Repurchased MTs
-
@demel414 said:
So I had bought a Gerber Flik from Menards to actually test out a gerber. It seemed ok but not something I would use. So I returned it. However after thinking about the tools I use the most (knife, pliers, and scissors) I realized besides the useless drivers, I liked everything else about the tool. Especially how it looks, so needless to say it is back. So what mts have you repuchased after giving away?Repurchased a Skeletool and sold it 3 or 4 times. Same with the Juice S2 and C2. Blast, Fuse, Kick, Wave, Charge TTi at least once. Kershaw Cryo. Spyderco Endura. Probably others, but can't think of them right now.
-
Rebar, it came and gone at least 6 or 7 times yet currently I don't own one.
A. I gifted out my Rebar because I have Mini-Surge, thinking I would never need it again.
B. Every now and then I buy one again because I remember how small Rebar is yet still offers a full selection of tools.
Repeat A.
Repeat B.
Repeat A.
Repeat B.
Repeat A.
Repeat B.
Repeat A.
Repeat B.
Repeat A.
Repeat B.
-
What is this giving away bit?

-
Leathermans seem to have that effect. lol
-

Sideclip: Traded one with advertising as I didn't really see the appeal of the tool at the time, and since replaced with a plain one. Glad to have tried it again
I even have a spare on the way :)Juice CS4: Gave away the first one (lots of problems with it), decided to try it again and the second one was no better ::)
Juice XE6: See CS4 above ...

Rebar: Didn't get on with it - sold it. Second time round, I bought a BO one with proper pliers in (from a Fuse or Wave) and modded it to remove the blades and put scissors in. Better but still needs tweaking. Strong possibility I still won't be fully happy with it which is why it's on the backburner
Blast: Didn't get along with it - too bulky. Second time I got a BO one purely to break for parts for making a rather special knifeless Fuse mod
Now I just tend to get old Leatherman models, or newer Gerber models.
Cheaper, better ergonomics, less hassle -
@50ft-trad said:

Sideclip: Traded one with advertising as I didn't really see the appeal of the tool at the time, and since replaced with a plain one. Glad to have tried it again
I even have a spare on the way :)Juice CS4: Gave away the first one (lots of problems with it), decided to try it again and the second one was no better ::)
Juice XE6: See CS4 above ...

Rebar: Didn't get on with it - sold it. Second time round, I bought a BO one with proper pliers in (from a Fuse or Wave) and modded it to remove the blades and put scissors in. Better but still needs tweaking. Strong possibility I still won't be fully happy with it which is why it's on the backburner
Blast: Didn't get along with it - too bulky. Second time I got a BO one purely to break for parts for making a rather special knifeless Fuse mod
Now I just tend to get old Leatherman models, or newer Gerber models.
Cheaper, better ergonomics, less hassleLess hassle to purchase? Whats you fav gerber?
-
Got a Wave, then traded it to free up funds for another purchase. I regretted it, and purchased another (a good deal on one used from evil-bay).
Strangely, as much as folks love the Spirit, I had one and got rid of it (again to free up funds to try new things). I miss it, but nowhere near as bad as I missed the Wave. To each their own.
Vic Climber. Jeez. Had one, sold it. Got another, traded it. Got ANOTHER, swapped out its stay-glow scales to my Supertinker, and was considering getting rid of it, then just got new Sapphire scales for it.
I had a Vic Small Tinker, and got rid of it, then decided I liked it so much I got another. That's okay, because the first one was an older model, with some collector-ish value, and I'm glad it went to a good home. I'm fine with a new one. So that one might not actually count.
There ARE a few other tools I've had and gotten rid of, and am now strongly considering getting again. Yes, the Spirit is among them. As is the Vic Explorer.
-
@demel414 said:
@50ft-trad said:

Sideclip: Traded one with advertising as I didn't really see the appeal of the tool at the time, and since replaced with a plain one. Glad to have tried it again
I even have a spare on the way :)Juice CS4: Gave away the first one (lots of problems with it), decided to try it again and the second one was no better ::)
Juice XE6: See CS4 above ...

