One of the reasons I keep picking Gerber over Leatherman ...
-
Thanks chaps

@Cupboard said:
Thanks for this thread
Worryingly, I do find myself agreeing with almost everything you've said, I'm sure that's not supposed to happen >:DIf it's any consolation, it's as worrying for me as it is for you :P :D
@Cupboard said:
The problem with the sliding pliers is that you can't open them out inline for use as a screwdriver and as such need a huge amount of clearance round the screw head. I rarely use the screwdrivers with the handles folded up in the form you store the tool it, it's almost always with the scrwdriver out at the end of a handle, the plier head folded in to the other end handle and my hand gripping the handle with the pliers in.I tend to be doing a lot less in the way of automotive and electrical panel work than you, Tom. As such, I don't tend to come across the restricted clearance issues quite as much. Nor do I tend to need that extended reach. Screwdriver use for me tends to be more "domestic". That said you have a very valid point there, and if that is what you need to do, then that is what the tool you carry must offer.
Maybe you ought to do a rundown on driver types like I've tried to do here with pliers, to show why certain tools off the best type of drivers (size/reach/configuration)
;)@Cupboard said:
I do wonder how hard it would b to modify a Leatherman (or anything else with butterfly pliers) to reduce the span needed. I think it would just be a simple case of filing down the plier back stop in the handles, though on a Wave/Charge that would weaken the area because there isn't much meat there as a result of the blade lock.Maybe I'll do that one evening once I've got my house back together and I'm not playing with something with wheels

