Leatherman PST chronology project
-
Except for the date codes my PST is same as Spoons PST #3 :) A 94 model without Hard Wire Notch :D
PST #3
• Rivets or knurled screws?
Knurled screws.
• Lanyard attachment?
Yes
• (Old) small diameter or (new) large diameter plier pivot?
Old
• LEATHERMAN cast into plier pivot, along with USA or TOOL?
Yes, USA
• A hard wire cutter notch?
No
• Handles stamped with what? (see pictures in next post for examples)
Leatherman Tool, Portland OR, US REG TM 1325473
• Inch ruler only, or inch/metric?
Inch/metric
• Date codes? What are they?
0794/0794
• Drop point knife blade or clip point?
Clip point
• Knife blade tang stamped LEATHERMAN, JAPAN, or USA?
Leatherman USA -
Thanks Spoon and Poncho. Your information has already prompted some changes in my original post.
What now reads as this:
*1992?
• Date codes addedMid-1990's?
• Hard wire notch added
• Handles no longer stamped with REG or PAT number
• Backside of handles stamped for the first time, with LEATHERMAN TOOL
• Clip portion of knife blade made shorter (no longer a Saber) *Used to read as this:
*1992?
• Date codes added
• Hard wire notch addedMid-1990’s?
• Handles no longer stamped with REG or PAT number
• Backside of handles stamped for the first time, with LEATHERMAN TOOL
• Clip portion of knife blade made shorter. (no longer a saber)*Spoon, the fact that you have two 1996 tools, one with US REG TM markings and one without, would seem to indicate that is the year they dropped that info.
-
@J-sews said:
Does your PST have:• Rivets or knurled screws?
Knurled
• Lanyard attachment?
SYes
• (Old) small diameter or (new) large diameter plier pivot?
Don't know, need basis of comparison
• LEATHERMAN cast into plier pivot, along with USA or TOOL?
Leatherman and USA
• A hard wire cutter notch?
No, only self-inflicted damage
• Handles stamped with what? (see pictures in next post for examples)
Leatherman(R) Tool; US REG TM 1325473; PORTAND OR
• Inch ruler only, or inch/metric?
Inch/Metric
• Date codes? What are they?
0294/0394
• Drop point knife blade or clip point?
Clip Point (I think)
• Knife blade tang stamped LEATHERMAN, JAPAN, or USA?
Leatherman USAAlso has a Marlboro Country Store stamp on the reverse of the handle. It's amazing how many cigarette cartons you can find on the streets of NYC just walking around as a kid.
It's also notable that Spoon has two 96 PSTs, only with hard wire cutter and one without. Maybe that's the year it was added in?
-
@woofer said:
.......It's also notable that Spoon has two 96 PSTs, only with hard wire cutter and one without. Maybe that's the year it was added in?Good catch Woofer, thanks! (chronology in first post has now been updated)
And thanks for the info. I'll snap some pics here so you know what I mean about plier pivots and knife blades.
-
Oookay:
PST 1 (Black Oxide)
• Rivets or knurled screws?
Knurled
• Lanyard attachment?
Yes
• (Old) small diameter or (new) large diameter plier pivot?
Old (with cap crimper)
• LEATHERMAN cast into plier pivot, along with USA or TOOL?
LEATHERMAN TOOL
• A hard wire cutter notch?
No
• Handles stamped with what? (see pictures in next post for examples)
US REG TM 1325473
• Inch ruler only, or inch/metric?
Both
• Date codes? What are they?
0493
• Drop point knife blade or clip point?
Pointier than the regular (later) blade whatever that is!
• Knife blade tang stamped LEATHERMAN, JAPAN, or USA?
Leatherman USAI'll post some more up tomorrow Bob as it's late here!
-
-
To elaborate on this business of pivots and blades, please see the following pics:

Sometime around the year 2000? (need more date info please) they switched to the new style plier head, which is obviously stronger than the old one was.
The middle style blade is nicknamed the "saber" because of its big sweeping clip point. Later on they made the clip point smaller (top picture) -
Knurled screws
Lanyard attachment
Large pivot (I think)
LEATHERMAN name around pivot, the other word is ground out as if the mold was altered
Hard wire cutter
Metric & inch ruler
Date codes, 0601 on both.
Clip point blade
Tang stamped LEATHERMAN USA
-
Oookay:
• LEATHERMAN cast into plier pivot, along with USA or TOOL?
LEATHERMAN TOOLDave, when you get a moment could you double check this? I would think a 1993 model would have USA cast on the plier pivot.
Thanks! :)
Thought I was answering about the handle stampings - sorry. Yes, of course it is Leatherman USA. -
@appletree_man said:
LEATHERMAN name only around pivot, the other word is ground out as if the mold was alteredThat's interesting. I've seen the Juice models with USA ground out, but never a PST. Keep hold of that one appletreeman ( or trade it with me :D ).
Bob - it is the middle of the three blades (sabre) on the PST I mentioned.
-
-
LEATHERMAN name only around pivot, the other word is ground out as if the mold was altered
That's interesting. I've seen the Juice models with USA ground out, but never a PST. Keep hold of that one appletreeman ( or trade it with me :D ).
Yes, I'd like to see a picture of that plier pivot ATM! :)
-
Couple of snaps.


-
For those that don't know, the "USA" was ground out on some tools at about the time of "that" court case. Best theory I've heard is that a large quantity of castings saying "USA" were still in stock in Oregon when the ruling / decision to drop the USA was made. Looks like they just ground it out to save getting any more fines.
Since then, the USA has been replaced by the word "TOOL", and many of the newer models simply say "LEATHERMAN" now.
Thanks fo rthe pics ATM.
-
PST (Black Oxide)
• Rivets or knurled screws?
Knurled
• Lanyard attachment?
Yes
• (Old) small diameter or (new) large diameter plier pivot?
Old
• LEATHERMAN cast into plier pivot, along with USA or TOOL?
LEATHERMAN USA
• A hard wire cutter notch?
No
• Handles stamped with what? (see pictures in next post for examples)
Leatherman Tool Portland Or us reg tm 1325473
• Inch ruler only, or inch/metric?
Both
• Date codes? What are they?
only one handle stamped 1292
• Drop point knife blade or clip point?
Saber
• Knife blade tang stamped LEATHERMAN, JAPAN, or USA?
Leatherman USA -
Ah, I see.
By eye it was difficult to see if it was the mold that had been altered, or the actual finished pliers ground down. But from Dave's info and the closer photo it's the latter.If anyone is still interested in it, i'd trade for a PST II ;)
-
I can confirm that my 0294/0394 PST has the smaller pivot, no hardwire notch, and the knife blade is of the saber-type.
-
-
:o Can't believe you can tell that they ground it out
wonder why thy didn't try to cover it up a little :( Maybe they where flamed about having to take the made in USA part out
Most things that claim they are USA made really isn't anyway >:( So why did California do that
:D -
Bob - it is the middle of the three blades (sabre) on the PST I mentioned.
Ahh good, so we've narrowed it down to sometime after 1993 that they switched to the new knife blade. (Darn, I should have been asking about this from the start so we could see what Spoony's 1996's were) :-\
My OP has been updated, the only one of four has the Saber blade.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login