Dealing with nuts and bolts
-
If I'm at home, I go for the Snap-on socket wrenches.
On the bike, I usually have a limited number of sizes to worry about, and no motivation to lug around any extra.
Most everything on the mountain bike can be dealt with with the smaller one. The recumbent is a bit more complicated.
the SAK on the left has a stepped wrench (behind the bottle opener) that will handle a number of nut sizes.
The detachable wrench does 10mm. The handle of the chain tool does 5mm hex. The pliers will also do if nothing else will.

The small one can be twinned with the Topeak Toolbar:

Elsewhere, I'm still working on it.
There is the CRKG Guppie:

Wenger has put a bitdriver on their NewRanger Touring 174, and sockets can be adapted to that easily.
-
I agree with gafftapegreenia. Why not just toss in a 6" or 8" Crescent wrench along with your multitool? That way, if you have a bolt on one end and a nut on the other end, you'll be able to tighten or loosen it because you'll have a tool on both the bolt and nut ends. I have always felt a multi and crescent were good compliments of each other.
Mike
-
This thread certainly is offering a few good options.
Perhaps I have just been too cheap. My last 2 crescent wrenches slipped on stuck bolts and didn't really lock firmly in place. There was always a little play in the head. That's why I thought some people preferred locking wrenches. But maybe I just need to buy a better brand or model.
I want to look at some of the other tools listed, but maybe just a better quality locking or adjustable wrench is all that is really needed...
-
Locking wrenches have their place, but I use them as a last resort. As far an adjustable wrench, maybe SK, Mac, Snap-On, maybe even Craftsman would be a good places to start. Yeah, Crescent isn't really the best, just has name brand recognition. Like Kleenex is used to describe any facial or bathroom tissue. But yeah, I wouldn't over complicate things, just get a better adjustable wrench is all.
Mike
-
Well, that all depends. I have always carried a pocket knife with me, but just recently got back to carrying MTs, and never leave home without it. 2 years about my father in law got me a Maglite and a pair of vise grips and channel locks. He told me to never travel without at least a flashlight and some form of pliers.
Now If I am in the middle of nowhere and have nothing but a flashlight, channel locks and my Wave, than yes i would use it on a nut or bolt.
-
When I don't have real tools handy, I like my LM Crunch!
-
@mike said:
I agree with gafftapegreenia. Why not just toss in a 6" or 8" Crescent wrench along with your multitool? That way, if you have a bolt on one end and a nut on the other end, you'll be able to tighten or loosen it because you'll have a tool on both the bolt and nut ends. I have always felt a multi and crescent were good compliments of each other.
MikeFor my regular toolbag, I think I will look into just getting a nicer wrench of some sort. But I was also wondering if there was anything a little more portable that I could throw in my edc bag.
But the Guppie and those Topeak tools that Andy posted are really cool. Shame their isn't a Guppie Sr. which could handle 1 inch. That would be perfect. There are definitely lots of neat options for 1/2 inch and under though...
-
How about an adjustable locking wrench? http://www.sears.com/shc/s/p_10153_12605_00973567000P
Adjustable Muscle Wrench? http://www.amazon.com/Alltrade-070002-Position-Muscle-Wrench/dp/B000FK6YZK
Mike
-
@mike said:
Locking wrenches have their place, but I use them as a last resort. As far an adjustable wrench, maybe SK, Mac, Snap-On, maybe even Craftsman would be a good places to start. Yeah, Crescent isn't really the best, just has name brand recognition. Like Kleenex is used to describe any facial or bathroom tissue. But yeah, I wouldn't over complicate things, just get a better adjustable wrench is all.Bought a 6" adjustable Task Force brand wrench at Lowes for some ridiculously low price - IIRC around 3 bucks.
Got it with the intention of having a beater wrench just for removing and installing lawnmower blades. When I say beater wrench, I mean that literally.
Routine use:
-wedge mower blade with 2"x4"
-adjust wrench to fit main nut on shaft
-beat wrench handle with hammer to free nut up
-remove nut with wrench
-change blade
-install nut with wrench
-beat wrench handle with hammer to tighten nut downI've done this procedure many times over the several years I've had that wrench, and both nut and wrench are still in fine shape. That Task Force wrench came with pretty decent fit and finish, and I must say it's held up well.
.
-
Wow! That looks perfect for regular use. I will definitely check that one out. Thanks!