I have considered it myself, but it's not work I'm happy doing for fear of causing sloppy pliers.
If you decide to give it a go, let us know how you get on
@Kampfer said:
Wonderful insights AL,
Here are are my inputs:
Nothing is perfect for every job, MT are designed to handle daily small tasks IMO. For bigger jobs, one should use dedicated tools if possible.
The MT you mention they do fall short when they are used to bite on large objects, but I think they are fine for deal with smaller objects like small nuts, cutting small wires. I am not a plumber and the only time I had such trouble was when I change a shower head in my house, none of my MT has pliers that open wide enough to grip on the pipe except Surge, the like you said, its handles spread way too wide for me to use it one hand. It got the job done, but clearly shown Surge wasn't designed for such task.Cheers mate
My take is that multitools are there to tackle the unknown when dedicated tools might not be available. The more capable the pliers are, the more "surprise" tasks I can handle. With the current Leatherman and Victorinox offerings, the bigger the pliers, the smaller the capability I can handle. It's totally counter productive. To me, it's not worth carrying a bigger and heavier tool with less capable pliers, just for a fractionally longer blade/saw/file.Such as tightening a 13mm A/F nut on a car battery is significantly easier with a smaller (4") framed tool due to the less splayed handles, with the exception of the Diesel and adjustable/locking pliers tools. Bigger hand tools should be capable of bigger tasks, but not need bigger hands in order to do it. Large nuts and bolts are tightened with spanners with longer handles, but they don't need to be the diameter of a donkey's leg so only people with XXL hands can use them. Manufacturers need to recognise that people with average sized hands, or indeed smaller hands, or left hand dominant, or whatever, need to be able to handle a range of tasks too. If their tools cannot accomodate such people (or vice versa), they are denying themselves a large share of market potential ... because there are other tools out there which WILL suit those people
@tosh said:
Having just read this entire thread in one sitting, I must say you've really explained your arguments in a very logical way Al
Having now seen your point of view it makes me wonder just what parameters leathermans designers opt for when designing new models. Because it certainly doesn't look like they're designed that well TBH.
Here in the UK leathermans are ridiculously expensive considering that they are a compromise to "Real" tools.
Thank you
I think Leatherman do a good job of their plier heads (though I'm not a fan of the indexables ones), and tend to do a reasonal job of most of their supporting tools, some of the larger framed tools are exemplory, though some of their smaller (Juice and below) are pretty poor. Where they fall down is how they incorporate it into a whole. Assymetrical handles, flared/splayed handles, making a knife blade locking but drivers (which are more likely to fold in use) non-locking.Cost is certainly a factor for us on this side of the pond, where a Victorinox tool in many instances could be a cheaper option. I'd like to see more energy put into ergonomics, and less into hype and lies. The fact is that many of their tools are unusable for some users. They need to recognise this if they are going to increase their market share. A Surge pliers can handle far less than a significantly cheaper Diesel can in my hands. Make that same tool more usable for more people, and you can win more orders. As it stands there is a large percentage of their tools that I (and other people) will instantly disregard and not consider buying due to these very basic issues.
-
@50ft-trad said:
OP
Excellent commentary, thanks for taking the time to post w/ pictures
You really pointed out a "pro" for the Gerber MP
Thank you
I appreciate the comment 
Well, let's put this way
Your narrative made me appreciate my MP600 a lot more and realize the limitation of a some others I own -
@50ft-trad said:
OP
Excellent commentary, thanks for taking the time to post w/ pictures
You really pointed out a "pro" for the Gerber MP
Thank you
I appreciate the comment 
Well, let's put this way
Your narrative made me appreciate my MP600 a lot more and realize the limitation of a some others I ownGood to hear
All multitools are limited in some way or other. The key is finding the right tool/s with the right mix of attributes for you. Some might find they have small hands but need OHO blades - maybe a Flik would be better suited for them, but they have the issue of stumpy drivers. For someone who needs pliers with even greater capacity, in which case a Grappler, Crunch or Schrade Vise Grips might be more fitting. The other thing is not being frightened of relying on more than one tool. Sometimes it might be better to have a pliers tool plus a SAK or shears based tool rather than trying to handle one tool with everything. It's also more important in my mind to focus on the tools themselves rather than what name is on the side. A high end tool that doesn't suit your needs is not as good as a lower end tool that doesWhen I had a boat, I had a Core, a Swissgrip and a Gerber MP600 DET modified to have shear heads. Between those three (and a 4" puukko knife), there wasn't much I couldn't handle. Knowing what I know now, maybe I should have switched the Core for a Diesel, and switched the Swissgrip for a Minigrip and Bahco Laplander
Maybe I ought to get pics of the Swissgrip in this thread too ... -
@Cupboard said:
The problem with the sliding pliers is that you can't open them out inline for use as a screwdriver and as such need a huge amount of clearance round the screw head. I rarely use the screwdrivers with the handles folded up in the form you store the tool it, it's almost always with the scrwdriver out at the end of a handle, the plier head folded in to the other end handle and my hand gripping the handle with the pliers in.I have thought this too and it's one thing that puts me off an OHT.
@50ft-trad said:
The fact is that many of their tools are unusable for some users. They need to recognise this if they are going to increase their market share. A Surge pliers can handle far less than a significantly cheaper Diesel can in my hands. Make that same tool more usable for more people, and you can win more orders. As it stands there is a large percentage of their tools that I (and other people) will instantly disregard and not consider buying due to these very basic issues.Ahh but because tools like the Surge suit bigger hands then they are catering for a different share of the market. There is no 'one size fits all' IMO. I tend to steer away from the smaller ones.
@Kampfer said:
Nothing is perfect for every job, MT are designed to handle daily small tasks IMO. For bigger jobs, one should use dedicated tools if possible.
The MT you mention they do fall short when they are used to bite on large objects, but I think they are fine for deal with smaller objects like small nuts, cutting small wires.Lots of people here talk about using their pliers on nuts. I wouldn't dream of doing this unless it was an emergency.
-
@Syncop8r said:
Lots of people here talk about using their pliers on nuts. I wouldn't dream of doing this unless it was an emergency.If I have to use an MT on nuts I strongly prefer to use my LM Crunch as there is much less chance of slipping and damaging the nut and/or my hand. I know they are a bit fiddly to use as pliers, but they are my preferred option if a dedicated tool (eg socket or spanner) isn't available.
-
@Kampfer said:
Nothing is perfect for every job, MT are designed to handle daily small tasks IMO. For bigger jobs, one should use dedicated tools if possible.
The MT you mention they do fall short when they are used to bite on large objects, but I think they are fine for deal with smaller objects like small nuts, cutting small wires.Lots of people here talk about using their pliers on nuts. I wouldn't dream of doing this unless it was an emergency.
[/quote]
I done that with a MT when I put together a dinning table, just for fun, I had dedicated tools near by. -
@50ft-trad said:
The fact is that many of their tools are unusable for some users. They need to recognise this if they are going to increase their market share. A Surge pliers can handle far less than a significantly cheaper Diesel can in my hands. Make that same tool more usable for more people, and you can win more orders. As it stands there is a large percentage of their tools that I (and other people) will instantly disregard and not consider buying due to these very basic issues.
Ahh but because tools like the Surge suit bigger hands then they are catering for a different share of the market. There is no 'one size fits all' IMO. I tend to steer away from the smaller ones.
Are the smaller (Fuse, Wave, MP400) multitools particularly uncomfortable for you, or do the larger framed tools just feel more reassuring?
-
... and as for using pliers as a spanner .. yes, emergencies only

