One of the reasons I keep picking Gerber over Leatherman ...
-
@Yalius said:
You're using your pliers wrong. You'll get much better leverage and a more controllable grip if you slip your pinky off the handles entirely and use just your index, middle, and ring fingers, but as close to the ends of the handles as possible. Use the plier handles as a lever to gain maximum mechanical advantage and remember that a little extra lever length is much more useful than your pinky being in the most advantageous position.If I understand you correctly, then you are suggesting to grip further back. However, the whole point of this thread is that the handles need to open very wide, gripping further back only intensifies the issue.
-
You're using your pliers wrong. You'll get much better leverage and a more controllable grip if you slip your pinky off the handles entirely and use just your index, middle, and ring fingers, but as close to the ends of the handles as possible. Use the plier handles as a lever to gain maximum mechanical advantage and remember that a little extra lever length is much more useful than your pinky being in the most advantageous position.
If I understand you correctly, then you are suggesting to grip further back. However, the whole point of this thread is that the handles need to open very wide, gripping further back only intensifies the issue.
^^^ This!
I took all this photos the same way (with the wrong hand) for illustrative purposes just to show the amount of grip I have/haven't got available on the various tools. I will obviously adjust my grip according to what I'm doing, but if the grip is too splayed, or gripping further back on the handles takes the grip out of efficiency, then that's not going to offer any advantage whatsoever. Probably the reverse. In fact if you look at the photos, I would be unable to achieve that grip at all on many of the items shown ... and that's with size 9 hands. People with smaller hands would find them even worse.
-
No issues with the photo borrowing. All MT.O members can borrow them.
As for the finger extensions...classic.

-
We need a cobra pliers based multitool for small hand people. And I also look for a small knipex, but damn they are so expensive here...
Another way is to have handle with a very small angle when pliers are closed, reducing the angle when they are at full opening. -
:D :D
@Yalius said:
You're using your pliers wrong. You'll get much better leverage and a more controllable grip if you slip your pinky off the handles entirely and use just your index, middle, and ring fingers, but as close to the ends of the handles as possible. Use the plier handles as a lever to gain maximum mechanical advantage and remember that a little extra lever length is much more useful than your pinky being in the most advantageous position.This has actually given me an idea for an additional comparison which factors in both our standpoints ... I'll think through how best to approach it ...
-
@hellsing said:
We need a cobra pliers based multitool for small hand people. And I also look for a small knipex, but damn they are so expensive here...
Another way is to have handle with a very small angle when pliers are closed, reducing the angle when they are at full opening.They're expensive here too ...
One thing you have to be careful of when the pliers are closed is avoiding a pinch hazard like on the original Gerber multipliers. They hurt!!!
-
@50ft-trad said:
and that's with size 9 hands. People with smaller hands would find them even worse.
No, i don´t (size 8.5).
But one reason might be that i see no need to grip such big stuff, for those kind of work tools are existing that suit better than any MT.
Fair point

When gripping smaller items, the mechanics of the situation would be different (easier for the user), though I would counter the "better work tools" arguement by suggesting that the reason for a multitool is when there is no access (or no convenient access) to such tools. I too generally have to grip smaller workpieces, but there are times when my pliers need to be used at a fuller capacity. If I was never gripping anything bigger than 1/4" or 6mm, then I wouldn't have to consider such big tools in the first place.
Case in point ... most peple consider the Wenger 130mm pliers to be underrated for their needs, and indeed they were unable to grip the lighter at all. I actually took these pics at the same time, but had no need to post them before as they didn't help the conversation


Wenger Rangergrip 90This is a tool with smaller pliers and yet larger knife/saw etc, but again people don't see these pliers as being big enough. With more plier capacity, that is where this problem of ergonomics occurs most
-
Have you considered something like a Schrade Vise-grip ?
??? -
@dks said:
Have you considered something like a Schrade Vise-grip ?
???
The locking pliers (Schrade Vise Grips, Crunch, Grappler) do all negate this problem by virtue of their adjustment ... which is why I haven't included them in this comparison.

