EMS can use. I see this tool being great for the everyday person as well, there are many situations this could be potentially used in. I see some guys out there thinking bug out bag and this tool would be great in those situations too.
I'll keep you guys posted on this products development for those that would like to keep up with it and see it I production.
Sent from my iPhone using Tapatalk
-
Have you done any testing with the prototype yet? With great force?
You definitely need to have a locking joint. I use pry bars a fair bit at work and I know the result of the odd pry bar slippage, not pretty when your really giving it all your strength. I don't wanna sound negative but I don't think a 1/2 inch slot is gonna hold up very well to seriously forceful prying/ ripping action from say a fire fighter in an emergency or a police officer doing a raid. I if it was lockable it would be much safer to use and much more appealing to your market.
A groove (think claw hammer) on the chisel point of the flat pry bar would also appeal to other markets such as construction or demolition industry and wouldn't compromise any great deal of structural integrity.
Just my opinion.

-
At first glance these look very cool

-
@enki_ck said:
Sorry to have to pull your post, but it is in violation of our forum policies on advertising.
As this is a privately owned and members funded forum we can't allow you to advertise for free here. We have members here paying for the privilege to advertise and allowing you to do so for free wouldn't be fair to them. If you're searching for input and thoughts on projects you'll need to upgrade your account to a Research and Development subscription you can buy here for only $10 for 30 days or $100 a year.
Then you'll be able to post links to your project in our R&D subforum.
Or if you're trying to fund your project, check out our Crowd Funding board.
Be sure to read Multitool.org Think Tank Rules too.
If you have any more questions or would like arrange options for advertising your tool, please contact Grant Lamontagne, the site owner via private message.
Nice to have you with us and you can enjoy the forum and take part in the discussions, but don't advertise anymore until you've made arrangements to do so with the forum owner.

Did you contact the Boss in Oct?
@DazMechanical said:
Have you done any testing with the prototype yet? With great force?You definitely need to have a locking joint. I use pry bars a fair bit at work and I know the result of the odd pry bar slippage, not pretty when your really giving it all your strength. I don't wanna sound negative but I don't think a 1/2 inch slot is gonna hold up very well to seriously forceful prying/ ripping action from say a fire fighter in an emergency or a police officer doing a raid. I if it was lockable it would be much safer to use and much more appealing to your market.
A groove (think claw hammer) on the chisel point of the flat pry bar would also appeal to other markets such as construction or demolition industry and wouldn't compromise any great deal of structural integrity.Just my opinion.

This
I also use a pry and I really need it to be solid, I wouldn't want to rely on a joint in an emergency -
Only time will tell as this tool develops if the joint will be strong enough to handle the forces being applied to it without any kind if lock involved. I'm not sure exactly how strong a forces we are talking here so all of this is subjective.
Sent from my iPhone using Tapatalk
-
@sparky415 said:
... This
I also use a pry and I really need it to be solid, I wouldn't want to rely on a joint in an emergencyI have beat on pry bars with a hammer when the situation demanded. I would be hesitant to do that on a multi piece pry bar.
-
Sorry to have to pull your post, but it is in violation of our forum policies on advertising.

As this is a privately owned and members funded forum we can't allow you to advertise for free here. We have members here paying for the privilege to advertise and allowing you to do so for free wouldn't be fair to them. If you're searching for input and thoughts on projects you'll need to upgrade your account to a Research and Development subscription you can buy here for only $10 for 30 days or $100 a year.
Then you'll be able to post links to your project in our R&D subforum.
Or if you're trying to fund your project, check out our Crowd Funding board.
Be sure to read Multitool.org Think Tank Rules too.
If you have any more questions or would like arrange options for advertising your tool, please contact Grant Lamontagne, the site owner via private message.
Nice to have you with us and you can enjoy the forum and take part in the discussions, but don't advertise anymore until you've made arrangements to do so with the forum owner.

Did you contact the Boss in Oct?
You're right Tony, looks like the only posts this guy made before were self-advertising ones too
-
I had forgot that this was the site that I had a problem posting in before so I'll take care of that before I post anything else. Yes I posted my product here to advertise it, what better place than a multi tool forum? I'll get on the rights to sell/advertise and then I'll post updates.
-
@olaf_anderson said:
I had forgot that this was the site that I had a problem posting in before so I'll take care of that before I post anything else. Yes I posted my product here to advertise it, what better place than a multi tool forum? I'll get on the rights to sell/advertise and then I'll post updates.Good Call..

-
@olaf_anderson said:
I had forgot that this was the site that I had a problem posting in before so I'll take care of that before I post anything else. Yes I posted my product here to advertise it, what better place than a multi tool forum? I'll get on the rights to sell/advertise and then I'll post updates.Superb!

We'll look forward to the future updates

-
What if you just made a "notch" and a band that goes around the joining section?
Or maybe some dimples and ridges that allow them to be clicked together. Similar to a ratchet and socket.
-
@NKlamerus said:
Or maybe some dimples and ridges that allow them to be clicked together. Similar to a ratchet and socket.
It's called a ball detent, it will allow the user to hold the tool one handed in extended form instead of having to carry 2 seperate smaller pieces.
-
I really don't see why the 1/2 inch cutouts wouldn't hold. As long as it's a tight fit; the force of the user just pushes one end of the cutout against the frame of the other tool and should remain in place. I'm talking forces in a vertical or horizontal position, you start moving in ways that compromise the two joints I can see it not holding but up/down movements should be OK. I've seen tight tolerance when pieces fit together on some of my pocket knives and the fit between these two pieces would have to be at least that tight to work without fail.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login