Rebar: Didn't get on with it - sold it. Second time round, I bought a BO one with proper pliers in (from a Fuse or Wave) and modded it to remove the blades and put scissors in. Better but still needs tweaking. Strong possibility I still won't be fully happy with it which is why it's on the backburner
Blast: Didn't get along with it - too bulky. Second time I got a BO one purely to break for parts for making a rather special knifeless Fuse mod
Now I just tend to get old Leatherman models, or newer Gerber models.
Cheaper, better ergonomics, less hassleLess hassle to purchase? Whats you fav gerber?
Less hassle trying than feeling I have to to fix the tool up in order to be happy with it. It's easier to accept a few "imperfections" on a tool, or aspects you don't appreciate when it comes at a lower cost. While Leatherman is a higher end tool, I often find Gerbers to be better value overall
Favourite Gerbers are probably Dime, Diesel, Balance, MP400 andd MP700. I have actually modded a MP400 and Diesel too, but am happier with the way they come as stock than I have been with similarly equipped Leatherman tools, and my stock Diesel still gets carry time too.
I must add, there are several Leatherman tools I use and carry, but aside from ones that I've tweaked (Fuse, Kick) it tends to be the older ones (Mini, PST, Sideclip) that win pocket time. I do have a soft spot for the Wave/Charge line too, but they tend to be used more at home than carried
-
The LM Surge is the only one that I repurchased. I wore the first one clear out and replaced it with a new one.
Nate
-
@ducttapetech said:
The LM Surge is the only one that I repurchased. I wore the first one clear out and replaced it with a new one.Nate

-
I got a thing with waves.
Ive had a few and gave all but one away to friends family.
And sure I'll buy one again.

-
What is this giving away bit?

I am trying to make this world a better place by gifting MT to friends and family. All my employees receive Rebar+Micra Combe when they were hired, and I recommend them to carry at least one tool from the combo at all time.
What kind of work do these employees do?
Sent from my iPad using Tapatalk
-
@ducttapetech said:
The LM Surge is the only one that I repurchased. I wore the first one clear out and replaced it with a new one.Nate
I currently have my eyes on a bo surge. It has one of the best loadouts.
-
What is this giving away bit?

I am trying to make this world a better place by gifting MT to friends and family. All my employees receive Rebar+Micra Combe when they were hired, and I recommend them to carry at least one tool from the combo at all time.
Everyone should try at LEAST one.
-
@s2mason said:
What is this giving away bit?

I am trying to make this world a better place by gifting MT to friends and family. All my employees receive Rebar+Micra Combe when they were hired, and I recommend them to carry at least one tool from the combo at all time.
What kind of work do these employees do?
Sent from my iPad using Tapatalk
Most are desk jockeys ; some are field techs who programm fire panels, troubleshooting.
-
@s2mason said:
What is this giving away bit?

I am trying to make this world a better place by gifting MT to friends and family. All my employees receive Rebar+Micra Combe when they were hired, and I recommend them to carry at least one tool from the combo at all time.
What kind of work do these employees do?
Sent from my iPad using Tapatalk
Most are desk jockeys ; some are field techs who programm fire panels, troubleshooting.
So.......are you hiring?
Nate
-
I'm glad I'm not the only crazy person who does this :D . I've sold my skeletool and re bought it twice. I've also sold and re bought a Gerber MP600, a Juice S2, Several Waves, Several Kicks, and a Rebar.
-
@s2mason said:
[quote author=Chako link=topic=57379.msg1033975#msg1033975 date=1422924906]
What is this giving away bit?
I am trying to make this world a better place by gifting MT to friends and family. All my employees receive Rebar+Micra Combe when they were hired, and I recommend them to carry at least one tool from the combo at all time.
What kind of work do these employees do?
Sent from my iPad using Tapatalk
Most are desk jockeys ; some are field techs who programm fire panels, troubleshooting.
So.......are you hiring?
Nate
[/quote]
Always. -
@s2mason said:
What is this giving away bit?

I am trying to make this world a better place by gifting MT to friends and family. All my employees receive Rebar+Micra Combe when they were hired, and I recommend them to carry at least one tool from the combo at all time.
What kind of work do these employees do?
Sent from my iPad using Tapatalk
Most are desk jockeys ; some are field techs who programm fire panels, troubleshooting.
I supervise building controls and fire/security techs. Half my time is in the field and a multitool is your best friend. It's rarely the ideal tool, but it's almost always the "best" tool because it's the one you have with you.
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login