Gerber TurboDiesel
-
I've always had my doubts about the flat Phillips but other than that the Diesel is a pretty nice tool. Nice mod

-
@sawman said:
I've always had my doubts about the flat Phillips but other than that the Diesel is a pretty nice tool. Nice mod
I know what you mean Steve, but in fairness the Grappler's one worked quite well, and I've never had any real issues with the LM bits (which are essentially the same profile). The Wingman and Sidekick seem to have their fans round here too :D
My only real concern is if I overtorque it with the full 3D bit adaptor in place. Should that happen though, I'll switch it (and something else) out to put in the one from the DET
-
Good job buddy, looks very good!
-
Thanks mate :)
-
@50ft-trad said:
Obviously not much love for the Diesel round here :DI had to read the whole thing twice to understand it as I'm a Gerber Noob. It looks like a good tool and I second the combination of bladeless MT + dedicated folder.
Would you post a picture of your Diesel next to a MP600 for me, please?
-
@50ft-trad said:
Obviously not much love for the Diesel round here :D
I had to read the whole thing twice to understand it as I'm a Gerber Noob. It looks like a good tool and I second the combination of bladeless MT + dedicated folder.
Would you post a picture of your Diesel next to a MP600 for me, please?
I don't have a stock MP600 for comparison, but I will try to take some meaningful pics alongside what's left of the DeSTroyer mod. Is there anything particular you are wanting comparisons of?
-
@50ft-trad said:
@50ft-trad said:
Obviously not much love for the Diesel round here :D
I had to read the whole thing twice to understand it as I'm a Gerber Noob. It looks like a good tool and I second the combination of bladeless MT + dedicated folder.
Would you post a picture of your Diesel next to a MP600 for me, please?
I don't have a stock MP600 for comparison, but I will try to take some meaningful pics alongside what's left of the DeSTroyer mod. Is there anything particular you are wanting comparisons of?
No, just the size. I have a hard time going from numbers...
-
@50ft-trad said:
@50ft-trad said:
Obviously not much love for the Diesel round here :D
I had to read the whole thing twice to understand it as I'm a Gerber Noob. It looks like a good tool and I second the combination of bladeless MT + dedicated folder.
Would you post a picture of your Diesel next to a MP600 for me, please?
I don't have a stock MP600 for comparison, but I will try to take some meaningful pics alongside what's left of the DeSTroyer mod. Is there anything particular you are wanting comparisons of?
No, just the size. I have a hard time going from numbers...
No problem
I have to go out shortly, but I'll try to do this when I get back 
-
I like the looks of the Turbo Diesel. I don't think I would have opted for two saw blades but I can certainly rationalize taking that blade out and carrying a separate blade for several reasons with this tool.
-
@50ft-trad said:
Obviously not much love for the Diesel round here :DI wouldn't worry about that much, it's kind of disheartening sometimes when you put all the effort in taking pics and posting a write-up and there's hardly a single page of responses. Most of us have been through that. Just ask Chako who is one of many with great posts and sometimes very little responses.
Rest assured people still read your and posts of others and enjoy the content, it's just that they don't tend to respond and comment much these days. It's the way of online forums in general, at least this is something I noticed being a member of dozen other forums around.
BTW, great mod and while I am one of many who doesn't normally share your discontent and poking a stick at Leatherman tools, this Gerber I like very much. Maybe Gerber should take notice and create one of knife-less Diesels as standard offering, like they did with an MP600. ;)
Keep up the good work, mate!

-
Very


And looks like a useful tool too. :D
-
@50ft-trad said:
@50ft-trad said:
[quote author=50ft-trad link=topic=56931.msg1022458#msg1022458 date=1420941253]
Obviously not much love for the Diesel round here :DI had to read the whole thing twice to understand it as I'm a Gerber Noob. It looks like a good tool and I second the combination of bladeless MT + dedicated folder.
Would you post a picture of your Diesel next to a MP600 for me, please?
I don't have a stock MP600 for comparison, but I will try to take some meaningful pics alongside what's left of the DeSTroyer mod. Is there anything particular you are wanting comparisons of?
No, just the size. I have a hard time going from numbers...
No problem
I have to go out shortly, but I'll try to do this when I get back 
[/quote]Are these any good for you ...? I thought I'd throw in a quick comparison of the two Phillips drivers too. The Diesel is above and the modified MP600 is below in all pics. Please also note that the amount that the heads protrude will vary according to the type fitted (needle nosed, blunt nosed, fishing pliers, or the Paul Chen shears in the model shown)



-
@Nhoj said:
I like the looks of the Turbo Diesel. I don't think I would have opted for two saw blades but I can certainly rationalize taking that blade out and carrying a separate blade for several reasons with this tool.Yeah, I can see that standard tanto-esque blade being a turn off for many users. As to having two saw blades, I see your point, but it doesn't pose too much duplication really. The Remgrit blade will be left in there for the most part (because it's matches the looks of the tool) unless I need to switch it for a metal cutting jigsaw blade. As I see it, the fitted woodsaw and file will pick up most of what is needed, but the blade exchanger is there just incase there's something that the others would struggle with. I might even source a couple of rough/fine toothed wood blades fo compliment the fitted saw for cutting stuff that's particularly sappy/claggy, or plastics, or whatever ...
-
@50ft-trad said:
Obviously not much love for the Diesel round here :D
I wouldn't worry about that much, it's kind of disheartening sometimes when you put all the effort in taking pics and posting a write-up and there's hardly a single page of responses. Most of us have been through that. Just ask Chako who is one of many with great posts and sometimes very little responses.
Rest assured people still read your and posts of others and enjoy the content, it's just that they don't tend to respond and comment much these days. It's the way of online forums in general, at least this is something I noticed being a member of dozen other forums around.
BTW, great mod and while I am one of many who doesn't normally share your discontent and poking a stick at Leatherman tools, this Gerber I like very much. Maybe Gerber should take notice and create one of knife-less Diesels as standard offering, like they did with an MP600. ;)
Keep up the good work, mate!

I know, don't worry, my comment was a bit tongue in cheek :D
Many thanks for your kind comments
I think this could prove to be quite a reliable and versatile tool 
-
Thanks for those pictures
, now I have a good idea about their relative sizes, very helpful. -
@Etherealicer said:
Thanks for those pictures
, now I have a good idea about their relative sizes, very helpful.Cool
Apologies for not being clear enough first time round 
If anyone else has any queries, please shout up

-
@50ft-trad said:
Obviously not much love for the Diesel round here :DI was unfamiliar with the Diesel and read your post last night while I frantically searched the forum for info. There was a new Diesel for sale on eBay for quite a low price, but it was sold by the time I completed my research. :(
To mitigate the damage, I ordered a Leatherman OHT. ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