I currently own the Grappler and the 6LC. Neither of them get much use, but both can be very useful when certain jobs arise (the 6LC moreso on larger workpieces) ... assuming you have access to them at the time. For general carry and use, standard pliers are more useful/diverse/capable for the types of scenario I am liable to encounter

-
Well, I may have to get one, one of these days....
-
Al, what a great thread. This is a point I've made a couple of times over the years, but never so well explained and pictured. You mention the PST being less of a problem in this regard and I agree, I'd also like to add that the original Supertool and the Pulse I find to be better than that later models. IIRC the original Wave is also the same, but I don't have one to try out and be sure.
-
@50ft-trad said:
We need a cobra pliers based multitool for small hand people. And I also look for a small knipex, but damn they are so expensive here...
Another way is to have handle with a very small angle when pliers are closed, reducing the angle when they are at full opening.They're expensive here too ...
One thing you have to be careful of when the pliers are closed is avoiding a pinch hazard like on the original Gerber multipliers. They hurt!!!
Have you checked out the Knipex Alligator Pliers? They might be a little cheaper than the Cobras.
-
@Gareth said:
Al, what a great thread. This is a point I've made a couple of times over the years, but never so well explained and pictured. You mention the PST being less of a problem in this regard and I agree, I'd also like to add that the original Supertool and the Pulse I find to be better than that later models. IIRC the original Wave is also the same, but I don't have one to try out and be sure.Thanks Gareth

If you want to, feel free to post a piccy of you holding any one of the tools I've shown (for calibration) and then piccies of the Pulse and Supertool/ST200. I don't have those tools to "catalogue" here, but I believe you still do ;)
Same goes for anyone else wanting to add comparative pics for future reference

-
@50ft-trad said:
We need a cobra pliers based multitool for small hand people. And I also look for a small knipex, but damn they are so expensive here...
Another way is to have handle with a very small angle when pliers are closed, reducing the angle when they are at full opening.They're expensive here too ...
One thing you have to be careful of when the pliers are closed is avoiding a pinch hazard like on the original Gerber multipliers. They hurt!!!
Have you checked out the Knipex Alligator Pliers? They might be a little cheaper than the Cobras.
They were Knipex pliers that I was looking at, Joe. At the moment I have no need to be spending extra money anyway :P so I might have another look at them in a month or two

-
Try like this. 3/4" (19mm) diameter-- your longer, stronger fingers will have more leverage and will be more comfortable than stretching your pinky all the way to the end-- stronger grip and more comfortable at once.
-
@Yalius said:
Try like this. 3/4" (19mm) diameter-- your longer, stronger fingers will have more leverage and will be more comfortable than stretching your pinky all the way to the end-- stronger grip and more comfortable at once.As I said earlier, I always adjust my grip to suit the job at hand and gain the most control and mechanical advantage. I only took the pictures as uniformly as I did so that it was clear for the viewer what the differences were between the tools.

It might be that the grip you showed there might work with some tools in some situations, but try that with a Swisstool (or many other tools) in an oil rich environment, and the next thing you'll be doing is walking across the room to fetch it after it shoots out of your hand like wet soap :D In fact I just tried to see if I could actually get the span to do this with a Swisstool, and I would have absolutely no control or power with the handle splay generated by having that lighter in the jaws.
Different tools, different jobs, different environments, all require different approaches to the tools. My point with this thread is that my options with one of the Gerber's would be better than with one of the Leatherman's or the Powerlock, or even the Swisstool. This is purely due to the fact I can get better grips, and indeed different types of grip, because the handles offer better ergonomics. Lots of attention is often paid to whether a knife is inboard or outboard, OHO or 2HO, how well drivers grip and what reach they have, but for me (and it appears others too) the ergos of the pliers are a real factor in whether a tool works well for me or not

-
OP
Excellent commentary, thanks for taking the time to post w/ pictures
You really pointed out a "pro" for the Gerber MP
-
@Marcellus said:
OPExcellent commentary, thanks for taking the time to post w/ pictures
You really pointed out a "pro" for the Gerber MP
Thank you
I appreciate the comment 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

