got in over my head, help me sweet baby jesus
-
I made a little tool to help line up those washers, it's basically a tapered cone to line up the washers when pressed into the pivot hole, kind of like a drift. :D Hope it works out better on future projects!
-
@Metropolicity said:
I made a little tool to help line up those washers, it's basically a tapered cone to line up the washers when pressed into the pivot hole, kind of like a drift. :D Hope it works out better on future projects!Good to have you posting a little more these days here at MT.O, Eric

-
@Metropolicity said:
I made a little tool to help line up those washers, it's basically a tapered cone to line up the washers when pressed into the pivot hole, kind of like a drift. :D Hope it works out better on future projects!I use a small nail setter for the same thing. :)
-
If I have to grind the scissors down that much I don't know if there even worth keeping sigh.
I need to come up with something to help align the washers it will save time that's for sure.
-
I made a little tool to help line up those washers, it's basically a tapered cone to line up the washers when pressed into the pivot hole, kind of like a drift. :D Hope it works out better on future projects!
Good to have you posting a little more these days here at MT.O, Eric

I try to pop in and help those in need :)
-
I made a little tool to help line up those washers, it's basically a tapered cone to line up the washers when pressed into the pivot hole, kind of like a drift. :D Hope it works out better on future projects!
Good to have you posting a little more these days here at MT.O, Eric

I try to pop in and help those in need :)
I need a P2 and a couple of Shields.

-
I made a little tool to help line up those washers, it's basically a tapered cone to line up the washers when pressed into the pivot hole, kind of like a drift. :D Hope it works out better on future projects!
Good to have you posting a little more these days here at MT.O, Eric

I try to pop in and help those in need :)
I need a P2 and a couple of Shields.

The squeaky wheel gets the grease, good try Harley.

-
[quote author=Metropolicity link=topic=56928.msg1023892#msg1023892 date=1421179599]
I made a little tool to help line up those washers, it's basically a tapered cone to line up the washers when pressed into the pivot hole, kind of like a drift. :D Hope it works out better on future projects!Good to have you posting a little more these days here at MT.O, Eric

I try to pop in and help those in need :)
I need a P2 and a couple of Shields.

The squeaky wheel gets the grease, good try Harley.

[/quote]Either that or Eric will spit on mine before it gets sent out.
-
I've been meaning to dremel the can opener and large flat driver but I've been putting it off. Sigh lol maybe today .
-
@tinkering2much said:
I've been meaning to dremel the can opener and large flat driver but I've been putting it off. Sigh lol maybe today .If you stopped posting you would have more time 4 dremel.

-
[quote author=babola link=topic=56928.msg1023898#msg1023898 date=1421180218]
[quote author=Metropolicity link=topic=56928.msg1023892#msg1023892 date=1421179599]
I made a little tool to help line up those washers, it's basically a tapered cone to line up the washers when pressed into the pivot hole, kind of like a drift. :D Hope it works out better on future projects!Good to have you posting a little more these days here at MT.O, Eric

I try to pop in and help those in need :)
I need a P2 and a couple of Shields.

The squeaky wheel gets the grease, good try Harley.

[/quote]Either that or Eric will spit on mine before it gets sent out.
[/quote]The worst you'll get is...what is less worse than spitting on your order? haha.
-
[quote author=Metropolicity link=topic=56928.msg1024056#msg1024056 date=1421204007]
[quote author=babola link=topic=56928.msg1023898#msg1023898 date=1421180218]
[quote author=Metropolicity link=topic=56928.msg1023892#msg1023892 date=1421179599]
I made a little tool to help line up those washers, it's basically a tapered cone to line up the washers when pressed into the pivot hole, kind of like a drift. :D Hope it works out better on future projects!Good to have you posting a little more these days here at MT.O, Eric

I try to pop in and help those in need :)
I need a P2 and a couple of Shields.

The squeaky wheel gets the grease, good try Harley.

[/quote]Either that or Eric will spit on mine before it gets sent out.
[/quote]The worst you'll get is...what is less worse than spitting on your order? haha.
[/quote]Extra Shields in with the order is way less worse.

-
Don't you judge me, I don't care if your right or not lol
I've been meaning to dremel the can opener and large flat driver but I've been putting it off. Sigh lol maybe today .
If you stopped posting you would have more time 4 dremel.

-
@tinkering2much said:
Don't you judge me, I don't care if your right or not lol
@HarleyXJGuy said:I've been meaning to dremel the can opener and large flat driver but I've been putting it off. Sigh lol maybe today .
If you stopped posting you would have more time 4 dremel.

Still putting it off huh?
-
Your being a stickler about this ?
honestly I needed a kick to get this done so thanks I'm working on it tonight. -
@tinkering2much said:
Your being a stickler about this ?
honestly I needed a kick to get this done so thanks I'm working on it tonight.this is why I don't tell Harley about any of the mods I'm working on... ::)
-
Your being a stickler about this ?
honestly I needed a kick to get this done so thanks I'm working on it tonight.this is why I don't tell Harley about any of the mods I'm working on... ::)
You working on some mods?
I do have a SS Rebar on the way that will be used for some Wave mod action. Just saying.

-
@tinkering2much said:
Your being a stickler about this ?
honestly I needed a kick to get this done so thanks I'm working on it tonight.Stickler.
One of the least offensive names I have been called today. Must be slipping.

-
Well I got the rebar handles and wave head together, unfortunately I lost one washer and the other washer REFUSED to allow the post to make it all the way. So one handle has both washers one on each side and the other handle has none lol And why in zeuses name did leatherman use these stupid round nut thingies to hold it all together? Sigh

-
@tinkering2much said:
Well I got the rebar handles and wave head together, unfortunately I lost one washer and the other washer REFUSED to allow the post to make it all the way. So one handle has both washers one on each side and the other handle has none lol And why in zeuses name did leatherman use these stupid round nut thingies to hold it all together? Sigh
With LM tools modding patience is a virtue. If this is your first mod than taking it all slowly and recording every step is crucial to success. We've all been through your pain at some stage, but most of us came out of it richer for the experience and lessons learnt.
Don't make this gnarly experience put you off future modding. Cut your losses and can on

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login