Another BO knifeless mod
-
That's nice Al!
I think you'll be getting a PM shortly

-
Cheers John

-
Great mod! I've never really liked my rebar for some reason but I do like that toolset and especially what I consider to be a better plier head on there!
-
Thanks John
I'm not a fan of the Rebar blades ... they just don't fill me with confidence. I tried to put one in from a Fuse but it's too long, so I went completely knifeless instead. I also had to drop the can opener and lanyard lood, but a BO can opener is a bad idea anyway. As for the pliers ... yeah, I prefer these to the indexable ones too -
I really like that load out. Once again well done!
-
Thanks mate :)
-
HELP!
I'm doing the same mod as Al did,except in SS. On Al's advice I got a set of the fancy engineers pliers off Amazon. The screw on the PE blade slide has come out sweet as a nut. The pivot barrel is indented making it nice and easy.
Seems like the SE side has a fully round pivot barrel as its rotating freely. Without getting a second set of engineers pliers how can I get a decent grip on the knurled screw?
-
Crunch, or a good firm grip on a Wave works for me. Have you tried heat to break the Loctite?
-
Just a heads up, John .... I think I'm going to need to take mine apart and play with it again. I'm really not happy with the way the file is catching, and the tools keep slopping out of the tool on that side a bit (kind of like on your Gerber Fit). I think I need to add more washers on that side to create more clearance, but that is going to overfill the pivot pin which means it won't locate fully in the opposing handle. The saw side as I have it configured is working fine.
This needs to go back to the proverbial drawing board for a rethink before I'll be fully happy with it. If you get a configuration you are happy with, give me a yell and let me know what you ended up with

-
Hey Kirky Boy, you got yours done yet?
Same set up as mine, or have you put them back in a different order? -
Thanks for bumping this, somehow I had missed it.
About to start on a MT for the kids which I had wanted to be knifeless but they are insisting on a blade. ::)
How you got any pics showing the ends?
-
@50ft-trad said:
Hey Kirky Boy, you got yours done yet?
Same set up as mine, or have you put them back in a different order?Funny you bump this tonight,I just got the second set of tools out. I'm watching the end of Smileys People on BBC4,and I might have a go at assembly.
I'll get back to you later with a progress report

-
@zoidberg said:
Thanks for bumping this, somehow I had missed it.About to start on a MT for the kids which I had wanted to be knifeless but they are insisting on a blade. ::)
How you got any pics showing the ends?
Not showing the ends, Zoidie ... what is it you're wanting to see? Sequence of tools? If it's where you need to put the washers, that's a work in progress as the file is fouling on mine ;)
-
@50ft-trad said:
Hey Kirky Boy, you got yours done yet?
Same set up as mine, or have you put them back in a different order?Funny you bump this tonight,I just got the second set of tools out. I'm watching the end of Smileys People on BBC4,and I might have a go at assembly.
I'll get back to you later with a progress report

Nice one John

-
@50ft-trad said:
Thanks for bumping this, somehow I had missed it.
About to start on a MT for the kids which I had wanted to be knifeless but they are insisting on a blade. ::)
How you got any pics showing the ends?
Not showing the ends, Zoidie ... what is it you're wanting to see? Sequence of tools? If it's where you need to put the washers, that's a work in progress as the file is fouling on mine ;)
Yeah just the washer placement when you are done.

-
@50ft-trad said:
Thanks for bumping this, somehow I had missed it.
About to start on a MT for the kids which I had wanted to be knifeless but they are insisting on a blade. ::)
How you got any pics showing the ends?
Not showing the ends, Zoidie ... what is it you're wanting to see? Sequence of tools? If it's where you need to put the washers, that's a work in progress as the file is fouling on mine ;)
Yeah just the washer placement when you are done.

OK mate, I'll try to find time to have another play with this project at the weekend

-
Well,I got the Rebar rebuilt last night.
I used Al's tool load as a guide,but changed one or two things due to fit issues...
On one side,starting from the cutaway is two slim washers;file;slim washer;phillips;scissors;can opener.
The other side is large washer;saw;awl;bit driver;small screw driver
I went with the Rebars small flat driver simply because I didn't have a Fuse type to substitute. I'm still puzzled by this,because I'm sure I've got one some where

I just couldn't get a smooth enough operation of tools on the file side with the large flat driver,but the can opener is a slight thinner.
I'd been disappointed last night with the overall smoothness of movement of the tools,but I've been playing with it while writing,and while it's nowhere near as good as my modded Fuse or stock Blast,it's not all that bad. To be fair,I wasn't over impressed with it before hacking it

I'll post pics later.
I might pull out my Kick at the weekend,and have another look at things ???
I'm also considering going the whole hog and fitting Wave type pliers
That would make it Kirkys Fubar? -
I have Wave type pliers in mine already ... cap crimper ones as it happens. I'll have a play around with the load out when I get chance, as the file on mine was not just catching the handles, but the adjacent tool too ... although for some reason that didn't happen when I first built it, it kind of crept in afterwards ...
I'll have a faff around and see what happens. Thanks for the update John

-
No worries Al. Funnily,my file was catching and grating more last night than it did today. Gotta say though,getting into the guts of the Rebar hasn't endeared it to me in any way. It's just not as well built as the old PST or the Zytel tools
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

