Silver or not?
-
Well.. crossfingers guys. I'm getting it tomorrow at noon. Neodinum magnets in pocket to check for steel and steady hand to check for alox... :P
-
Magnets wont stick to rostfrei, or tin. Scratch test for silver and tin. Aluminium feels warm in hands faster than rostfrei, tin or silver.
-
Vic blades are iron and evidently so are Altoids "tins" as magnets don't stick to tin. Altoids may be tin plated over iron?? (retired chemistry prof.)
-
I have the same marking on a sterling silver barleycorn vic.
(Markings in this image are up side down.)
Looking at it upside down, the word on the right says 'sterling'. The next marking to the left, in an oval indent says '.925'. The next marking is a thick 'Y' shaped logo of some kind, and the far left indent with the triangular tips says "SABL'.Strong magnets stick to my silver knife scales (and the rostfrei blades), but weak ones don't. Neodymium magnets will surely stick due to their power.

-
@ScottP said:
I have the same marking on a sterling silver barleycorn vic.
(Markings in this image are up side down.)
Looking at it upside down, the word on the right says 'sterling'. The next marking to the left, in an oval indent says '.925'. The next marking is a thick 'Y' shaped logo of some kind, and the far left indent with the triangular tips says "SABL'.Strong magnets stick to my silver knife scales (and the rostfrei blades), but weak ones don't. Neodymium magnets will surely stick due to their power.
Thanks, you made me feel more at ease. Indeed he said 925 not 975 - my bad.
Looking forward to my shiny (reckon I'll dip it in 7up to get the bling factor back).
If it doesn't bring back the shine, what would be the next steps? Maybe a dremel with some toothpaste? -
I have the same marking on a sterling silver barleycorn vic.
(Markings in this image are up side down.)
Looking at it upside down, the word on the right says 'sterling'. The next marking to the left, in an oval indent says '.925'. The next marking is a thick 'Y' shaped logo of some kind, and the far left indent with the triangular tips says "SABL'.Strong magnets stick to my silver knife scales (and the rostfrei blades), but weak ones don't. Neodymium magnets will surely stick due to their power.
Thanks, you made me feel more at ease. Indeed he said 925 not 975 - my bad.
Looking forward to my shiny (reckon I'll dip it in 7up to get the bling factor back).
If it doesn't bring back the shine, what would be the next steps? Maybe a dremel with some toothpaste?Don't destroy the knife! Use silver polish, which is made for the job. While you're at it, pick up a can of copper polish to use on 'German silver', brass, and other copper alloys used on bolsters and hilts.
-
"Strong magnets stick to my silver knife scales (and the rostfrei blades), but weak ones don't. Neodymium magnets will surely stick due to their power."
That's becakuse Neodynium magnets are strong enough to "feel" the blades thru the scales.
Silver is not magnetic.Rich
-
So.. it made it here.
1 - It's proper, honest-to-god sterling silver. Marking says Sterling-925-(something like an Y)-(something like SABL) if anyone understands what it says
2 - It's a mod. I am pretty sure this was a regular Sterling Silver Polished Classic and he fitted the scales to a Minichamp (explains the price, marking, logo and the wonky glue peeking out a bit)
3 - The silver is in reasonably good status. Some dings and scratches (obviously was carried with keys or change). I couldn't get proper silver polish so I used 7up. It made it shine really bright but didn't do much for the scratches. Any pointers on these? I'm thinking Starwax MultiMetal or Silver (real tricky to find though). Also reckon I can use the Dremel on low or just brushie by hand?
4 - The knife is in Fair condition. Nailfile is kind of worn, but cleaned up nice. Scissors were a bit dirty and hard to open but cleaned up nice too. Blade is factory-sharp, all tools have great spring action.. my only major gripe is with the Wharncliff - it was sharpened poorly, very blunt, has some scratches and isslightly crooked (few passes on position 1 on Lansky should fix it)
5 - Conclusion. Not perfect, far from it, but a very nice buy of a gorgeous, must-have knife in decent condition. For 40 Euros shipped I think it was a great deal and it will undoubtebly be one of my most prized saks... and a nice edc for home light use.


-
I would it just be, and use it. That blade will straighten, if you just pry it nicely. Mine did. If you want it as new, do scale swap again, and polish those scale by hand, and polishing paste.
Looks good. Great deal you got.
-
Very nice looking SAK!

-
@Rich S said:
"Strong magnets stick to my silver knife scales (and the rostfrei blades), but weak ones don't. Neodymium magnets will surely stick due to their power."That's becakuse Neodynium magnets are strong enough to "feel" the blades thru the scales.
Silver is not magnetic.Rich
That was meant to be my (poorly written) point. They "stick to my silver knife scales (due to the rostfrei blades inside of them.)
Corwyn, you've got a nice find there.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login