New SOG multis?
-
Good to see they are bringing out something new. Time will tell what the quality is like.
-
They put the can opener in the middle position again like on the Powerduo rendering it useless.

-
Well there has to be a short tool on either side of the Phillips, but if the can opener were swapped with the bottle opener, it would be closer to the edge than it is in the picture.
-
Take the can opener out, replace it with the bit driver.
-
They put the can opener in the middle position again like on the Powerduo rendering it useless.

Not that it makes it less foolish, but it looks like maybe it wouldn't fit with the long tools towards the middle? Still horrible design work, but maybe that's why?
The can opener has to be in the most outside position to work and so it can catch the rim of the can. Check all your other tools and SAKs, it's always on the outside layer.
In this one handle config they'd have to loose one of the long tools to make it work but they decided to add it to the middle anyways, probably just for the total tool count. ::)
@Etherealicer said:
Take the can opener out, replace it with the bit driver.Bit driver is twice the thickness. ;)
-
Take the can opener out, replace it with the bit driver.
Bit driver is twice the thickness. ;)
That is great, then you can loose the bloody can opener too...
Probably won't work, because of the Phillips, so you either would have to loose the Phillips or the awl.
-
Deep pocket carry it looks like! 65 $ is kinda too high for a gamble for me tho.
-
One of my biggest complaints about SOG's (besides those wacky covers) is that the tools are too bendy. It's really too easy to twist the can opener, bottle opener or awl. Oh, and I kept losing the little spring on the 1/4 driver (which I otherwise really liked).
-
Look s good, i am going to get one to try out.
It doesnt say how much it weights. -
@Mr. Whippy said:
One of my biggest complaints about SOG's (besides those wacky covers) is that the tools are too bendy. It's really too easy to twist the can opener, bottle opener or awl. Oh, and I kept losing the little spring on the 1/4 driver (which I otherwise really liked).Heat shrink tube it. ;)
to parnass

</post/629021>
-
Count me in. Compact, one hand access springy pliers, and it has a pocket clip! I will replace the blade at some point and it will be my new best friend. Way to go SOG
-
Just checked, they only sell to the US and Canada :ahhh
-
Deep pocket carry it looks like! 65 $ is kinda too high for a gamble for me tho.
It'll be a lot cheaper online or in stores. All the SOG stuff is listed way higher on the SOG website.
Yeah, I know. But I suddenly felt like ordering one and they are the only ones that have it (as far as I found, not that I checked that thoroughly).
Also I currently get a 15% strong Swiss Franc discount ;) -
I figured by the sounds of the conversation that dude from bladeforums had with the SOG exec, that it would be a revival of either the switchplier of the toolclip (or whatever that thing was called).
Looks like the tools lock. Did they on the original?

-
I will wait until retailers have them in stock to order one.
Don't want to pay MSRP ordering from SOG directly. -
@rdub934 said:
I figured by the sounds of the conversation that dude from bladeforums had with the SOG exec, that it would be a revival of either the switchplier of the toolclip (or whatever that thing was called).Looks like the tools lock. Did they on the original?
Yes, everything locked on the original tool

-
I am curious as to how 2.0 compares to the original. I am not familiar with the original tool so I won't have a reference point. What needed improvement on it? Looks like this one carries more tools.
-
@rdub934 said:
I am curious as to how 2.0 compares to the original. I am not familiar with the original tool so I won't have a reference point. What needed improvement on it? Looks like this one carries more tools.Bob (J-sews) took one apart to find out why the pliers kept breaking on people, and here's what he found ...


That tiny cast peg on the plier head was the only point at which the force was transmitted from the handles. Basically, use this for anything more than you would with let's say a Gerber Dime, and the peg would shear off. Unless this has had a MAJOR rethink, there will be no benefit in buying the newer model. SOG's website suggest this has their "patented" compound leverage system, which suggests that somehow they incorporated the system from their other "power" pliers.
However on the original, you could just lift the handle to access a driver of blade etc, and didn't need to "fire" the pliers out first. If they have incorporated the gearing system in, I'm not sure how that's going to work
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login