It looks like it is the best of both wrenches. It won't scratch and strip heads, and it won't slip either.
I have been coming across all kinds of neat wrenches. There is even a SkeleWrench:
<a href="http://toolmonger.com/2008/04/16/skele-wrench/" target="_blank" rel="noopener noreferrer"><img src="http://toolmonger.com/wp-content/uploads/2008/04/wrench.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Everytime I think I have read all the reviews on this site, I discover another one:

-
I've got a tool like that, minus the blades. It was made by Craftsman too..
-
@Benner said:
After receiving a pocketwrench today, I am hoping that will cover me for most of my travelling nut and bolt tasks.congrats boss!

how are you liking it? you know I've had mine for over 10 years and never tried to use it for nuts and bolts!
I just use my dedicated adjustable wrenches/spanners. you know we want pictures mister!
-
As a entertainment lighting tech, there are several common sized bolts I deal with on a daily basis. Four such bolts are found on nearly every modern lighting fixture. A recent edition to my keychain was this little guy:

It fits the three bolts on a c-clamp, which is used to hang the light from a pipe:

It also fits the bolt that holds the yoke to the fixture. At around 2.5", its the smallest wrench I can carry and still do my job.
Another wrench entertainment technicians favor is the Lightspeed Wrench:
http://roadietools.com/lightspeed.html -
@gafftapegreenia said:
As a entertainment lighting tech, there are several common sized bolts I deal with on a daily basis. Four such bolts are found on nearly every modern lighting fixture. A recent edition to my keychain was this little guy:

........It also fits the bolt that holds the yoke to the fixture. At around 2.5", its the smallest wrench I can carry and still do my job.
Whoa, that thing looks like it was machined from solid billet. You don't see that very often these days. :o
-
And that's just the tip of the iceberg when it comes to specialized lighting wrenches, there is also
The mongo wrench

http://www.thelightsource.com/products/22/viewand the clamp stick wrench

Aluminum and steel, both are machined from solid metal.
-
@gafftapegreenia said:
And that's just the tip of the iceberg when it comes to specialized lighting wrenches, there is alsoThe mongo wrench

http://www.thelightsource.com/products/22/viewGood gracious that Mongo is beautiful. 8) (As are most things machined from solid)
-
After receiving a pocketwrench today, I am hoping that will cover me for most of my travelling nut and bolt tasks.
congrats boss!

how are you liking it? you know I've had mine for over 10 years and never tried to use it for nuts and bolts!
I just use my dedicated adjustable wrenches/spanners. you know we want pictures mister!
I really like it. It is one nicely made piece of kit. :)
Photo's will of course follow. ;)
-
Went scouting for wrenches today, and found a few interesting ones:
Gator Grip ETC-200MO Universal Socket
It's a great idea but I have my doubts as to how well it works, as well as how long it will last.

Then I found the IDL ViperGrip
I played with them a bit. They are small and light, and seemed fairly sturdy. But some of the parts seemed a little too intricate and finicky. I would really need to try one out to judge it.

And lastly, I found these Irwin Lock Pliers
These are basically vise grips but with jaws that are not supposed to strip the heads of hex nuts. Looks good but I think I would rather go with the Stanley locking adjustable wrench mentioned earlier (That is what I was actually looking for).

I also looked at a number of adjustable wrenches, including a set of Channel Locks. All of them had about as much play in the lower jaws as my current wrench. Mind you, none of them were really high end. They were mainly Canadian Tire brands and Craftsman. The Channel Locks went for about $25.
-
I need an excuse to carry something so purdy.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login