-
@parnass said:
Excellent series of posts, 50ft-trad. I concur with several points concerning the ease of using Gerber vs. non-Gerber pliers, but I think the majority of your analysis addresses gripping larger objects.I've been thinking about this again recently, and wondering if I ought to take a series of wire cuting pics. This may be a task that people need to do more frequently, and might be a better comparison for people. It might also show slightly different results, based on the shapes of the various plier heads.
Worth doing?
-
@50ft-trad said:
Excellent series of posts, 50ft-trad. I concur with several points concerning the ease of using Gerber vs. non-Gerber pliers, but I think the majority of your analysis addresses gripping larger objects.
I've been thinking about this again recently, and wondering if I ought to take a series of wire cuting pics. This may be a task that people need to do more frequently, and might be a better comparison for people. It might also show slightly different results, based on the shapes of the various plier heads.
Worth doing?
Yes, please. I agree, that would be a very interesting comparison.

-
Go for it Al - your comparisons are always interesting

-
I've done some myself, I didn't put up pictures of every combination because it was getting silly.
</topic/47745
Having a look back at that, I see that I didn't think the Wingman was too bad. Well I've currently god a Sidekick on my desk at work as an emergency spare, and the sire cutters on that are terrible. They just don't meet.
-
@50ft-trad said:
Excellent series of posts, 50ft-trad. I concur with several points concerning the ease of using Gerber vs. non-Gerber pliers, but I think the majority of your analysis addresses gripping larger objects.
I've been thinking about this again recently, and wondering if I ought to take a series of wire cuting pics. This may be a task that people need to do more frequently, and might be a better comparison for people. It might also show slightly different results, based on the shapes of the various plier heads.
Worth doing?
Yes.
I've done a lot of testing but never bothered with pics. -
@Cupboard said:
I've done some myself, I didn't put up pictures of every combination because it was getting silly.</topic/47745
Having a look back at that, I see that I didn't think the Wingman was too bad. Well I've currently god a Sidekick on my desk at work as an emergency spare, and the sire cutters on that are terrible. They just don't meet.
We might be at cross purposes here Tom. I wasn't thinking in terms of cutting performance, as you and 3rdpig have got that well sorted, but more in respect of ergonomics again. I was just a little mindful that whilst this comparison is within the capacities of the pliers (on most of them at least), it might be outside what users are liable to do regularly with their tools
-
.... and before I start thinking through how best to do this, there's a strong possibility that Gerber will have a distinct ***ergonomic ***advantage again on some tools, not just due to the handle differences as already highlighted, but because they sometimes choose anvil cutters rather than bypass. Bypass cutters have to open a way to become level, before opening further to accommodate the wire. I don't know how much a difference that's likely to make, but I'd imagine it will have at least some effect on the final handle position
-
@zoidberg said:
If I didn't use pliers on nuts I wouldn't bother carrying them. ::)Reading this i assume you are no trained mechanic/engineer? :D
Most of us hate nuts that are damaged by grabbing them with pliers, there are dedicated tools out there - and pliers are only an emergency tool for use on nuts.
-
If I didn't use pliers on nuts I wouldn't bother carrying them. ::)
Reading this i assume you are no trained mechanic/engineer? :D
Most of us hate nuts that are damaged by grabbing them with pliers, there are dedicated tools out there - and pliers are only an emergency tool for use on nuts.
I also hate nuts that are damaged because the last numpty to turn them used oversized, worn, or sprained spanners. In 25 years of engineering, I have come across plenty of hex nuts that can <u>**only **</u>be turned with pliers, waterpump pliers, and stilsons .... or hammer and chisel/screwdriver ::)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:ahhh